氟橡胶包覆层对纳米铝粉性能的影响研究

doi:10.3969/j.issn.1000-1093.2019.08.008

摘要/Abstract

摘要： 氟橡胶包覆改性纳米铝粉是近年来含能材料领域的研究热点。为了获得包覆层对纳米铝粉性能的影响规律，将电爆法制备的铝粉包覆5%、10%、15%3种不同含量的氟橡胶，并引入钝化纳米铝粉进行对比研究。利用扫描电镜、透射电镜、物理吸附分析仪、X射线光电子能谱仪及同步热分析仪表征改性前后纳米铝粉的表观形貌、包覆层厚度、比表面积、表面元素价态以及热响应行为，测定活性铝含量和燃烧热。结果表明：改性纳米铝粉形貌规整、粒径分布均匀，比表面积略高于钝化纳米铝粉；氟橡胶包覆层通过化学键吸附在铝粉表面，增强了纳米铝粉的热稳定性，阻止了纳米铝粉的进一步氧化，使其活性铝含量高于自然失活的纳米铝粉，最高达到85.85%；受氟橡胶包覆层的影响，改性纳米铝粉的燃烧热高于钝化纳米铝粉。

关键词: 纳米铝粉, 氟橡胶, 包覆改性, 燃烧性能

Abstract: In order to obtain the influence of coating layers on the properties of nano-aluminum powders, the nano-aluminum powders prepared by the electric explosion method are coated with 5%, 10% and 15% of fluororubber. The surface morphologies, coating thicknesses, specific surface areas, elemental valence states and thermal responses of modified nano-aluminum powders are characterized using scanning electron microscope, transmission electron microscope, physical adsorption analyzer, X-ray photoelectron spectrometer and simultaneous thermal analyzer. And the active aluminum contents and combustion heat of different samples were measured. The results show that the specific surface areas of the modified nano-aluminum powders are slightly large than that of the passivated nano-aluminum powders. Fluororubber coatings chemically adsorb on the surface of nano-aluminum powders, which enhances the thermal stability of nano-aluminum powders, prevents the aluminum powders from further oxidation, and makes one of the contents of active aluminum up to 85.85%. The fluororubber promotes the combustion of modified nano-aluminum powders, so that the combustion heat of the modified nano-aluminum powders is more than that of the passivated nano-aluminum powders. Key

Key words: nano-aluminumpowder, fluororubber, coatingmodification, combustionperformance

中图分类号:

TQ560.4
TJ55

闫涛，任慧，马爱娥，焦清介，王慧心. 氟橡胶包覆层对纳米铝粉性能的影响研究[J]. 兵工学报, 2019, 40(8): 1611-1617.

YAN Tao, REN Hui, MA Ai'e, JIAO Qingjie, WANG Huixin. Effect of Fluororubber Coating on the Properties of Nano-aluminum Powders[J]. Acta Armamentarii, 2019, 40(8): 1611-1617.

参考文献

［1］何宁, 向聪, 李伟, 等. 硝基甲烷与铝粉混合物燃爆特性实验研究[J]. 兵工学报, 2018, 39(1):111-117.
HE N, XIANG C, LI W, et al. Experimental study on deflagrating characteristics of nitromethane aluminum powder [J]. Acta Armamentarii, 2018, 39(1):111-117. (in Chinese)
[2］昝文涛, 洪滔, 董贺飞. 铝粉尘云团爆轰温压效应的数值模拟[J]. 兵工学报, 2018, 39(1):101-110.
ZAN W T, HONG T, DONG H F. Numerical simulation of detonation temperature and pressure effects of aluminum powder cloud [J]. Acta Armamentarii, 2018, 39(1):101-110. (in Chinese)
[3］ YOUNG G, WANG H, ZACHARIAH M R. Application of nano-aluminum/nitrocellulose mesoparticles in composite solid rocket propellants [J]. Propellants, Explosives, Pyrotechnics, 2015, 40(3): 413-418.
[4］李鑫, 赵凤起, 郝海霞, 等. 不同类型微/纳米铝粉点火燃烧特性研究[J]. 兵工学报, 2014, 35(5):640-647.
LI X, ZHAO F Q, HAO H X, et al. Research on ignition and combustion properties of different micro/ nano-aluminum powders [J]. Acta Armamentarii, 2014, 35(5):640-647. (in Chinese)
[5］ VADHE P P, PAWAR R B, SINHA R K, et al. Cast aluminized explosives (review) [J]. Combustion, Explosion, and Shock Waves, 2008, 44(4):461-477.
[6］ LIU R, YANG L, ZHOU Z N, et al. Thermal stability and sensitivity of RDX-based aluminized explosives [J]. Journal of Thermal Analysis and Calorimetry, 2014, 115(2):1939-1948.
[7］ SON S F, YETTER R, YANG V. Introduction: nanoscale composite energetic materials [J]. Journal of Propulsion and Power, 2007, 23(4):643-644.
[8］ GROMOV A, TEIPEL U. Metal nanopowders—production, characterization, and energetic applications [M]. Weinheim, Germany : Wiley-VCH Verlag GmbH & Co., 2014: 367-380.
[9］ TEIPEL U. Energetic materials—particle processing and characterization [M]. Weinheim, Germany: WILEY-VCH Verlag GmbH & Co., 2005: 267-275.

[10］ ROSSI C. Al-based energetic nanomaterials—design, manufacturing, properties and applications [M]. Volume 2. London, UK: ISTE Ltd., and Hoboken NJ, US: John Wiley & Sons, 2015: 23-26.
[11］ JACOB R J, WEI B, ZACHARIAH M R. Quantifying the enhanced combustion characteristics of electrospray assembled aluminum mesoparticles [J]. Combustion and Flame, 2016, 167:472-480.
[12］ KWON Y, GROMOV A A, STROKOVA J I. Passivation of the surface of aluminum nanopowders by protective coatings of the different chemical origin [J]. Applied Surface Science, 2007, 253(12):5558-5564.
[13］ GROMOV A, ILYIN A, FRTER-BARTH U, et al. Characterization of aluminum powders: II. aluminum nanopowders passivated by non-inert coatings [J]. Propellants, Explosives, Pyrotechnics, 2006, 31(5):401-409.
[14］ DELISIO J B, HU X L, WU T, et al. Probing the reaction mechanism of aluminum/poly(vinylidene fluoride) composites [J]. The Journal of Physical Chemistry B, 2016, 120(24):5534-5542.
[15］ SIPPEL T R, SON S F, GROVEN L J. Aluminum agglomeration reduction in a composite propellant using tailored Al/PTFE particles [J]. Combustion and Flame, 2014, 161(1):311-321.
[16］ ALONSO C, MORATO A, MEDINA F, et al. Preparation and characterization of different phases of aluminum trifluoride [J]. Chemistry of Materials, 2000, 12(4):1148-1155.
[17］ MCCOLLUM J, MOREY A M, IACONO S T. Morphological and combustion study of interface effects in aluminum-poly(vinylidene fluoride) composites [J]. Materials & Design, 2017, 134:64-70.
[18］ ISRAELACHVILI J N. Intermolecular and surface forces [M]. Waltham, UK: Elsevier Inc., 2011: 381-387.
[19］张永明, 李虹, 张恒. 含氟功能材料 [M]. 北京: 化学工业出版社, 2008: 1-4.
ZHANG Y M, LI H, ZHANG H. Fluorine-containing functional materials [M].Beijing: Chemical Industry Press, 2008: 1-4.（in Chinese）
[20］ TRESSAUD A, DURAND E, LABRUGRE C. Surface modification of several carbon-based materials: comparison between CF₄ rf plasma and direct F₂-gas fluorination routes [J]. Journal of Fluorine Chemistry, 2004, 125(11):1639-1648.
[21］ WANG J, JIANG X J, ZHANG L, et al. Design and fabrication of energetic superlattice like-PTFE/Al with superior performance and application in functional micro-initiator [J]. Nano Energy, 2015, 12:597-605.
[22］ NOOR F, ZHANG H, KORAKIANITIS T, et al. Oxidation and ignition of aluminum nanomaterials [J]. Physical Chemistry Chemical Physics, 2013, 15(46):20176-20188.
[23］ TRUNOV M A, SCHOENITZ M, ZHU X, et al. Effect of polymorphic phase transformations in Al₂O₃ film on oxidation kinetics of aluminum powders [J]. Combustion and Flame, 2005, 140(4): 310-318.
[24］ EISENREICH N, FIETZEK H, JUEZ-LORENZO M, et al. On the mechanism of low temperature oxidation for aluminum particles down to the nano-scale [J]. Propellants, Explosives, Pyrotechnics, 2004, 29(3):137-145.
[25］ LEVITAS V. Burn time of aluminum nanoparticles: strong effect of the heating rate and melt-dispersion mechanism [J]. Combustion and Flame, 2009, 156(2):543-546.
[26］ HE W, LIU P L, GONG F Y, et al. Tuning the reactivity of metastable intermixed composite n-Al/PTFE by polydopamine interfacial control [J]. ACS Applied Materials & Interfaces, 2018, 10(38):32849-32858.
[27］ WATSON K W, PANTOYA M L, LEVITAS V I. Fast reactions with nano- and micrometer aluminum: a study on oxidation versus fluorination [J]. Combustion and Flame, 2008, 155(4):619-634.
[28］ KE X, GUO S F, ZHANG G S, et al. Safe preparation, energetic performance and reaction mechanism of corrosion-resistant Al/ PVDF nanocomposite films [J]. Journal of Materials Chemistry A, 2018, 6(36):17713-17723.
[29］ CROUSE C A, PIERCE C J, SPOWART J E. Synthesis and reactivity of aluminized fluorinated acrylic (AlFA) nanocomposites [J]. Combustion and Flame, 2012, 159(10):3199-3207.
[30］ KIM D W, KIM K T, MIN T S, et al. Improved energetic-behaviors of spontaneously surface-mediated Al particles [J]. Scientific Reports, 2017, 7(1):4659.

第40卷
第8期2019 年8月兵工学报ACTA
ARMAMENTARIIVol.40No.8Aug.2019

[1]	沈忱, 闫石, 姚杰, 焦清介, 廖明义, 常云飞. 液态氟橡胶改性端羟基嵌段共聚醚粘合剂及其对铝粉热氧化行为的影响[J]. 兵工学报, 2022, 43(4): 780-787.
[2]	梁泰鑫，吕秉峰，马忠亮，肖忠良. 一种随行装药的燃烧性能[J]. 兵工学报, 2015, 36(9): 1660-1664.
[3]	邹伟伟，郝晓琴，张志勇，党海燕，周伟良. 小口径可燃药筒及装药的燃烧性能研究[J]. 兵工学报, 2015, 36(8): 1423-1429.
[4]	李鑫, 赵凤起, 郝海霞, 罗阳, 徐司雨, 姚二岗, 李娜. 不同类型微/纳米铝粉点火燃烧特性研究[J]. 兵工学报, 2014, 35(5): 640-647.
[5]	黄振亚，范建芳，陈余谦. 叠氮硝胺发射药表面钝感新技术[J]. 兵工学报, 2014, 35(2): 182-187.
[6]	谢中元₁, 周霖，王浩，赵凯，罗一鸣，张宏亮. 高氯酸铵包覆层对硼粉燃烧性能的影响[J]. 兵工学报, 2014, 35(2): 194-199.
[7]	查明霞，马振叶，徐娟，秦红，徐司雨，赵凤起. 液相化学法制备纳米铝粉及其表征[J]. 兵工学报, 2014, 35(10): 1575-1580.
[8]	张衡, 安亭, 赵凤起, 张晓宏, 仪建华, 徐司雨. 没食子酸锆铜的制备及其在双基系推进剂中的燃烧催化作用[J]. 兵工学报, 2013, 34(6): 690-697.
[9]	窦燕蒙1，李国平1，罗运军1，葛震1，仪建华2，赵凤起2. 储氢合金/ AP / HTPB 推进剂的燃烧现象分析[J]. 兵工学报, 2013, 34(2): 162-167.
[10]	刘波，王琼林，刘少武，于慧芳，李达，姚月娟，潘清，魏伦. 改性单基药表层功能组分浓度分布对燃烧性能的影响研究[J]. 兵工学报, 2011, 32(5): 564-568.
[11]	崔庆忠，焦清介，彭晨光. 铝粉形态学特征对Al/KClO₄燃烧性能的影响[J]. 兵工学报, 2011, 32(11): 1327-1330.
[12]	李吉祯, 付小龙, 刘小刚, 樊学忠, 刘子如, 张腊莹. 高氯酸铵/铝粉—复合改性双基推进剂燃速与热分解的相关性研究[J]. 兵工学报, 2010, 31(10): 1351-1356.
[13]	祝明水，龙新平，蒋小华，何碧，蒋明. B/KNO3燃烧性能参数计算[J]. 兵工学报, 2005, 26(3): 320-322.
[14]	李颖，宋武林，谢长生，王爱华，曾大文. 纳米铝粉在固体推进剂中的应用进展[J]. 兵工学报, 2005, 26(1): 121-125.