微小型起爆序列初步设计与性能研究

doi:10.3969/j.issn.1000-1093.2017.03.007

兵工学报 ›› 2017, Vol. 38 ›› Issue (3): 460-465.doi: 10.3969/j.issn.1000-1093.2017.03.007

微小型起爆序列初步设计与性能研究

解瑞珍, 李黎明, 刘兰, 任小明, 薛艳

（陕西应用物理化学研究所应用物理化学重点实验室，陕西西安 710061）

收稿日期:2016-06-15 修回日期:2016-06-15 上线日期:2017-04-24
作者简介:解瑞珍(1977—)，女，高级工程师。E-mail: xieruizhen@126.com

Study of Design and Performance of Micro Initiation Train

XIE Rui-zhen, LI Li-ming, LIU Lan, REN Xiao-ming, XUE Yan

(Science and Technology on Applied Physical Chemistry Laboratory，Shaanxi Applied Physics-chemistry Research Institute, Xi'an 710061, Shaanxi, China)

Received:2016-06-15 Revised:2016-06-15 Online:2017-04-24

摘要/Abstract

摘要： 为适应引信微小型化发展的需求，采用基于微机电系统工艺技术，开展微小型起爆序列的设计及性能测试研究。起爆序列初步集成了引信安全与解除保险及发火功能，体积为3 cm³；该结构包括底层、中间层和顶层，其中底层包括隔断单元和传爆药装药，中间层由微雷管和硅基烟火微驱动器构成，顶层为信息控制电路。测试结果表明，微小型起爆序列实现了解除保险、安全隔爆与可靠传爆的功能，平均输出爆轰压力为10.85 GPa.

关键词: 兵器科学与技术, 火工品, 微起爆序列, 微雷管, 烟火微驱动器, 输出压力

Abstract: A micro initiation train is designed to meet the requirement of MEMS fuze. The micro initiation train integrates all the functions of a conventional mechanical safety and arm （S&A）fire system, and integrates them within 3 cm³. The architecture of the micro initiation train consists of bottom, intermediary and top layers. The bottom layer contributes to the mechanical arming and detonation transfer function. The intermediary layer is Si-based initiator and micro-pyrotechnical actuator. The top layer is the electronics and power supply. The test results show that the safe, arming and firing functions of micro initiation train are achieved, and the output pressure is about 10.85 GPa. Key

Key words: ordnancescienceandtechnology, initiatorandpyrotechnics, microinitiationtrain, microdetonator, micro-pyrotechnicalactuator, outputpressure

中图分类号:

TJ450.2

解瑞珍, 李黎明, 刘兰, 任小明, 薛艳. 微小型起爆序列初步设计与性能研究[J]. 兵工学报, 2017, 38(3): 460-465.

XIE Rui-zhen, LI Li-ming, LIU Lan, REN Xiao-ming, XUE Yan. Study of Design and Performance of Micro Initiation Train[J]. Acta Armamentarii, 2017, 38(3): 460-465.

参考文献

［1］ Hendershot J. Weapon fuzing/safety & arming technology programs overview[C]∥48th Annual Fuze Conference. Charlotte, NC, US: National Defense Industrial Association, 2004.
[2］ Burke P. XM1156 precision guidance kit (PGK) overview[C]∥54th Annual Fuze Conference. Kansas City, MO: National Defense Industrial Association, 2010.
[3］ Cope R. Navy overview[C]∥55th Annual Fuze Conference. Salt lake City, UT, US: National Defense Industrial Association, 2011.

[4］牛兰杰, 施坤林, 赵旭, 等. 微机电技术在引信中的应用[J]. 探测与控制学报, 2008, 30(6): 54-59.
NIU Lan-jie, SHI Kun-lin, ZHAO Xu, et al. Application of MEMS on fuzes[J]. Journal of Detection & Control, 2008, 30(6): 54-59. (in Chinese)
[5］ Lanterman D, Young T T, Smyth J. DoD MEMS fuze reliability evaluation[C]∥58th Annual Fuze Conference. Baltimore, MD, US: National Defense Industrial Association, 2015.
[6］ Renz R. MEMS based fuze technology[C]∥58th Annual Fuze Conference. Baltimore, MD, US: National Defense Industrial Association, 2015.
[7］ Taylor T Y, Jeffrey R S. DoD MEMS fuze reliability evaluation[C]∥59th Annual Fuze Conference. Charleston, SC, US: National Defense Industrial Association, 2016.
[8］ Xie R Z, Ren X M, Liu L, et al. Research on design and firing performance of Si-based detonator[J]. Defence Technology, 2014, 10(1): 34-39.
[9］解瑞珍, 刘兰, 任小明, 等. 硅基微雷管的原位装药及性能研究[J]. 兵工学报, 2014, 35(12): 1972-1977.
XIE Rui-zhen, LIU Lan, REN Xiao-ming, et al. Research on in-situ charge and performance of Si-based micro-detonator[J]. Acta Armamentarii, 2014, 35(12): 1972-1977. (in Chinese)

[10］ Xie R Z, Ren X M, Liu L, et al. Fabrication and tests of a Si-based initiator[J]. Journal of Beijing Institute of Technology, 2014, 23(1):78-82.
[11］解瑞珍, 薛艳, 任小明, 等. 桥区参数对Ni-Cr薄膜换能元发火性能的影响[J]. 火工品, 2012(1):18-20.
XIE Rui-zhen, XUE Yan, REN Xiao-ming, et al. Effect of bridge parameters on the firing sensitivity of Ni-Cr alloy thin film transducer elements[J]. Initiators & Pyrotechnics, 2012(1):18-20. (in Chinese)
[12］郭俊峰, 曾庆轩, 李明愉，等. 叠氮化铜驱动飞片起爆HNS-IV的研究[J]. 火工品, 2015(6):1-4.
GUO Jun-feng, ZENG Qing-xuan, LI Ming-yu, et al. Study on HNS-IV initiated by flyer driven by cupric azide[J]. Initiators & Pyrotechnics, 2015(6): 1-4. (in Chinese)

第38卷
第3期2017 年3月兵工学报ACTA
ARMAMENTARIIVol.38No.3Mar.2017

[1]	解瑞珍，褚恩义，戴旭涵，苏谦，薛艳，任小明，刘兰，刘卫. 微起爆序列设计及传爆与隔爆性能[J]. 兵工学报, 2021, 42(6): 1178-1184.
[2]	程立，董海平，穆慧娜，温玉全，张浩宇，汪靖程. 基于感度分布均值的火工品发火可靠性小样本评估方法[J]. 兵工学报, 2020, 41(12): 2444-2450.
[3]	易镇鑫，曹亚清，张琳，朱顺官，朱晨光. 新型碳基导电药无桥火工品研究[J]. 兵工学报, 2019, 40(8): 1596-1602.
[4]	郑子龙，张文超，秦志春，吴刚刚，俞春培，王嘉鑫，陈亚杰，叶家海，田桂蓉. 高钝感半导体桥发火性能研究[J]. 兵工学报, 2019, 40(5): 954-961.
[5]	娄伟鹏，郑长松，李和言，陈建文，张周立，马源. 高速《Symbol》v湿式换挡离合器排油阀临界开启和关闭压力研究[J]. 兵工学报, 2017, 38(9): 1665-1672.
[6]	王宪成，杨绍卿，马宁，赵文柱. 车辆柴油机缸套动载荷磨损计算模型研究[J]. 兵工学报, 2017, 38(9): 1673-1680.
[7]	孙皓泽，常天庆，王全东，孔德鹏，戴文君. 一种基于分层多尺度卷积特征提取的坦克装甲目标图像检测方法[J]. 兵工学报, 2017, 38(9): 1681-1691.
[8]	张玉燕，孙莎莎，王振春，曹海要，战再吉. 高速载流电枢表面瞬态温度场仿真与测量[J]. 兵工学报, 2017, 38(9): 1692-1698.
[9]	李臣明，宦超，石怀龙. 某箱式火箭炮对面目标分布式杀伤最优火力分配[J]. 兵工学报, 2017, 38(9): 1699-1704.
[10]	雷娟棉，张嘉炜，谭朝明. 小攻角下船尾外形对旋转弹丸马格努斯效应影响的数值研究[J]. 兵工学报, 2017, 38(9): 1705-1715.
[11]	李泽，闫晓鹏，栗苹，郝新红，王建涛. 扫频式干扰对调频多普勒引信的干扰机理研究[J]. 兵工学报, 2017, 38(9): 1716-1722.
[12]	张浩为，谢军伟，张昭建，宗彬锋，陈唐军. 基于混合自适应遗传算法的相控阵雷达任务调度[J]. 兵工学报, 2017, 38(9): 1761-1770.
[13]	李茂，侯海量，朱锡，黄晓明，李典，陈长海，胡年明. 结构间隙对芳纶纤维增强复合装甲结构抗侵彻性能的影响[J]. 兵工学报, 2017, 38(9): 1797-1805.
[14]	王鉴, 韩焱, 王黎明, 张丕状, 陈平. 弹丸在膛内运动的回波信号瞬时频率估计方法研究[J]. 兵工学报, 2017, 38(9): 1806-1814.
[15]	刘海鸥，张文胜，徐宜，赵梓烨. 基于核密度估计的履带车辆传动轴载荷谱编制[J]. 兵工学报, 2017, 38(9): 1830-1838.

微小型起爆序列初步设计与性能研究

Study of Design and Performance of Micro Initiation Train

PDF

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 15

编辑推荐

Metrics

本文评价