超声辅助磨削陶瓷材料的裂纹产生与扩展仿真研究

doi:10.3969/j.issn.1000-1093.2016.05.017

兵工学报 ›› 2016, Vol. 37 ›› Issue (5): 895-902.doi: 10.3969/j.issn.1000-1093.2016.05.017

超声辅助磨削陶瓷材料的裂纹产生与扩展仿真研究

梁志强¹，田梦¹，王秋燕¹，王西彬¹，周天丰¹，吴勇波²，焦黎¹

（1.北京理工大学先进加工技术国防重点学科实验室, 北京 100081；2.秋田县立大学系统科学技术学部, 秋田 015-0055, 日本)

收稿日期:2015-11-21 修回日期:2015-11-21 上线日期:2016-07-06
作者简介:梁志强（1984—），男，副教授，硕士生导师
基金资助:
国家自然科学基金项目(51205024)；国家重点基础研究计划项目(2015CB05990)

Simulation Investigation on Crack Initiation and Propagation in Ultrasonic Assisted Grinding of Ceramics Material

LIANG Zhi-qiang¹， TIAN Meng¹， WANG Qiu-yan¹， WANG Xi-bin¹，

(1.Key Laboratory of Fundamental Science for Advanced Machining, Beijing Institute of Technology, Beijing 100081, China;2.Department of Systems Science and Technology, Akita Prefectural University, Akita 015-0055, Japan)

Received:2015-11-21 Revised:2015-11-21 Online:2016-07-06

摘要/Abstract

摘要： 基于光滑质点流体动力学(SPH)法，研究超声磨削陶瓷材料过程中磨粒冲击工件的裂纹产生及扩展情况，揭示不同超声冲击速度下材料的去除特性及表面层损伤规律。仿真结果表明：磨粒以不同速度压入工件一定深度后，工件开始产生侧向裂纹和径向裂纹；随着冲击速度的增大，工件材料受冲击部位周围的局部崩碎现象明显减少，产生侧向裂纹时磨粒压入工件的临界深度减小，而产生径向裂纹时的临界深度无明显变化。磨粒压入工件的深度增加，观察两种裂纹的扩展情况发现：冲击速度提高，侧向裂纹扩展速度变慢、尺寸减小，而径向裂纹则无明显变化。证实了随着冲击速度的提高，即超声效果加强时，工件的塑性域去除范围增大，但不会引起表面层损伤增大，最终表面质量得到提高。

关键词: 机械制造工艺与设备, 超声辅助磨削, 裂纹产生及扩展, 光滑质点流体动力学法

Abstract: Based on smoothed particle hydrodynamics (SPH) method, the initiation and propagation of the cracks in the process of single abrasive impacting a workpiece are simulated during ultrasonic assisted grinding of ceramics material, and the removal characteristics and surface layer damage of material under different ultrasonic impact speeds are revealed. The simulation results show that the lateral and radial cracks occur initially when single abrasive is pressed into the workpiece at a certain depth under different impact speeds. With the increase in impact speed, the fractures in action area are significantly reduced, and the critical pressed depth of abrasive is decreased when a lateral crack is generated, while the critical pressed depth of abrasive is unchanged obviously when a radial crack is generated. By observing the propagation of the two kinds of crack with the increase in the pressed depth, it can be found that the propagation velocity and geometric size of lateral crack decrease, while the radial crack has no obvious change. The results show that the ductile region removal of ceramics material is enhanced with the increase in impact speed, while the damage of surface layer is not enlarged, and the surface quality is improved.

Key words: manufacturing technology and equipment, ultrasonic assisted grinding, crack initiation and propagation, smoothed particle hydrodynamics method

中图分类号:

TG580.1

梁志强，田梦，王秋燕，王西彬，周天丰，吴勇波，焦黎. 超声辅助磨削陶瓷材料的裂纹产生与扩展仿真研究[J]. 兵工学报, 2016, 37(5): 895-902.

LIANG Zhi-qiang， TIAN Meng， WANG Qiu-yan， WANG Xi-bin，. Simulation Investigation on Crack Initiation and Propagation in Ultrasonic Assisted Grinding of Ceramics Material[J]. Acta Armamentarii, 2016, 37(5): 895-902.

参考文献

［1］ Ishihara M, Baba S, Takahashi T, et al. Fundamental thermo mechanical properties of SiC-based structural ceramics subjected to high energy particle irradiations[J]. Fusion Engineering and Design, 2000, 51: 117-121.
[2］陈维平, 韩孟岩, 杨少锋. Al₂O₃陶瓷复合材料的研究进展[J]. 材料工程, 2011, 21(3): 91-96.
CHEN Wei-ping, HAN Meng-yan, YANG Shao-feng. Research progress of Al₂O₃ ceramic composites[J]. Journal of Materials Engineering, 2011, 21(3): 91-96. (in Chinese)
[3］ Saito T, Kawamoto H, Yamamoto T, et al. Lattice strain and dislocations in polished surfaces on sapphire[J]. Journal of the American Ceramic Society, 2005, 88(8): 2277-2285.
[4］ Liang Z, Wu Y, Wang X, et al. A new two-dimensional ultrasonic assisted grinding (2D-UAG) method and its fundamental performance in monocrystal silicon machining[J]. International Journal of Machine Tools and Manufacture, 2010, 50(8): 728-736.
[5］ Tawakoli T, Azarhoushang B, Mohammad R. Ultrasonic assisted dry grinding of 42CrMo4[J]. The International Journal of Advanced Manufacturing Technology, 2009, 42(9/10): 883-891.
[6］ Uhlmann E, Spur G. Surface formation in creep feed grinding of advanced ceramics with and without ultrasonic assistance[J]. CIRP Annals-Manufacturing Technology, 1998, 47(1): 249-252.
[7］米召阳, 梁志强, 王西彬, 等. 基于光滑粒子流体动力学法单颗磨粒超声辅助磨削陶瓷材料的磨削力仿真研究[J]. 兵工学报, 2015, 36(6): 1067-1073.
MI Zhao-yang, LIANG Zhi-qiang, WANG Xi-bin, et al. A simulation investigation on grinding forces in ultrasonic assisted grinding of ceramics with single abrasive grain by using SPH method[J]. Acta Armamentarii, 2015, 36(6): 1067-1073. (in Chinese)
[8］樊俊铃, 郭杏林. 弹塑性疲劳裂纹扩展行为的数值模拟[J].机械工程学报, 2015, 51(10): 33-40.
FAN Jun-ling, GUO Xing-lin. Numerical simulation on elastic-plastic fatigue crack growth behavior[J]. Journal of Mechanical Engineering, 2015, 51(10): 33-40.(in Chinese)
[9］徐世龙, 林建忠, 杨玉廷. 基于SPH方法的磨削机理仿真研究[J].制造技术与机床, 2012(12): 136-139.
XU Shi-long, LIN Jian-zhong, YANG Yu-ting. Simulation study of grinding mechanism based on SPH[J]. Manufacturing Technology & Machine Tool, 2012(12): 136-139. (in Chinese)
[10］ Lucy L. A numerical approach to the testing of the fission hypothesis[J]. Astronomical Journal, 1977, 82(12): 1013-1024.
[11］ Gingold R, Monaghan J. Smoothed particle hydrodynamics：theory and application to non-spherical stars[J]. Monthly Notices of the Royal Astronomical Society, 1977, 181(3): 375-389.
[12］ Monaghan J. An introduction to SPH[J]. Computer Physics Communications, 1988, 48(1): 89-96.
[13］ Ruttimann N, Buhl S, Wegener K. Simulation of single grain cutting using SPH method[J]. Journal of Machine Engineering, 2010, 10(3): 17-29．
[14］ Wang J, Shimada K, Mizutani M, et al. Material removal during ultrasonic machining using smoothed particle hydrodynamics[J]. International Journal of Automation Technology, 2013, 7(6): 614-620.
[15］龚江宏. 陶瓷材料断裂力学[M]. 北京：清华大学出版社, 2001.
GONG Jiang-hong. Fracture mechanics of ceramics[M]. Beijing:Tsinghua University Press, 2001. (in Chinese)
[16］ Cronin D, Bui K, Kaufmann C, et al. Implementation and validation of the Johnson-Holmquist ceramic material model in LS-Dyna[C]∥4th European LS-DYNA Users Conference. Ulm, Germany: ARUP,2003.
[17］ Liang Z, Wang X, Wu Y, et al. Experimental study on brittle-ductile transition in elliptical ultrasonic assisted grinding (EUAG) of monocrystal sapphire using single diamond abrasive grain[J]. International Journal of Machine Tools and Manufacture, 2013, 71(8): 41-51.

[1]	辛彬，李淑娟，李玉玺. 单晶硅电火花成形加工试验研究与工艺参数优化[J]. 兵工学报, 2017, 38(9): 1854-1861.
[2]	何泽地，田东宁，杨金川，姚智慧. 薄壁球壳真空吸附装夹变形力学分析与控制[J]. 兵工学报, 2017, 38(7): 1409-1415.
[3]	郑建新，刘威成，段玉涛. 7075铝合金二维超声挤压加工表面质量影响因素及其交互作用研究[J]. 兵工学报, 2017, 38(6): 1231-1238.
[4]	陈实现，刘双宇，张宏，李彦清，刘凤德. 激光-电弧复合焊等离子体特性与焊缝熔深相关性研究[J]. 兵工学报, 2017, 38(5): 978-985.
[5]	赵建社，周学德，周旭娇，汪文峰. 带冠整体叶轮电火花加工电极及其运动轨迹同步设计方法[J]. 兵工学报, 2017, 38(4): 744-749.
[6]	李强，谢里阳，李海洋，张芳敏，宋佳昕. 基于模糊综合层次评判法的精密齿轮制造工艺优化优先度分析[J]. 兵工学报, 2017, 38(4): 750-757.
[7]	林涛, 杨炜, 王健. 基于快速抛光技术的光学元件材料去除模型研究[J]. 兵工学报, 2017, 38(3): 527-533.
[8]	杨臻，张平，蔡志海，秦航. 高强钢激光-电弧复合焊接接头力学性能研究[J]. 兵工学报, 2017, 38(3): 549-554.
[9]	陆益敏，黄国俊，郭延龙，丁方正，陈霞，韦尚方，米朝伟. 激光沉积大面积均匀类金刚石膜的设计改进及实验[J]. 兵工学报, 2017, 38(3): 555-560.
[10]	崔凤奎，凌远非，薛进学，李玉玺，李言，解克各. 花键冷滚打成形表层加工硬化研究[J]. 兵工学报, 2017, 38(2): 358-366.
[11]	张国华，李咚咚，李茂伟，张德远. 超声椭圆振动车削三维形貌形成研究[J]. 兵工学报, 2017, 38(10): 2002-2009.
[12]	李俊烨，卫丽丽，张心明，乔泽民. 介观尺度下磨粒流抛光温度对发动机喷油嘴质量影响研究[J]. 兵工学报, 2017, 38(10): 2010-2018.
[13]	张发平，吴迪，张体广，张凌雲，杨吉彬. 基于盲源信号分离的加工误差分离方法研究[J]. 兵工学报, 2016, 37(9): 1692-1699.
[14]	秦国华，孙烁，王华敏，左敦稳，吴铁军，鲁宇明. 基于工件稳定性的全区域夹紧力变向迭代规划算法[J]. 兵工学报, 2016, 37(9): 1700-1707.
[15]	巩亚东，孙瑶，刘寅. 低速单向走丝电火花线切割钛合金TC4表面粗糙度试验研究与建模[J]. 兵工学报, 2016, 37(6): 1058-1065.

超声辅助磨削陶瓷材料的裂纹产生与扩展仿真研究

Simulation Investigation on Crack Initiation and Propagation in Ultrasonic Assisted Grinding of Ceramics Material

PDF

可视化

被引次数

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 15

编辑推荐

Metrics

本文评价