电控单体泵控制阀开启过程的受力分析

doi:10.3969/j.issn.1000-1093.2013.11.007

兵工学报 ›› 2013, Vol. 34 ›› Issue (11): 1387-1391.doi: 10.3969/j.issn.1000-1093.2013.11.007

电控单体泵控制阀开启过程的受力分析

仇滔, 彭璟, 雷艳, 李彬, 李旭初

（北京工业大学环境与能源工程学院，北京 100124）

收稿日期:2012-10-17 修回日期:2012-10-17 上线日期:2014-01-22
作者简介:仇滔(1976—)，男，副教授。
基金资助:
国家自然科学基金项目（51006012）；天津大学内燃机燃烧学国家重点实验室开放课题项目(SKLE K2012-01)

Analysis of Force on Control Valve in Electronic Unit Pump

QIU Tao, PENG Jing, LEI Yan, LI Bin, LI Xu-chu

(College of Energy and Environmental Engineering, Beijing University of Technology, Beijing 100124, China)

Received:2012-10-17 Revised:2012-10-17 Online:2014-01-22

摘要/Abstract

摘要： 利用试验与仿真相结合的方法，研究分析了柴油机电控单体泵(EUP)燃油系统控制阀开启过程的受力特性。通过测量控制阀开启过程的位移获得了阀芯的受力情况；结合试验测得的进出口压力，利用计算流体动力学（CFD）方法对其流场进行了数值模拟。研究结果表明：阀开启过程末尾控制阀受到的合力方向指向闭阀方向，而燃油流动对阀芯的受力影响主要表现为液动力和静压力，其中液动力作用显著，且二者均阻碍阀打开；控制阀受力分析和结构优化必须充分考虑该区域流场的影响。

关键词: 动力机械工程, 电控单体泵, 控制阀, 液动力, 开启过程

Abstract: By means of experiment and simulation method, the force characteristic of the control valve in the electronic unit pump (EUP) is studied. The resultant force on the valve is obtained based on its displacement data acquired through test. The flow field is simulated with the computational fluid dynamics (CFD) method. The transient inlet and outlet pressure measured are adopted as the boundary of the CFD simulation. The experiment results show that the resultant force’s direction is consistent with that of the valve closing at the end of valve opening, the flow influence on the valve mainly reflects in the static pressure and flow force, especially in the flow force, and they both prevent the valve from opening. The flow characteristic around the valve must be fully taken into consideration for force analysis and structure optimization of the control valve.

Key words: power mechanical engineering, electronic unit pump, control valve, flow force, opening process

中图分类号:

TK421.4

仇滔, 彭璟, 雷艳, 李彬, 李旭初. 电控单体泵控制阀开启过程的受力分析[J]. 兵工学报, 2013, 34(11): 1387-1391.

QIU Tao, PENG Jing, LEI Yan, LI Bin, LI Xu-chu. Analysis of Force on Control Valve in Electronic Unit Pump[J]. Acta Armamentarii, 2013, 34(11): 1387-1391.

参考文献

［1］ Arcoumanis C, Gavaises M, Flora H, et al. Visualisation of cavitation in diesel engine injectors[J]. Mécanique & Industries, 2001, 2(5): 375-381. ［2］ Suh H K, Lee C S. Effect of cavitation in nozzle orifice on the diesel fuel atomization characteristics[J]. International Journal of Heat and Fluid Flow, 2008, 29(4): 1001-1009. ［3］汪翔苏万华.柴油高压喷嘴内部的压力波动与不稳定空化现象分析[J].内燃机学报,2010,28(3):193-198. WANG Xiang, SU Wan-hua. Analysis on pressure fluctuation and unsteady cavitation inside high-pressure diesel injection nozzles[J]. Transactions of CSICE, 2010,28(3):193-198. (in Chinese) ［4］ Hsieh T, Coldren D. Application of computational fluid dynamics for flow force optimization of a high pressure fuel injector spill valve[C]∥International Fuels & Lubricants Meeting & Exposition. Illinois: Caterpillar InC, 1999: 1999-01-1537. ［5］高红,傅新,杨华勇, 等.锥阀阀口气穴流场的数值模拟与试验研究[J].机械工程学报, 2002，38(8):27-30. GAO Hong, FU Xin, YANG Hua-yong, et al. Numerical and experimental investigation of cavitation flow within hydraulic poppet valve [J]. Chinese Journal of Mechanical Engineering, 2002，38(8):27-30. (in Chinese) ［6］ Shi X, Chen J. Numerical simulation based on CFD for the movement field of the hydraulic poppet valve[J]. Advanced Materials Research, 2012, 466: 1266-1270. ［7］ Amirante R, Vescovo G D, Lippolis A. Flow forces analysis of an open center hydraulic directional control valve sliding spool[J]. Energy Conversion and Management, 2006, 47(1): 114-131. ［8］ Li M H, Jiang F. Effects on locomotive diesel engine performance by selecting solenoid valve parameters[J]. Key Engineering Materials, 2011, 467(3): 140-145. ［9］曹秉刚,史维祥,中野和夫.内流式锥阀液动力的理论探讨[J].西安交通大学学报,1995,29(7):1-6. CAO Bin-gang, SHI Wei-xiang, Kazou Nakano. Theoretical approach on the flow force of a converged flow poppet valve[J]. Journal of Xi’an Jiaotong University,1995,29(7):1-6. (in Chinese) ［10］张宪, 裴翔, 吕梅蕾, 等. 2D 数字阀阀芯受力分析及研究[J]. 流体传动与控制, 2011,(6): 16-18. ZHANG Xian, PEI Xiang, LV Mei-lei, et al. Research and analysis of forces on 2D digital valve spool[J]. Fluid Power Transmission and Control, 2011,(6):16-18. (in Chinese)

[1]	索文超，许翔，耿飞. 基于计算流体力学的车辆发动机散热器芯部外形优化[J]. 兵工学报, 2017, 38(9): 1839-1844.
[2]	王英敏，崔涛，张付军，董天普. 基于局部线性模型树模型的柴油机进气系统漏气和堵塞故障诊断[J]. 兵工学报, 2017, 38(8): 1457-1468.
[3]	叶莹，赵振峰，符代桥, 张付军. 对置活塞轴向发动机同步运动机构空间圆柱凸轮的设计与优化[J]. 兵工学报, 2017, 38(5): 852-858.
[4]	岳广照，刘兴华，仇滔. 柴油机选择性催化还原系统氨泄漏及控制研究[J]. 兵工学报, 2017, 38(4): 634-642.
[5]	王增全，王正，兰银在，陈泽忠，侯新荣. 某型车用柴油机机体缝合螺栓的可靠性增长研究[J]. 兵工学报, 2017, 38(3): 433-439.
[6]	王宪成，赵文柱，和穆，杨绍卿，徐冬冬. 柴油机喷油器喷孔积碳对喷雾影响研究[J]. 兵工学报, 2017, 38(2): 218-226.
[7]	刘胜吉，赵宇超，刘荣利，王建，孙永福. 基于排放特性的小型风冷柴油机燃烧过程研究[J]. 兵工学报, 2017, 38(12): 2480-2487.
[8]	刘宇航，赵振峰，张付军，谢钊毅, 鲁怡，崔华盛. 对置活塞二冲程柴油机双喷油器碰撞喷雾试验研究[J]. 兵工学报, 2017, 38(10): 1881-1890.
[9]	仇滔，刘天翔，安晓东，雷艳，代贺飞. 高压共轨喷油器针阀开启与关闭过程规律研究[J]. 兵工学报, 2017, 38(10): 2069-2074.
[10]	商海昆，董长龙，何剑丰，樊丰，李萍，黄绵敦，谢亮. 二级增压柴油机压缩比和喷油提前角优化研究[J]. 兵工学报, 2017, 38(1): 20-26.
[11]	延皓，康硕，王凤聚，李长春，黄静. 偏转板射流式伺服阀前置级液动力计算方法研究[J]. 兵工学报, 2016, 37(7): 1258-1265.
[12]	张栓录，赵长禄，钟科，赵振峰. 液压自由活塞柴油机的做功影响因素分析[J]. 兵工学报, 2016, 37(3): 394-399.
[13]	穆洪斌，魏巍，闫清东，刘城. 双循环圆液力缓速器叶片顶弧优化设计[J]. 兵工学报, 2016, 37(3): 400-407.
[14]	纪常伟，冯雨，汪硕峰，张擘，徐溥言，余梦辉. 添加剂对车载制氢机制氢效率影响的实验研究[J]. 兵工学报, 2016, 37(3): 570-576.
[15]	仇滔, 徐慧, 雷艳. 柴油机喷孔内空化过程及影响参数的试验研究[J]. 兵工学报, 2016, 37(11): 2114-2119.

电控单体泵控制阀开启过程的受力分析

Analysis of Force on Control Valve in Electronic Unit Pump

PDF

可视化

被引次数

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 15

编辑推荐

Metrics

本文评价