1Cr18Ni9Ti 管材拉伸断裂过程中裂纹扩展的研究

doi:10.3969/j.issn.1000-1093.2013.07.011

兵工学报 ›› 2013, Vol. 34 ›› Issue (7): 865-868.doi: 10.3969/j.issn.1000-1093.2013.07.011

1Cr18Ni9Ti 管材拉伸断裂过程中裂纹扩展的研究

陈吉生, 鄂大辛, 张敬文

北京理工大学材料学院, 北京100081

收稿日期:2012-10-07 修回日期:2012-10-07 上线日期:2014-08-19
作者简介:陈吉生(1988—), 男, 硕士。
基金资助:
国家自然科学基金项目(51175044)

Research on Crack Propagation in the Crack Process of 1Cr18Ni9Ti Tube Under Uniaxial Tension

CHEN Ji-sheng, E Da-xin, ZHANG Jing-wen

School of Materials Science and Engineering, Beijing Institute of Technology, Beijing 100081, China

Received:2012-10-07 Revised:2012-10-07 Online:2014-08-19

摘要/Abstract

摘要： 在管材弯曲成形系列研究的基础上,尝试采用单向拉伸试验获取了1Cr18Ni9Ti 管形状态下材料的真实力学性能参数,推导出仅测试管外径即可计算得出均匀变形任意时刻真实拉伸应力的近似公式,得出裂纹扩展规律并结合有限元分析了颈缩过程中的应力应变分布。结果表明:颈缩过程中,内、外侧壁应力状态存在一定差异,裂纹最先产生在内侧壁附近,并最后扩展至外侧壁;同时,最大轴向应力因外侧壁发生一定卸载而产生在靠近内侧壁某一区域,最大轴向应变产生在最后破裂的外侧壁处。

关键词: 固体力学, 管材拉伸, 裂纹扩展, 应力应变

Abstract: Based on a series of explorations on tube bending, the true mechanical property parameters of 1Cr18Ni9Ti tube are obtained through uniaxial tensile test. An approximate equation of true tensile stress at any moment in the uniform deformation process is derived and the corresponding result could be obtained by merely measuring the outer diameter of tube. Crack propagation law and stress-strain distribution in the necking process are discussed by experiment and simulation. The result shows that there exists a discrepancy in the stress states in the inner and outer tube walls during necking. Crack occurs first in the area which is close to the inner tube wall and subsequently propagates to the outer tube wall. In the meanwhile, the maximum axial stress energes in an area close to the inner tube wall due to unloading in the outer tube wall and the maximum axial strain yields in the outer tube wall where the crack occurs last.

Key words: solid mechanics, tube tension, crack propagation, stress-strain

中图分类号:

TG142.1

陈吉生, 鄂大辛, 张敬文. 1Cr18Ni9Ti 管材拉伸断裂过程中裂纹扩展的研究[J]. 兵工学报, 2013, 34(7): 865-868.

CHEN Ji-sheng, E Da-xin, ZHANG Jing-wen. Research on Crack Propagation in the Crack Process of 1Cr18Ni9Ti Tube Under Uniaxial Tension[J]. Acta Armamentarii, 2013, 34(7): 865-868.

参考文献

[1] Jiao H, Zhao X L. Material ductility of very high strength (VHS) circular steel tubes in tension [J]. Thin-walled Structures, 2001,39(11): 887-906.

[2] Garcia-Carino C, Gabaldon F. Finite element simulation of the simple tension test in metals [J]. Finite Elements in Analysis and Design, 2006, 42(13):1187-1197.

[3] Costa Mattos H S, Chimisso F E G. Necking of elasto-plastic rods under tension [J]. International Journal of Non-linear Mechanics,1997, 32(6): 1077-1086.

[4] Shahbeyk S, Rahiminejad D, Petrinic N. Local solution of the stress and strain fields in the necking section of cylindrical bars under uniaxial tension [J]. European Journal of Mechanics-A/ Sol-ids, 2010, 29(2): 230-241.

[5] Bui Q H, Bihamta R. Investigation of the formability limit of aluminium tubes drawn with variable wall thickness [J]. Journal of Materials Processing Technology, 2011, 211(3): 402-414.

[6] 晏小兵,徐哲,王练, 等. TA15 钛合金管材温拉伸工艺研究[J]. 有色金属加工,2011, 40(6): 36-37.

YAN Xiao-bing, XU Zhe, WANG Lian, et al. Study on warm drawling process of TA15 tltanlum alloy tube[J]. Nonferrous Metals Processing,2011,40(6):36-37. (in Chinese)

[7] 闫晶, 杨合, 詹梅,等. 一种确定管材本构参数的新方法及其应用[J]. 材料科学与工艺, 2009, 17(3): 297-300.

YAN Jing, YANG He, ZHAN Mei, et al. Effect of tube plastic constitutive parameters on plastic deformation behaviors in NC tube bending[J]. Material Science and Technology, 2009, 17(3):297-300. (in Chinese)

[8] 刘娟,鄂大辛,张敬文. 小直径薄壁管直接拉伸方法研究[J].实验技术与管理, 2012, 29(3) :56-58.

LIU Juan, E Da-xin, ZHANG Jing-wen. Study on tensile method of thin-walled tube with small diameter[J]. Experimental Technology and Management, 2012, 29(3) :56-58. (in Chinese)

[9] E D X, He H H, Liu X Y, et al. Spring-back deformation in tube bending [J]. International Journal of Minerals, Metallurgy, and Materials, 2009, 16(2): 177-183.

[10] E D X, Liu Y F. Springback and time-dependent springback of 1Cr18Ni9Ti stainless steel tubes under bending [J]. Materials and Design, 2010, 31(3): 1256-1261.

[11] E D X, Chen J S, Ding J, et al. In-plane strain solution of stress and defects of tube bending with exponential hardening law [J].Mechanics Based Design of Structures and Machines, 2012, 40(3): 257-276.

[1]	杨硕, 杜天玮, 张晓鹏, 马梁, 张桂昌. 外物损伤对叶片振动疲劳裂纹扩展性能的影响[J]. 兵工学报, 2023, 44(6): 1713-1721.
[2]	张轶凡, 刘亮涛, 王金相, 李恒, 唐奎. 水下爆炸冲击波和气泡载荷对典型圆柱壳结构的毁伤特性[J]. 兵工学报, 2023, 44(2): 345-359.
[3]	高峰，张泽. 含装药缺陷的固体火箭发动机性能评估综述[J]. 兵工学报, 2021, 42(8): 1789-1802.
[4]	段春争，刘玉敏，孙伟，车明帆. 增强颗粒对切削SiCp/Al复合材料切屑形成过程的影响机理[J]. 兵工学报, 2019, 40(1): 208-218.
[5]	张晓颖，李胜杰，李志强. 爆炸载荷作用下夹层玻璃动态响应的数值模拟[J]. 兵工学报, 2018, 39(7): 1379-1388.
[6]	王宗炼，任会兰，宁建国. 基于小波变换的混凝土压缩损伤模式识别[J]. 兵工学报, 2017, 38(9): 1745-1753.
[7]	袁康博，郭伟国. 高g值加速度计动态线性度标定方法研究[J]. 兵工学报, 2017, 38(12): 2429-2437.
[8]	周刚毅，董新龙，付应乾. 动态帽型剪切试样分析及实验验证[J]. 兵工学报, 2017, 38(12): 2455-2462.
[9]	李志斌，卢芳云. 梯度温度场中多胞材料牺牲层的抗冲击分析[J]. 兵工学报, 2017, 38(12): 2463-2471.
[10]	冯晓伟, 李俊承, 常敬臻, 王洪波, 胡文军. 氧化铝陶瓷受冲击压缩破坏的细观机理研究[J]. 兵工学报, 2017, 38(12): 2472-2479.
[11]	刘志芳，王军，秦庆华. 横向冲击载荷下泡沫铝夹芯双圆管的吸能研究[J]. 兵工学报, 2017, 38(11): 2259-2267.
[12]	章伊华，庞奎，林丹益，麦云飞，孙晓萌，杨国玉. 基于接触面特征的螺栓联接刚度研究[J]. 兵工学报, 2017, 38(1): 195-201.
[13]	周金宇，谢里阳，朱福先，韩文钦. 疲劳裂纹形核寿命的细观概率模型[J]. 兵工学报, 2016, 37(2): 307-316.
[14]	苗润，王伟力，宋杨. TC4钛合金动态II型裂纹扩展速度与加载速度的关系研究[J]. 兵工学报, 2016, 37(12): 2331-2339.
[15]	陈攀，漆琼芳. 基于行波法的有限加肋板耦合运动研究[J]. 兵工学报, 2016, 37(11): 2128-2135.

1Cr18Ni9Ti 管材拉伸断裂过程中裂纹扩展的研究

Research on Crack Propagation in the Crack Process of 1Cr18Ni9Ti Tube Under Uniaxial Tension

PDF

可视化

被引次数

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 15

编辑推荐

Metrics

本文评价