[1] DE Technologies,Inc.Reactive material enhanced warheads[EB/OL].(2006-05-15)[2021-06-15].http:∥detk.com/recent-projests/reactive-material-enhanced-warheads/. [2] WANG H F,ZHENG Y F,YU Q B,et al. Impact-induced initiation and energy release behavior of reactive materials[J]. Journal of Applied Physics,2011,110:074904. [3] AMES R G. Energy release characteristics of impact-initiated energetic materials[C]∥Proceedings of Materials Research Society Symposium. Boston,MA,US: Materials Research Society,2006:78-83. [4] WANG H F,GENG B Q,GUO H G,et al. The effect of sintering and cooling process on geometry distortion and mechanical properties transition of PTFE/Al reactive materials[J]. Defence Technology,2020,16(3):720-730. [5] WANG L,LIU J X,LI S K,et al. Investigation on reaction energy,mechanical behavior and impact insensitivity of W-PTFE-Al composites with different W percentage[J]. Materials and Design,2016,92:397-404. [6] CHARLET K,SAULNIER F,DUBOIS M,et al. Improvement of wood polymer composite mechanical properties by direct fluorination[J].Material and Design,2015,74:61-66. [7] TANG L,WANG H F,LU G C,et al.Mesoscale study on the shock response and initiation behavior of Al-PTFE granular composites[J].Materials and Design,2021,200:109446. [8] 王海福,刘宗伟,俞为民,等.活性破片能量输出特性实验研究[J].北京理工大学学报,2009,29(8):663-666. WANG H F,LIU Z W,YU W M,et al. Experimental investigation of energy release characteristics of reactive fragments[J].Transactions of Beijing Institute of Technology,2009,29(8):663-666. (in Chinese) [9] GE C,YU Q B,ZHANG H,et al.On dynamic response and fracture-induced initiation characteristics of aluminum particle filled PTFE reactive material using hat-shaped specimens[J].Materials and Design,2020,188:108472. [10] XU F Y,ZHENG Y F,YU Q B,et al.Experimental study on penetration behavior of reactive material projectile impacting aluminum plate[J].International Journal of Impact Engineering,2016,95:125-132. [11] YU Q B,ZHANG J H,ZHAO H W,et al.Behind-plate overpressure effect of steel-encased reactive material projectile impacting thin aluminum plate[J]. Defence Technology,2022,18(5):723-734. [12] XU F Y,YU Q B,ZHENG Y F,et al. Damage effects of double-spaced aluminum plates by reactive material projectile impact[J].International Journal of Impact Engineering,2017,104:13-20. [13] 王海福,郑元枫,余庆波,等.活性破片引燃航空煤油实验研究[J].兵工学报,2012,33(9):1148-1152. WANG H F,ZHENG Y F,YU Q B,et al. Experimental Research on Igniting the Aviation Kerosene by Reactive Fragment[J]. Acta Armamentarii,2012,33(9):1148-1152. (in Chinese) [14] LIU S B,YUAN Y,ZHENG Y F,et al. Enhanced ignition behavior of reactive material projectiles impacting fuel-filled tank[J].Defence Technology,2019,15(3):533-540. [15] WANG H F,XIE J W,GE C,et al.Experimental investigation on enhanced damage to fuel tanks by reactive projectiles impact[J]. Defence Technology,2021,17(2):599-608. [16] 王成龙,黄广炎,冯顺山.反应破片对密实防护油箱的引燃效应研究[J].兵工学报,2018,39(增刊1):23-28. WANG C L,HUANG G Y,FENG S S. Research on Ignition of Aircraft Fuel Tank by Reactive Fragment[J].Acta Armamentarii,2018,39(S1):23-28. (in Chinese) [17] LEE M,LONGORIA R G,WILSON D E. Cavity dynamics in high-speed water entry[J]. Physics of Fluids,1997,9:540. [18] GUO Z T,ZHANG W,WANG C. Experimental and theoretical study on the high-speed horizontal water entry behaviors of cylindrical projectiles[J]. Journal of Hydrodynamics, 2012,24(2): 217-225. [19] BIRKHOFF G,ZARANTONELLO F H. Jets,wakes,and cavities[M]. New York,NY,US: Academic Press,1957. [20] XU F Y,GENG B Q,ZHANG X P,et al. Experimental study on behind-plate overpressure effect by reactive material projectile[J]. Propellants Explosives Pyrotechnics,2017,42:192-197. [21] 丁祖荣.流体力学[M].第2版.北京:高等教育出版社,2013:113-118. DING Z R. Fluid mechanics[M].2nd ed.Beijing:Higher Education Press,2013:113-118. (in Chinese)