Reliability Analysis of Aircraft Fuel Closed-loop Control System Based on GO Methodology and Markov Process
LI Jingkui1, LIN Wenjie1, JIANG Xiuhong2, LU Yuze1
(1.Civil Aviation College,Shenyang Aerospace University,Shenyang 110136,Liaoning,China;2.School of Electronic and Information Engineering,Shenyang Aerospace University,Shenyang 110136,Liaoning,China)
LI Jingkui, LIN Wenjie, JIANG Xiuhong, LU Yuze. Reliability Analysis of Aircraft Fuel Closed-loop Control System Based on GO Methodology and Markov Process[J]. Acta Armamentarii, 2022, 43(6): 1447-1455.
[1] 方来华,吴宗之,刘骥,等.基于可靠性框图法的安全功能失效概率定量分析[J].化工自动化及仪表,2008,35(2):32-35. FANG L H,WU Z Z,LIU J,et al.Quantitative analysis for probability of safety function failure based on reliability block diagram[J].Control and Instruments in Chemical Industry,2008(2): 32-35. (in Chinese) [2] 卞 瑞兵,张扬,潘正强,等.基于二元决策图的护航编队多阶段任务体系可靠性分析[J].兵工学报,2020,41(5): 1016-1024. BIAN R B,ZHANG Y,PAN Z Q,et al.Reliability analysis of phased-mission system of systems for escort formation based on BDD[J].Acta Armamentarii,2020,41(5):1016-1024. (in Chinese) [3] LIU L L,FAN D M,WANG Z L,et al. Enhanced GO methodology to support failure mode,effects and criticality analysis[J].Journal of Intelligent Manufacturing,2019,30(3):1451-1468. [4] LEE W,GROSH D L,TILLMAN F A,et al.Fault tree analysis,methods,and applications: a review[J].IEEE Transactions on Reliability,1985,34(3):194-203. [5] RUIJTERS E,STOELINGA M. Fault tree analysis: a survey of the state-of-the-art in modeling,analysis and tools[J].Computer Science Review,2015,15/16:29-62. [6] WILLIAMS R L,GATELEY W Y. Use of the GO methodology to directly generate minimal cut sets[M].London,UK: Nuclear Systems Reliability Engineering and Risk Assessment,1977. [7] GATELY W Y,WILLIAMS R L.GO methodology-system reliability assessment and computer code manual:EPRI-NP-766[R].Washington,DC, US: Kaman Sciences Corporation,1978. [8] 尹晓伟,钱文学,谢里阳.系统可靠性的贝叶斯网络评估方法[J].航空学报,2008,29(6):1482-1489. YIN X W,QIAN W X,XIE L Y.A method for system reliability assessment based on Bayesian Networks[J].Acta Aeronautica et Astronautica Sinica,2008,29(6):1482-1489. (in Chinese) [9] 江秀红,段富海,胡爱玲.一种新型GO法操作符及其在多态系统中的应用[J].兵工学报,2019,40(4):857-864. JIANG X H,DUAN F H,HU A L.A new GO operator and its application in multi-state system[J].Acta Armamentarii,2019,40(4): 857-864. (in Chinese) [10] 马骏,段富海,王海朋.基于GO法的某型飞机液压系统可靠性研究[J].大连理工大学学报,2019,59(5):492-500. MA J,DUAN F H,WANG H P.Research on the reliability of a certain aircraft hydraulic system based on GO method[J].Journal of Dalian University of Technology,2019,59(5): 492-500. (in Chinese) [11] YI X J,SHI J,CHENG J. Reliability technology using GO methodology: a review[J].Quality and Reliability Engineering International,2019,35(8):2513-2539. [12] LI Z,YANG J W,YAO D C,et al.Reliability analysis of a metro braking control system based on fuzzy GO Method[J].International Journal of Performability Engineering,2020,16(11): 1826-1834. [13] 曹慧,段富海,江秀红.基于通用发生函数与成功流法的多态系统可靠性分析算法研究[J].兵工学报,2020,41(4):792-798. CAO H,DUAN F H,JIANG X H.Research on reliability analysis of multi-state system based on UGF and GO methodology[J].Acta Armamentarii,2020,41(4):792-798. (in Chinese) [14] SHEN Z P,WANG Y,HUANG X R.A quantification algorithm for a repairable system in the GO methodology[J].Reliability Engineering and System Safety,2003,80(3):293-298. [15] SHEN Z P,DAI X J,HUANG X R.A supplemental algorithm for the repairable system in the GO methodology [J].Reliability Engineering and System Safety,2006,91(8):940-944. [16] YI X J,SHI J,DONG H P,et al.Reliability analysis of repairable system with multiple-input and multi-function component based on goal-oriented methodology[J].ASCE-ASME Journal of Risk and Uncertainty in Engineering Systems. Part B, Mechanical Engineering,2017,3(1):014501. [17] YI X J,SHI J,DONG H P,et al. Reliability analysis of repairable system with multiple fault modes based on goal-oriented methodology[J].ASCE-ASME Journal of Risk and Uncertainty in Engineering Systems.Part B,Mechanical Engineering,2016,2(1): 011003 [18] 王雯雯,朱爱华,杨建伟.基于Bayes-GO的制动风源子系统可靠性评估[J].电工技术学报,2015,30(增刊1):501-505. WANG W W,ZHU A H,YANG J W. Reliability assessment of brake air source subsystem based on Bayes-GO[J].Transactions of China Electrotechnical Society,2015,30(S1):501-505. (in Chinese) [19] YANG J E,HAN S H,PARK J H,et al. Analytic method to break logical loops automatically in PSA[J].Reliability Engineering and System Safety,1997,56(2):101-105. [20] JUNG W S,HAN S H. Development of an analytical method to break logical loops at the system level[J].Reliability Engineering and System Safety,2005,90(1):37-44. [21] VAURIO J K.A recursive method for breaking complex logic loops in Boolean system models[J].Reliability Engineering and System Safety,2006,92(10):1473-1475. [22] MATSUOKA T.An exact method for solving logical loops in reliability analysis[J]. Reliability Engineering and System Safety,2009,94(8):1282-1288. [23] MATSUOKA T. Evaluation of plant operational states with the consideration of loop structures under accident conditions[J]. Nuclear Engineering and Technology,2015,47(2):157-164. [24] 沈祖培,黄祥瑞.GO法原理及应用:一种系统可靠性分析方法[M].北京:清华大学出版社,2004:123-130. SHEN Z P,HUANG X R. Principle and application of GO method: an analysis method of system reliability[M].Beijing:Tsinghua University Press,2004:123-130. (in Chinese) [25] LI K J,REN Y,FAN D M,et al. Enhanced GO methodology for reliability analysis of the closed-loop system using cyclic Bayesian networks[J].Mechanical Systems and Signal Processing,2018,113:237-252. [26] MA J,DUAN F H.Application of GO methodology in reliability analysis of aircraft flap hydraulic system[J].The Aeronautical Journal,2020,124(1272):257-270. [27] YI X J,SHI J,MU H N,et al. Reliability analysis on repairable system with dual input closed-loop feedback link considering shutdown correlation based on Goal Oriented Methodology[J].Journal of Donghua University (English Edition),2016,33(2):314-318. [28] YI X J,DHILLON B S,DONG H P,et al. Quantitative reliability analysis of repairable systems with closed-loop feedback based on GO methodology[J].Journal of the Brazilian Society of Mechanical Science and Engineering,2017,39(5):1845-1858. [29] YI X J,DHILLON B S,SHI J,et al.A new reliability analysis method for vehicle systems based on goal-oriented methodology[J].Proceedings of the Institution of Mechanical Engineers. Part D Journal of Automobile Engineering,2017,231(8):1066-1095. [30] YI X J,SHI J,DHILLON B S,et al.A new reliability analysis method for repairable systems with closed-loop feedback links[J].Quality and Reliability Engineering,2017,34(3):298-332. [31] MOIR I,SEABRIDGE A. Aircraft systems: mechanical,electrical, and avionics subsystems integration[M].3th ed. London, UK: John Wiley & Sons,2008. [32] 金星,洪延姬.系统可靠性与可用性分析方法[M].北京:国防工业出版社,2007:150-165. JIN X,HONG Y J.System reliability and availability analysis method[M].Beijing: National Defense Industry Press,2007:150-165. (in Chinese) [33] 赵志欣,唐慧,刘仁云.基于马尔可夫过程的风电系统可靠性分析[J].吉林大学学报(工学版),2021,51(2):697-703. ZHAO Z X,TANG H,LIU R Y. Reliability analysis of wind power generation system based on Markov process[J].Journal of Jilin University(Engineering and Technology Edition),2021,51(2): 697-703. (in Chinese)