[1] HU Y, WU C Q, MATTHEW L, et al. Characteristics of confined blast loading in unvented structures[J]. International Journal of Protect Structures, 2011, 2(1): 21-44. [2] GERETTO C, CHUNG KIM YUEN S, NURICK G N. An experimental study of the effects of degrees of confinement on the response of square mild steel plates subjected to blast loading[J]. International Journal of Impact Engineering, 2015, 79:32-44. [3] 姚术健, 张舵, 郑监,等. 内部爆炸作用下钢箱结构变形规律性实验[J]. 爆炸与冲击, 2017, 37(5): 964-968. YAO S J, ZHANG D, ZHENG J, et al. Experimental study of deformation of steel box subjected to internal blast loading[J]. Explosion and Shock Waves, 2017, 37(5):964-968. (in Chinese) [4] REMENNIKOV A M, NGO T, MOHOTTI D, et al. Experimental investigation and simplified modeling of response of steel plates subjected to close-in blast loading from spherical liquid explosive charges[J]. International Journal of Impact Engineering, 2017, 101: 78-89. [5] ZHENG C, KONG X S, WU W G, et al. Experimental and numerical studies on the dynamic response of steel plates subjected to confined blast loading[J]. International Journal of Impact Engineering, 2018, 113: 144-160. [6] CHUNG KIM YUEN S,NURICK G N,LANGDON G S, et al. Deformation of thin plates subjected to impulsive load: Part III-an update 25 years on[J]. International Journal of Impact Engineering, 2016, 107: 108-117. [7] NEUBERGERA A, PEJESC S, RITTEL D. Scaling the response of circular plates subjected to large and close-range spherical explosions. Part I: air-blast loading[J]. International Journal of Impact Engineering, 2007, 34(5): 859-873. [8] LANGDON G S, OZINSKY A, CHUNG KIM YUEN S. The response of partially confined right circular stainless steel cylinders to internal air-blast loading[J]. International Journal of Impact Engineering, 2014, 73(2): 1-14. [9] MENKES S B, OPAT H J. Broken beams: tearing and shear failures in explosively loaded clamped beams[J]. Experimental Mechanics, 1973, 13: 480-486. [10] TEELING-SMITH R G, NURICK G N. The deformation and tearing of thin circular plates subjected to impulsive loads[J]. International Journal of Impact Engineering, 1991, 11(1): 77-91. [11] NURICK G N, SHAVE G C. The deformation and tearing of thin square plates subjected to impulsive loads-an experimental study[J]. International Journal of Impact Engineering, 1996, 18(1): 99-116. [12] JACOB N, NURICK G N, LANGDON G S. The effect of stand-off distance on the failure of fully clamped circular mild steel plates subjected to blast loads[J]. Engineering Structures, 2007, 29(10): 2723-2736. [13] 孔祥韶, 周沪, 郑成,等. 基于饱和响应时间的封闭空间内爆炸载荷等效方法研究[J]. 爆炸与冲击, 2019, 39(9): 092102. KONG X S, ZHOU H, ZHENG C, et al. An equivalent calculation method for confined-blast load based on saturated response time[J]. Explosion and Shock Waves, 2019, 39(9): 092102. (in Chinese) [14] 姚术健, 张舵, 卢芳云,等. 多箱室结构内部爆炸损伤特性研究[J]. 兵工学报, 2015, 36(1): 87-91. YAO S J, ZHANG D, LU F Y, et al. Research on the damage characteristics of multi-chamber structure subjected to internal blast[J]. Acta Armamentarii, 2015, 36(1): 87-91. (in Chinese) [15] 冯海云, 胡宏伟, 赵向军,等. 一种评估炸药作功能力的新测试方法[J]. 爆破器材, 2014, 43(2): 33-36. FENG H Y, HU H W, ZHAO X J, et a1. A new test method to assess the acting ability of explosive[J]. Explosive Materials, 2014, 43(2): 33-36. (in Chinese) [16] JIAO Q J, WANG Q S, NIE J X, et al. The effect of explosive percentage on underwater explosion energy release of hexanitrohexaazaisowurtzitane and octogen based aluminized explosives[J]. AIP Advances, 2018, 8(3): 035013. [17] 刘丹阳, 陈朗, 杨坤,等. CL-20基炸药爆轰产物JWL状态方程实验标定方法研究[J]. 兵工学报, 2016, 37(1): 141-145. LIU D Y, CHEN L, YANG K, et al. Calibration method of parameters in JWL equation of state for detonation products of CL-20-based explosives[J]. Acta Armamentarii, 2016, 37(1): 141-145. (in Chinese) [18] DAVID TASSIA P E. Internal blast test to support the tomahawk and APET programs “Munitions Survivability in Unified Operations”[C]∥Insensitive Munitions & Energetic Materials Technology Symposium. San Diego, CA, US: NDIA, 1996. [19] COOK M A. Aluminized explosives[J]. Journal of Applied Physics, 1957, 1(1): 189-196. [20] 张玉磊, 李芝绒, 蒋海燕,等. 温压炸药内爆炸压力特性及威力试验研究[J]. 兵工学报, 2018, 39(7): 1333-1338. ZHANG Y L, LI Z R, JIANG H Y, et al. Experimental study of the characteristics of internal explosion pressure and power of thermobaric explosive[J]. Acta Armamentarii, 2018, 39(7): 1333-1338. (in Chinese) [21] DONG Q, LI Q M, ZHENG J Y. Interactive mechanisms between the internal blast loading and the dynamic elastic response of spherical containment vessels[J]. International Journal of Impact Engineering, 2010, 37(4): 349-358. [22] BJARNHOLT G. Effects of aluminum and lithium fluoride admixtures on metal acceleration ability of Comp B[C]∥Proceedings of the Sixth Symposium (International) on Detonation. Coronado, CA, US: Office of Naval Research, 1976. [23] 裴明敬, 田朝阳, 胡华权,等. 铝粉在温压炸药爆炸过程中的响应分析[J]. 火炸药学报, 2013, 36(4): 7-12. PEI M J, TIAN Z Y, HU H Q, et al. Response analysis of aluminum in the process of thermobaric explosive detonation[J]. Chinese Journal of Explosives & Propellants, 2013, 36(4): 7-12. (in Chinese) [24] JONES N. Structural impact[M]. Cambridge,UK: Cambridge University Press, 1989:137-139.
|