[1] 莱因斯C, 皮特尔斯M, 陈振华. 钛与钛合金[M]. 北京: 化学工业出版社, 2005:183-225. LEIINS C, PIETERS M, CHEN Z H. Titanium and titanium alloys [M]. Beijing: Chemical Industry Press, 2005: 183-225. (in Chinese)
[2] 赵永庆, 陈永楠, 张学敏, 等. 钛合金相变及热处理[M]. 长沙: 中南大学出版社, 2012:36. ZHAO Y Q, CHEN Y N, ZHANG X M, et al. Phase transformation and heat treatment of titanium alloy [M]. Changsha: Central South University Press, 2012:36. (in Chinese)
[3] MASTERON W, HURLEY C. Chemistry: principles and reactions [M]. Belmont, CA, US: Cengage Learning, 2015:138-141. [4] 吕逸帆, 张毅, 景宝全, 等. 固溶时效对TC4 ELI钛合金组织和性能的影响[J]. 中国有色金属学报, 2010, 20(增刊1): 616-619. LIU Y F,ZHANG Y, JING B Q, et al. Effect of solution treatment on microstructure and properties of TC4 ELI titanium alloy [J]. Chinese Journal of Nonferrous Metals, 2010, 20(S1): 616-619. (in Chinese) [5] 万明攀, 伍玉娇, 孙捷, 等. 固溶温度对TC4 ELI钛合金组织和性能的影响[J]. 热加工工艺, 2012, 41(20): 145-147. WAN M P, WU Y J, SUN J, et al. Effect of solution temperature on microstructure and properties of TC4 ELI titanium alloy [J]. Thermal Process Technology, 2012, 41(20): 145-147. (In Chinese) [6] SONG Y, ZHANG F S, HUANG T, et al. Study on thermal deformation behavior of TC4 ELI titanium alloy [J]. IOP Conference Series: Materials Science and Engineering, 2018, 359: 012014. [7] 王俭, 李有华, 李蒙, 等 . 轧制工艺和退火温度对TC4 ELI钛合金厚板显微组织的影响[J]. 有色金属材料与工程, 2018, 39(3):32-35, 47. WANG J, LI Y H, LI M, et al. Effects of rolling procedure and annealing temperature on microstructure of TC4 ELI titanium alloy thick-plate [J]. Nonferrous Metal Materials and Engineering, 2018, 39(3): 32-35,47. (in Chinese) [8] KHAN A S, SUH Y S, KAZMI R. Quasi-static and dynamic loading responses and constitutive modeling of titanium alloys[J]. International Journal of Plasticity, 2004, 20(12): 2233-2248. [9] 尤振平, 叶文君, 惠松骁, 等. TB10 钛合金的动态力学性能及绝热剪切分析[J]. 稀有金属, 2008, 32(6): 799-802. YOU Z P, YE W J, HUI S Y, et al.Study on dynamic mechanical properties and adiabatic shearing of TB10 titanium alloy [J]. Rare Metals, 2008, 32(6): 799-802. (in Chinese)
[10] JIANG Y H, CHEN Z Y, ZHAN C K, et al. Adiabatic shear localization in pure titanium deformed by dynamic loading: Microstructure and microtexture characteristic[J]. Materials Science and Engineering: A, 2015, 640: 436-442. [11] 刘新芹, 谭成文, 张静, 等. 应力状态对 Ti-6Al-4V 绝热剪切敏感性的影响[J]. 稀有金属材料与工程, 2008, 37(9): 1522-1525. LIU X Q, TAN C W, ZHANG J, et al.Influence of stress-state on adiabatic shear sensitivity of Ti-6Al-4V [J]. Rare Metal Materials and Engineering, 2008, 37(9): 1522-1525. (in Chinese) [12] RITTEL D, LANDAU P, VENKERT A. Dynamic recrystallization as a potential cause for adiabatic shear failure[J]. Physical Review Letters, 2008, 101(16): 165501. [13] ZHAN H Y, ZENG W D, WANG G, et al. Microstructural cha-racteristics of adiabatic shear localization in a metastable beta titanium alloy deformed at high strain rate and elevated temperatures[J]. Materials Characterization, 2015, 102: 103-113. [14] 黄斌, 任维佳, 张艳敏, 等. 魏氏组织TC17钛合金绝热剪切带(ASB)的组织与织构[J]. 稀有金属材料与工程, 2018, 47(9): 2705-2710. HUANG B, REN W J,ZHANG Y M, et al.Microstructure and texture of adiabatic shear band (ASB) in TC17 titanium alloy with Widmanstatten microstructure [J]. Rare Metal Materials and Engineering, 2018, 47(9): 2705-2710. (in Chinese) [15] 彭美旗, 程兴旺, 郑超, 等. 次生片层α相宽度对双态组织TC4钛合金动态压缩性能及其绝热剪切敏感性的影响[J]. 稀有金属材料与工程, 2017, 46(7): 1843-1849. PENG M Q, CHENG X W, ZHENG C, et al.Effects of secondary α phase width on dynamic mechanical properties and sensitivity of adiabatic shear banding in bimodal microstructures of TC4 alloy [J]. Rare Metal Materials and Engineering, 2017, 46(7): 1843-1849. (in Chinese)
[16] 谭成文, 刘新芹, 陈志永, 等. Ti-6Al-4V合金绝热剪切敏感性与临界破碎速度关系研究[J]. 稀有金属材料与工程, 2008, 37(8):1400-1402. TAN C W, LIU X Q, CHEN Z Y, et al. Study on the relationship between adiabatic shear susceptivity and critical fracture velocity for Ti-6Al-4V alloy [J]. Rare Metal Materials and Engineering, 2008, 37(8):1400-1402. (n Chinese) [17] 靳丹, 程兴旺, 郑超, 等. 片层宽度对TC21钛合金动态压缩性能及其绝热剪切敏感性的影响规律[J]. 稀有金属材料与工程, 2016, 45(11): 2953-2958. JIN D, CHENG X W, ZHENG C, et al. Effects of lamellar α thickness on dynamic mechanical properties and sensitivity to adiabatic shear banding of TC21 alloy [J]. Rare Metal Materials and Engineering, 2016, 45(11): 2953-2958.(in Chinese) [18] LEE D G, LEE Y H, LEE S, et al. Dynamic deformation beha-vior and ballistic impact properties of Ti-6Al-4V alloy having equiaxed and bimodal microstructures[J]. Metallurgical and Materials Transactions A, 2004, 35(10): 3103-3112.
第41卷 第2期2020 年2月兵工学报ACTA ARMAMENTARIIVol.41No.2Feb.2020
|