[1] BAKER E L, DANIELS A S, NG K W, et al. Barnie: a unitary demolition warhead [C]∥Proceedings of the 19th International Symposium on Ballistics. Interlaken, Switzerland: International Ballistics Society, 2001: 569-574. [2] DANIELS A S, BAKER E L, DEFISHER S E, et al. BAM: large scale unitary demolition warheads [C]∥Proceedings of the 23rd International Symposium on Ballistics. Tarragona, Spain: International Ballistics Society, 2007: 239-246. [3] 肖建光. 活性聚能侵彻体作用混凝土结构靶毁伤效应研究[D]. 北京:北京理工大学,2016. XIAO J G. Research on damage effects of multi-layered concrete targets impacted by explosively formed penetrator[D]. Beijing: Beijing Institute of Technology, 2016.(in Chinese) [4] 张雪朋. 活性射流作用钢靶侵彻爆炸联合毁伤效应研究[D]. 北京:北京理工大学,2016. ZHANG X P. Research on penetration and blast combined damage effects of reactive material jet against steel target [D]. Beijing: Beijing Institute of Technology, 2016.(in Chinese) [5] 张雪朋,肖建光,余庆波,等. 活性药型罩聚能装药破甲后效超压特性研究[J]. 兵工学报,2016,37(8):1388-1394. ZHANG X P, XIAO J G, YU Q B, et al. Armor penetration aftereffect overpressure produced by reactive material liner shaped charge [J]. Acta Armamentarii, 2016, 37(8): 1388-1394.(in Chinese) [6] 张昊,王海福,余庆波,等.活性射流侵彻钢筋混凝土靶后效超压特性[J].兵工学报,2019,40(7):1365-1372. ZHANG H,WANG H F,YU Q B,et al. Aftereffect overpressure of reactive jet perforating into reinforced concrete [J]. Acta Armamentarii,2019,40(7):1365-1372. (inChinese)
[7] WANG Y Z, YU Q B, ZHENG Y F, et al. Formation and penetration of jets by shaped charges with reactive material liners [J]. Propellants, Explosives, Pyrotechnics, 2016, 41(4):618-622. [8] 陈杰,尹建平,韩阳阳,等. 基于SPH方法的低密度粒子流成型数值仿真[J]. 含能材料,2017,25(9):756-762. CHEN J, YIN J P, HAN Y Y, et al. Numerical simulation of low density particle jets formation based on SPH method [J]. Chinese Journal of Energetic Materials, 2017, 25(9): 756-762.(in Chinese) [9] 李磊,沈兆武,李学岭,等. SPH方法在聚能装药射流三维数值
模拟中的应用[J]. 爆炸与冲击,2012,32(3):316-322. LI L, SHEN Z W, LI X L, et al. Application of SPH method to numerical simulation of shaped charge jet [J]. Explosion and Shock Wave, 2012, 32(3): 316-322.(in Chinese)
[10] 郭支明,刘谋斌. 基于SPH的射流成形机理研究[J]. 兵器材料科学与工程,2013,36(4):37-40. GUO Z M, LIU M B. Mechanism research of shaped charge jet with SPH [J]. Ordnance Material Science and Engineering, 2013, 36(4): 37-40.(in Chinese)
[11] 张谋. 横向效应增强型穿甲弹(PELE)作用机理研究[D]. 北京:北京理工大学,2010. ZHANG M.Penetration mechanism of penetrator with enhanced lateral effect (PELE) [D]. Beijing: Beijing Institute of Technology, 2010.(in Chinese) [12] JIANG J W, WANG S Y, ZHANG M. Modeling and simulation of JWL equation of state for reactive Al/PTFE mixture[J]. Journal of Beijing Institute of Technology, 2012, 21(2): 150- 156. [13] 肖艳文. 活性破片侵彻引发爆炸效应及毁伤机理研究[D]. 北京:北京理工大学,2016. XIAO Y W. Research on penetration-induced blast effect and damage mechanism of reactive material fragment [D]. Beijing: Beijing Institute of Technology, 2016.(in Chinese) [14] 牛浩浩. Ti/PTFE 含能材料力学性能及侵彻效能研究[D]. 北京:北京理工大学,2016. NIU H H. Study on the mechanical properties and penetrability of Ti/PTFE energetic materials [D]. Beijing: Beijing Institute of Technology, 2016.(in Chinese) [15] 黄正祥. 聚能装药理论与实践[M]. 北京:北京理工大学出版社,2014. HUANG Z X. Theory and practice of shaped charge [M]. Beijing: Beijing Institute of Technology Press, 2014.(in Chinese) [16] 李如江. 多孔药型罩聚能射流机理及应用研究[D]. 合肥:中国科学技术大学,2008. LI R J. Study on the jet mechanisms of shaped charge with porous liner and its applications [D]. Hefei: University of Science and Technology of China, 2008.(in Chinese)
第40卷 第12期2019 年12月兵工学报ACTA ARMAMENTARIIVol.40No.12Dec.2019
|