Research on Jet Coherency of PTFE-based Energetic Liner

doi:10.3969/j.issn.1000-1093.2019.12.006

Abstract

Abstract: The jet cohesiveness of polytetrafluoroethylene (PTFE)-based energetic liner is related to the penetration and damage effect of jet. The numerical simulation and experimental verification were carried out to study the jet forming characteristics of PTFE/Ti/W energetic liner. The results show that there is a significant difference between the jets of energetic liner and inert aluminum liner. Due to the lower sound speed of energetic liner, the detached shock wave forms in the liner collapsed by the detonation wave, and the jet is radially diverged during flight. As the density of the liner increases, the jet coherency strengthens. The energetic penetrator continuously reacts and expands during forming. The contour of penetrator gradually becomes blurred and the density decreases with time. The numerical simulation method based on the inert material model can be used accurately to simulate the jet forming in a certain time frame. When the shape change caused by the reaction of penetrator cannot be ignored, the simulated results have certain disparity with the actual results. Key

Key words: energeticliner, jetforming, soundspeed, coherency

CLC Number:

TJ410.3⁺33

LI Yan, WANG Wei, ZHANG Leilei, WANG Zaicheng, JIANG Chunlan. Research on Jet Coherency of PTFE-based Energetic Liner[J]. Acta Armamentarii, 2019, 40(12): 2433-2439.

References

［1］ BAKER E L, DANIELS A S, NG K W, et al. Barnie: a unitary demolition warhead [C]∥Proceedings of the 19th International Symposium on Ballistics. Interlaken, Switzerland: International Ballistics Society, 2001: 569-574.
[2］ DANIELS A S, BAKER E L, DEFISHER S E, et al. BAM: large scale unitary demolition warheads [C]∥Proceedings of the 23rd International Symposium on Ballistics. Tarragona, Spain: International Ballistics Society, 2007: 239-246.
[3］肖建光. 活性聚能侵彻体作用混凝土结构靶毁伤效应研究[D]. 北京：北京理工大学，2016.
XIAO J G. Research on damage effects of multi-layered concrete targets impacted by explosively formed penetrator[D]. Beijing: Beijing Institute of Technology, 2016.(in Chinese)
[4］张雪朋. 活性射流作用钢靶侵彻爆炸联合毁伤效应研究[D]. 北京：北京理工大学，2016.
ZHANG X P. Research on penetration and blast combined damage effects of reactive material jet against steel target [D]. Beijing: Beijing Institute of Technology, 2016.(in Chinese)
[5］张雪朋，肖建光，余庆波,等. 活性药型罩聚能装药破甲后效超压特性研究[J]. 兵工学报，2016，37(8)：1388-1394.
ZHANG X P, XIAO J G, YU Q B, et al. Armor penetration aftereffect overpressure produced by reactive material liner shaped charge [J]. Acta Armamentarii, 2016, 37(8): 1388-1394.(in Chinese)
［6］张昊，王海福，余庆波，等.活性射流侵彻钢筋混凝土靶后效超压特性［J］.兵工学报，2019，40(7)：1365-1372.
ZHANG H，WANG H F，YU Q B，et al. Aftereffect overpressure of reactive jet perforating into reinforced concrete ［J］. Acta Armamentarii，2019，40(7):1365-1372. (inChinese)

[7］ WANG Y Z, YU Q B, ZHENG Y F, et al. Formation and penetration of jets by shaped charges with reactive material liners [J]. Propellants, Explosives, Pyrotechnics, 2016, 41(4):618-622.
[8］陈杰，尹建平，韩阳阳,等. 基于SPH方法的低密度粒子流成型数值仿真[J]. 含能材料，2017，25(9)：756-762.
CHEN J, YIN J P, HAN Y Y, et al. Numerical simulation of low density particle jets formation based on SPH method [J]. Chinese Journal of Energetic Materials, 2017, 25(9): 756-762.(in Chinese)
[9］李磊，沈兆武，李学岭,等. SPH方法在聚能装药射流三维数值

模拟中的应用[J]. 爆炸与冲击，2012，32(3)：316-322.
LI L, SHEN Z W, LI X L, et al. Application of SPH method to numerical simulation of shaped charge jet [J]. Explosion and Shock Wave, 2012, 32(3): 316-322.(in Chinese)

[10］郭支明，刘谋斌. 基于SPH的射流成形机理研究[J]. 兵器材料科学与工程，2013，36(4)：37-40.
GUO Z M, LIU M B. Mechanism research of shaped charge jet with SPH [J]. Ordnance Material Science and Engineering, 2013, 36(4): 37-40.(in Chinese)

[11］张谋. 横向效应增强型穿甲弹（PELE）作用机理研究[D]. 北京：北京理工大学，2010.
ZHANG M.Penetration mechanism of penetrator with enhanced lateral effect (PELE) [D]. Beijing: Beijing Institute of Technology, 2010.(in Chinese)
[12］ JIANG J W, WANG S Y, ZHANG M. Modeling and simulation of JWL equation of state for reactive Al/PTFE mixture[J]. Journal of Beijing Institute of Technology, 2012, 21(2): 150- 156.
[13］肖艳文. 活性破片侵彻引发爆炸效应及毁伤机理研究[D]. 北京：北京理工大学，2016.
XIAO Y W. Research on penetration-induced blast effect and damage mechanism of reactive material fragment [D]. Beijing: Beijing Institute of Technology, 2016.(in Chinese)
[14］牛浩浩. Ti/PTFE 含能材料力学性能及侵彻效能研究[D］. 北京：北京理工大学，2016.
NIU H H. Study on the mechanical properties and penetrability of Ti/PTFE energetic materials [D]. Beijing: Beijing Institute of Technology, 2016.(in Chinese)
[15］黄正祥. 聚能装药理论与实践[M]. 北京：北京理工大学出版社，2014.
HUANG Z X. Theory and practice of shaped charge [M]. Beijing: Beijing Institute of Technology Press, 2014.(in Chinese)
[16］李如江. 多孔药型罩聚能射流机理及应用研究[D]. 合肥：中国科学技术大学，2008.
LI R J. Study on the jet mechanisms of shaped charge with porous liner and its applications [D]. Hefei: University of Science and Technology of China, 2008.(in Chinese)

第40卷
第12期2019 年12月兵工学报ACTA
ARMAMENTARIIVol.40No.12Dec.2019