A New GO Operator and Its Application in Multi-state System

doi:10.3969/j.issn.1000-1093.2019.04.021

Abstract

Abstract: Some problems in the reliability analysis process of the multi-state system(MSS) are resolved. A new GO operator called multi-state operator is put forth to improve the accuracy and flexibility of GO methodology in building a reliability model for complex MSS. The joint state probability matrix and Boolean matrix are introduced, and then the operational rule and quantitative formula of the operator are given. The system reliability models of some water supply system and inertial navigation system (INS) are established based on the multi-state operator. Reliability analysis data were obtained through simulation. The results show that the multi-state operator is not sensitive to the state dimension of the unit and the complexity of the system in the process of reliability modeling, and also can better describe the complex logical relation between input and output. Key

Key words: multi-statesystem, dynamicreliability, reliabilitymodeling, GOmethodology

CLC Number:

TB114.33

JIANG Xiuhong， DUAN Fuhai， HU Ailing. A New GO Operator and Its Application in Multi-state System[J]. Acta Armamentarii, 2019, 40(4): 857-864.

References

［1］ SERKAN E. Reliability analysis of multi-state system with three-state components and its application to wind energy[J]. Reliability Engineering and System Safety, 2018, 172: 58-63.
[2］ ZIO E. Reliability engineering: old problems and new challenges[J]. Reliability Engineering and System Safety, 2009, 94(2): 125-141.
[3］ CONTRERAS-JIMNEZ J S, RIVAS-DVALOS F, GUARDADO J L. Multi-state system reliability analysis of HVDC transmission systems using matrix-based system reliability method[J]. International Journal of Electrical Power & Energy Systems, 2018, 100: 265-278.
[4］ NGUYEN T P K, BEUGIN J, MARAIS J. Method for evaluating an extended fault tree to analyse the dependability of complex systems: application to a satellite-based railway system[J]. Reliability Engineering and System Safety, 2015, 133: 300-313.
[5］ MAJID F E, NEZAM M A. An efficient algorithm for the multi-state two separate minimal paths reliability problem with budget constraint[J]. Reliability Engineering and System Safety, 2015, 142: 472-481.
[6］ ZHAI Q Q, XING L D, PENG R, et al. Multi-valued decision diagram-based reliability analysis of k-out-of-n cold standby systems subject to scheduled backups[J]. IEEE Transactions on Reliability, 2015, 64(4): 1310-1324.
[7］李志强, 徐延学, 顾钧元, 等. 视情维修条件下的多状态控制单元可用性建模与分析[J]. 兵工学报, 2017, 38(11): 2240-2250.
LI Z Q, XU Y X, GU J Y, et al. Availability modeling and analyzing of multi-state control unit under condition-based maintenance[J]. Acta Armamentarii, 2017, 38(11): 2240-2250. (in Chinese)

[8］ LIN Y H, LI Y F, ZIO E. Integrating random shocks into multi-state physics models of degradation processes for component reliability assessment[J]. IEEE Transactions on Reliability, 2015, 64(1): 154-166.
[9］陈童, 狄鹏, 尹东亮. 考虑维修优先权的多状态冷储备系统可靠性模型[J]. 兵工学报, 2017, 38(7): 1422-1429.
CHEN T, DI P, YIN D L. Reliability analysis of multi-state cold standby system with repair priority[J]. Acta Armamentarii, 2017, 38(7): 1422-1429. (in Chinese)

[10］葛玉华, 韩军, 冯虎田. 刀库及机械手多态可靠性建模与分析[J]. 组合机床与自动化加工技术, 2013(9): 21-24.
GE Y H, HAN J, FENG H T. Multi-state reliability modeling and analysis of tool magazine and manipulator[J]. Modular Machine Tool & Automatic Manufacturing Technique, 2013(9): 21-24. (in Chinese)
[11］ DESTERCKE S, SALLAK M. An extension of universal generating function in multi-state systems considering epistemic uncertainties[J]. IEEE Transactions on Reliability, 2013, 62(2): 504-514.
[12］ FRANCESCO D M, DAVIDE C, ZIO E, et al. A multi-state physics modeling approach for the reliability assessment of nuclear power plants piping systems[J]. Annals of Nuclear Energy, 2015, 80: 151-165.
[13］ YEH W C, CAO L B, JIN J S. A cellular automata hybrid quasi- random Monte Carlo simulation for estimating the one-to-all reliability of acyclic multi-state information networks[J]. International Journal of Innovative Computing, Information and Control, 2012, 82(3B): 2001-2014.
[14］刘林林, 任羿, 王自力, 等. 基于贝叶斯网络的GO法模型算法[J]. 系统工程与电子技术, 2015, 37(1): 212-218.
LIU L L, REN Y, WANG Z L, et al. Algorithm based on Bayesian networks for GO methodology[J].System Engineering and Electronics, 2015, 37(1): 212-218. (in Chinese)
[15］龚剑波, 黄民翔, 孙飞飞. 基于GO法的含分布式电源的配电系统可靠性评估[J]. 电力系统保护与控制, 2012, 40(16): 90-94.
GONG J B, HUANG M X, SUN F F. Reliability assessment based on GO methodology for the distribution system including distributed generation[J]. Power System Protection and Control, 2012, 40(16): 90-94. (in Chinese)
[16］ REN X L, ZHANG G B. Reliability analysis of supply chain based on GO methodology[J]. Applied Mechanics and Materials, 2010, 34/35(10): 387-392.
[17］尹晓伟, 钱文学, 谢里阳. 基于贝叶斯网络的多状态系统可靠性建模与评估[J]. 机械工程学报, 2009, 45(2): 206-212.
YIN X W, QIAN W X, XIE L Y. Multi-state system reliability modeling and assessment based on bayesian networks[J]. Journal of Mechanical Engineering,2009, 45(2): 206-212. (in Chinese)

第40卷
第4期2019 年4月兵工学报ACTA
ARMAMENTARIIVol.40No.4Apr.2019

[1]	SUN Chenfeng, L Weimin, CONG Linhu, XU Pengbo. Reliability Modelling of Hybrid Redundancy System Based on Generalized Stochastic Petri Nets [J]. Acta Armamentarii, 2022, 43(8): 2007-2016.
[2]	JIANG Xiuhong， LI Jiaxin， LIU Yanjuan， WANG Yuying. Reliability Analysis of Electric Aircraft Drive System with Feedback Loop [J]. Acta Armamentarii, 2022, 43(2): 451-457.
[3]	CAO Hui， DUAN Fuhai， JIANG Xiuhong. Research on Reliability Analysis of Multi-state System Based on UGF and GO Methodology [J]. Acta Armamentarii, 2020, 41(4): 792-798.