[1] LAWTON B. Thermo-chemical erosion in gun barrels[J]. Wear, 2001,251(1): 827-838. [2] SOPOK S, RICKARD C, DUNN S. Thermal-chemical-mechanical gun bore erosion of an advanced artillery system part one: theories and mechanisms[J]. Wear, 2005, 258(1/2/3/4): 671-683. [3] JOHNSTON I A. Understanding and predicting gun barrel erosion: DSTO-TR-1757[R]. Edinburgh,South Australia, Australia: Weapons Systems Diviion, Defence Science and Technology Organization, 2005. [4] UNDERWOOD J H, PARKER A P, COTE P J, et al. Compressive thermal yielding leading to hydrogen cracking in a fired cannon[J]. Journal of Pressure Vessel Technology, 1998, 121(1):116-120. [5] UNDERWOOD J H, PARKER A P, VIGILANTE G N, et al. Thermal damage, cracking and rapid erosion of cannon bore coatings[J]. Journal of Pressure Vessel Technology, 2003, 125(3):299-304. [6] UNDERWOOD J H, VIGILANTE G N, MULLIGAN C P. Review of thermo-mechanical cracking and wear mechanisms in large caliber guns[J]. Wear, 2007, 263(7):1616-1621. [7] WU C W, CHEN G N, ZHANG K, et al. The effect of periodic segmentation cracks on the interfacial debonding: study on interfacial stresses[J]. Surface & Coatings Technology, 2006, 201(1):287-291. [8] VIGILANTE G N, TAUSCHER S, UNDERWOOD J H, et al. Hydrogen-induced cracking test of high-strength steels and Nickel-Iron base alloys using the bolt-loaded specimen: ARCCB-TR-97008 [R].Watervliet, NY,US: US Army Armament Research, Development and Engineering Center, 1997. [9] TROIANO E, PARKER A P, UNDERWOOD J H. Mechanisms and modeling comparing HB7 and A723 high strength pressure vessel steels[J]. Journal of Pressure Vessel Technology, 2004, 126(11): 473-477.
[10] YANG B Q, ZHANG K, CHEN G N, et al. A quantitative analysis of the effect of laser transformation hardening on crack driving force in steels[J]. Surface & Coatings Technology, 2006, 201(6): 2208-2216. [11] YANG B Q, ZHANG K, CHEN G N, et al. Effect of a laser pre-quenched steel substrate surface on the crack driving force in a coating-steel substrate system[J]. Acta Materialia, 2007, 55(13): 4349-4358. [12] 乔自平, 李峻松, 薛钧. 大口径机枪枪管失效规律研究[J]. 兵工学报, 2015, 36(12):2231-2240. QIAO Z P, LI J S, XUE J. Research on the performance decay rule of large caliber machinegun barrel[J]. Acta Armamentarii,2015, 36(12):2231-2240.(in Chinese) [13] 游首先,丁志洪,王立,等.兵器工业科学技术辞典[M]. 北京:国防工业出版社,1998: 5-56. YOU S X, DING Z H, WANG L, et al. Dictionary ofordnance industry science and technology[M]. Beijing: National Defense Industry Press,1998: 5-56.(in Chinese) [14] 冯国铜, 周克栋, 赫雷,等. 连续射击下的枪管瞬态传热模型[J]. 弹道学报, 2016, 28(4):75-79. FENG G T, ZHOU K D, HE L, et al. Transient heat transfer model of gun barrel under successive firing[J].Journal of Ballistics, 2016, 28(4):75-79.(in Chinese) [15] 冯国铜, 周克栋, 赫雷,等. 复杂射击规范下枪管温度场数值分析与试验研究[J]. 北京理工大学学报, 2017, 37(10):1003-1008. FENG G T, ZHOU K D, HE L, et al. Numberial analysis and experimental study of gun barrel's temperature under complicated firing regulations[J]. Transactions of Beijing Institute of Technology, 2017, 37(10):1003-1008.(in Chinese) [16] 李强, 李鹏辉, 胡明, 等. 速射火炮身管冲击载荷下内膛塑性变形分析[J]. 中北大学学报(自然科学版), 2011, 32(5): 550-555. LI Q, LI P H, HU M, et al.Plastic deformation analysis of rapid-firing gun barrel under impact load[J]. Journal of North University of Chian (Natural Science Edition), 2011, 32(5): 550-555.(in Chinese) [17] UNDERWOOD J H, TROIANO E. Critical fracture processes in army cannons: a review[J]. Journal of Pressure Vessel Techno- logy, 2003, 125(3): 287-292. [18] UNDERWOOD J H, VIGILANTE G N, MULLIGAN C P, et al. Thermomechanically controlled erosion in army cannons: a review[J]. Journal of Pressure Vessel Technology, 2006, 128(2): 168-172. [19] SPENCER G L, DUQUETTE D J. Role of vanadium carbide traps in reducing the hydrogen embrittlement susceptibility of high strength alloy steels: ARCCB-TR-98016[R]. Watervliet, NY, US: Benet Laboratories, US Army Armament Research, Development and Engineering Center, 1998. [20] COTE P J, RICKARD C. Gas-metal reaction products in the erosion of chromium-plated gun bores[J]. Wear, 2000, 241(1): 17-25. [21] KIMURA J. Hydrogen gas erosion of high-energy LOVA propellants[C]∥Proceedings of the 16th International Symposium on Ballistics. San Francisco, CA, US: International Ballistic Society,1996. [22] 张国祥, 陈光南, 张坤, 等. 激光离散预处理基体镀铬身管延寿的力学机理研究[J]. 兵工学报, 2006, 27(6): 978-983. ZHANG G X, CHEN G N, ZHANG K, et al.The mechanical mechanism study on prolonging life of chromium-plated gun bore through laser discrete pretreatment[J]. Acta Armamentarii, 2006, 27(6): 978-983.(in Chinese) [23] 张国祥, 陈光南, 张坤, 等. 基体激光淬火对镀铬层界面剪切强度的影响[J]. 中国表面工程, 2006, 19(6): 25-28. ZHANG G X, CHEN G N, ZHANG K, et al.Effect of laser-quenched substrate on interfacial shear strength ofchromium plated coatings[J].China Surface Engineering, 2006, 19(6): 25-28.(in Chinese) [24] BHADESHIA H K D H. Prevention of hydrogen embrittlement in steels[J]. ISIJ International, 2016, 56(1):24-36.
第40卷 第4期2019 年4月兵工学报ACTA ARMAMENTARIIVol.40No.4Apr.2019
|