Research on Formation of 3-D Micro-surface in Ultrasonic Elliptical Vibration Cutting

doi:10.3969/j.issn.1000-1093.2017.10.017

Abstract

Abstract: In order to find the influence factors and the influence law of the 3-D micro-surface formation of ultrasonic elliptical vibration cutting, the elliptical vibration cutting process and 3-D cutting model are analyzed based on the metal cutting theory. The results show that the different phase difference eigenvalue between two adjacent turns in vibration cutting process has an important influence on the final surface geometry. The existing cutting test results show that the final surface shapes with the eigenvalues of 0 and 0.5 are very different, and the results agree with the theoretically analyzed results. Key

Key words: manufacturingtechnologyandequipment, ultrasonicellipticalvibration, surfacemorphology, precisionmachining

CLC Number:

TG506.5

ZHANG Guo-hua， LI Dong-dong， LI Mao-wei， ZHANG De-yuan. Research on Formation of 3-D Micro-surface in Ultrasonic Elliptical Vibration Cutting[J]. Acta Armamentarii, 2017, 38(10): 2002-2009.

References

［1］隈部淳一郎. 精密加工-振动切削基础与应用［M］. 韩一昆，译. 北京: 机械工业出版社, 1985.
Kumabe J．Fundamentals and application of vibration cutting［M］．HAN Yi-kun，translated．Beijing：China Machine Press，1985．(in Chinese)
［2］ Ma C X，Shamoto E，Moriwaki T．Study on the thrust cutting force in ultrasonic elliptical vibration cutting ［J］.Materials Science Forum, 2004: 396-400, 467-470．
［3］张德远, 张成茂. 飞机交点孔超声椭圆振动精密加工技术［J］. 中国机械工程, 2012, 23(1):39-41．
ZHANG De-yuan, ZHANG Cheng-mao．Ultrasonic elliptical vibration precision machining for aircraft intersection holes ［J］．China Mechanical Engineering, 2012, 23(1):39-41．(in Chinese)
［4］ Zhou X Q, Zuo C M, Liu Q, et al. Surface generation of freeform surfaces in diamond turning by applying double-frequency elliptical vibration cutting［J］. International Journal of Machine Tools & Manufacture, 2016, 104:45-57.
［5］ Zhang J, Suzuki N, Wang Y, et al. Ultra-precision nano-structure fabrication by amplitude control sculpturing method in elliptical vibration cutting［J］. Precision Engineering, 2015, 39:86-99．
［6］ Kim G D，Loh B G．An ultrasonic elliptical vibration cutting device for micro V-groove machining：kinematical analysis and micro V-groove machining characteristics［J］．Journal of Materials Processing Technology，2007, 190(1):181-188．
［7］马春翔，社本英二，森肋俊道，等．超声波椭圆振动切削提高加工系统稳定性的研究［J］．兵工学报，2004，25(6)：752-756．
MA Chun-xiang，Shamoto E，Moriwaki T，et a1．Study on the improvement of machining system stability by applying ultrasonic elliptical vibration cutting［J］．Acta Armamentarii，2004，25(6)：752-756． (in Chinese)
［8］ Jung H, Hayasaka T, Shamoto E. Mechanism and suppression of frictional chatter in high-efficiency elliptical vibration cutting［J］. CIRP Annals-Manufacturing Technology, 2016, 65(1):369-372.
［9］ Lin J, Han J, Zhou X, et al. Study on predictive model of cutting force and geometry parameters for oblique elliptical vibration cutting［J］. International Journal of Mechanical Sciences, 2016, 117:43-52．

［10］ Nath C，Rahman M，Neo K S．A study on the effect of tool nose radius in ultrasonic elliptical vibration cutting of tungsten carbide ［J］．Journal of Materials Processing Technology，2009，209(17)：5830-5836．
［11］ Kurniawan R, Kiswanto G, Ko T J. Micro-dimple pattern process and orthogonal cutting force analysis of elliptical vibration texturing［J］. International Journal of Machine Tools & Manufacture, 2016, 106:127-140.
［12］张成茂，张德远．导套式椭圆超声镗削模拟实验研究［J］．兵工学报，2013，34(4)：465-470．
ZHANG Cheng-mao, ZHANG De-yuan．Simulation experiment study on elliptical ultrasonic vibration boring of leading bushing ［J］．Acta Armamentarii，2013，34(4)：465-470．(in Chinese)
［13］陈日曜. 金属切削原理［M］. 第2版.北京: 机械工业出版社，2012.
CHEN Ri-yao．Metal-cutting principie ［M］．2nd ed. Beijing：China Machine Press，2012．(in Chinese)
［14］李勋, 张德远. 超声椭圆振动切削表面形貌形成机理的研究［J］. 中国机械工程, 2009, 2(7): 807-811.
LI Xun，ZHANG De-yuan．Research on micro-surface formation mechanism of ultrasonic elliptical vibration cutting ［J］．China Mechanical Engineering，2009, 2(7): 807-811．(in Chinese)

第38卷
第10期2017 年10月兵工学报ACTA
ARMAMENTARIIVol.38No.10Oct.2017

[1]	JIANG Yu'an, PI Jun, YANG Guang, JIANG Tao, SHEN Zhihuang. Influence of Ultrasonic Elliptical Vibration Cutting Trajectory Change on Surface Morphology [J]. Acta Armamentarii, 2019, 40(10): 2170-2176.
[2]	SHEN Chao, ZHOU Ke-dong, LU Ye, QIAO Zi-ping. Research on the Influence of Damaged Bore of a Large Caliber Machine Gun on Bullet Engraving Progress [J]. Acta Armamentarii, 2018, 39(12): 2320-2329.
[3]	XIN Bin， LI Shu-juan， LI Yu-xi. Experimental Research and Optimization of Process Parameters in the Electrical Discharge Machining of Monocrystalline Silicon [J]. Acta Armamentarii, 2017, 38(9): 1854-1861.
[4]	LIN Tao, YANG Wei, WANG Jian. Research on Material Removal Model of Optical Elements Based on Fast Polishing Technology [J]. Acta Armamentarii, 2017, 38(3): 527-533.