Research on Critical Open and Close Pressures of an Oil Discharge Valve for High Speed Wet Shifting Clutch

doi:10.3969/j.issn.1000-1093.2017.09.001

Abstract

Abstract: For the imperfect discharge of oil in the piston chamber during the rotation of wet clutch at a high speed, a centrifugal oil discharge valve structure is researched. A mathematical model of oil discharge valve is established based on the force analysis, and the movement process of steel ball in oil discharge valve is analyzed. A test system for wet clutch system with oil discharge valve is developed. The critical open and close pressures of the oil discharge valve are studied through experiment. The simulated and experimental results show that the oil discharge valve can effectively discharge the remaining oil in the piston chamber when the wet clutch separates at a high speed, and the critical open and close pressure features of the oil discharge valve are obtained. The critical open and close pressures increase with the increase in the tilting angle of valve body, α, and the radius of steel ball, r_b . According to the changing feature, a computing method for calculating α and r_b from the minimum value of critical open pressure and the maximum value of critical close pressure is proposed. Key

Key words: ordnancescienceandtechnology, integratedtransmission, highspeedwetclutch, oildischargevalve, motionlaw, criticalopenpressure, criticalclosepressure

CLC Number:

TJ810.3⁺21

LOU Wei-peng, ZHENG Chang-song, LI He-yan, CHEN Jian-wen, ZHANG Zhou-li, MA Yuan. Research on Critical Open and Close Pressures of an Oil Discharge Valve for High Speed Wet Shifting Clutch[J]. Acta Armamentarii, 2017, 38(9): 1665-1672.

References

［1］姚雄伟，马彪. 不同位置卸压孔工作过程动态特性仿真与试验研究［J］. 车辆与动力技术，2006(2):8-11.
YAO Xiong-wei, MA Biao. Simulation and experiment research of dynamic performance in working process of depressurization holes in different position［J］. Vehicle & Power Technology, 2006(2): 8-11. (in Chinese)
［2］ Meng F， Zhang H, Cao D P. System modeling and pressure control of a clutch actuator for heavy-duty automatic transmission systems［J］. Transactions on Vehicular Technology,2016,65(7):4865-4874.
［3］ Ompusunggu A P.On the derivation of the pre-lockup feature based condition monitoring method for automatic transmission clutches［J］. Mechanical Systems and Signal Processing,2014,46(1): 114-128.
［4］ Meng F, Chen H, Zhang T, et al. Clutch fill control of an automatic transmission for heavy-duty vehicle applications［J］. Mechanical Systems and Signal Processing, 2015, 64: 16-28.
［5］赵鑫鑫, 张文明, 冯雅丽,等. 工程车辆自动变速器换挡过程建模与仿真［J］. 华中科技大学学报：自然科学版, 2014, 42(3): 112-116.
ZHAO Xin-xin, ZHANG Wen-ming, FENG Ya-li, et al.Gear shift modeling and simulation for construction vehicle［J］ Journal of Huazhong University of Science & Technology:Natural Science Edition,2014, 42(3):112-116. (in Chinese)
［6］游四海, 俞宁. 高速换挡湿式离合器卸油性能研究［J］.工程机械, 2007, 38(3):30-34.
YOU Si-hai, YU Ning. Research of oil drainage performance for high speed wet shifting clutch［J］. Construction Machinery and Equipment， 2007, 38(3):30-34. (in Chinese)
［7］张金乐.综合传动换挡离合器控制技术研究［D］.北京：北京理工大学，2007:38-40.
ZHANG Jin-le. Study on the control technology of shift clutch for power-shift steering transmission［D］. Beijing: Beijing Institute of Technology, 2007:38-40. (in Chinese)
［8］石彦辉，姜宏暄，冯光军，等. 自动变速器离心甩油阀动态特性研究［J］. 制造业自动化，2015，37(4):6-10.
SHI Yan-hui, JIANG Hong-xuan, FENG Guang-jun, et al. Study of the dynamic characteristic of centrifugal-type oil-discharge valve for automatic transmission［J］. Manufacturing Automation, 2015，37(4):6-10. (in Chinese)
［9］梁玲，许纯新. 推土机换档离合器中快速排油阀的设计计算［J］. 工程机械,1989 (4):24-27.
LIANG Ling, XU Chun-xin. The design calculation of the discharge oil valve for bulldozer shift clutch［J］. Construction Machinery and Equipment,1989 (4):24-27. (in Chinese)

［10］卞学良. 换挡离合器快速排油阀性能评价指标［J］. 工程机械,1998(3):6-8.
BIAN Xue-liang. The evaluation index of the oil discharge valve for shift clutch［J］. Construction Machinery and Equipment, 1998(3):6-8. (in Chinese)
［11］ Song X Y, Zulkefli M A M, Sun Z X, et al. Modeling, analysis, and optimal design of the automotive transmission ball capsule system［J］. Journal of Dynamic Systems, Measurement, and Control, 2010,132(2): 021003.1-021003.12.
［12］李文科.工程流体力学［M］.合肥：中国科学技术大学出版社，2007:215-217.
LI Wen-ke. Engineering fluid dynamics［M］. Hefei: China Science and Technology University Press, 2007:215-217. (in Chinese)
［13］路甬祥,胡大. 电液比例控制技术［M］. 北京: 机械工业出版社，1988:199-201.
LU Yong-xiang, HU Da . Electro-hydraulic proportional control technology［M］. Beijing: China Machine Press, 1988:199-201.(in Chinese)

第38卷
第9期2017 年9月兵工学报ACTA
ARMAMENTARIIVol.38No.9Sep.2017

[1]	CHEN Juan， ZHOU Guangming， LI Xintong， ZOU Tiangang， HOU Wei， SUN Xueyan. MBSE-based Requirement Analysis of Transmission System [J]. Acta Armamentarii, 2022, 43(S1): 11-20.
[2]	LI Shurui， DUAN Zhuoping， ZHENG Baohui， LUO Guan， HUANG Fenglei. Cylinder Test and Equation of State for DNAN-based Aluminized Melt-cast Explosive [J]. Acta Armamentarii, 2021, 42(7): 1424-1430.
[3]	WANG Xian-cheng, YANG Shao-qing, MA Ning, ZHAO Wen-zhu. Research on Wear Model for Cylinder Liners in Vehicle Diesel Engines under Dynamic Load [J]. Acta Armamentarii, 2017, 38(9): 1673-1680.
[4]	SUN Hao-ze, CHANG Tian-qing, WANG Quan-dong, KONG De-peng, DAI Wen-jun. Image Detection Method for Tank and Armored Targets Based on Hierarchical Multi-scale Convolution Feature Extraction [J]. Acta Armamentarii, 2017, 38(9): 1681-1691.
[5]	ZHANG Yu-yan, SUN Sha-sha, WANG Zhen-chun, CAO Hai-yao, ZHAN Zai-ji. Simulation and Measurement of Surface Transient Temperature Field of High-speed Current-carrying Armature [J]. Acta Armamentarii, 2017, 38(9): 1692-1698.
[6]	LI Chen-ming， HUAN Chao， SHI Huai-long. Optimal Fire Distribution of a Rocket Launcher against Area Target [J]. Acta Armamentarii, 2017, 38(9): 1699-1704.
[7]	LEI Juan-mian, ZHANG Jia-wei, TAN Zhao-ming. Influence of Boattail on the Magnus Effect of Spinning Non-finned Projectile at Small Angles of Attack [J]. Acta Armamentarii, 2017, 38(9): 1705-1715.
[8]	LI Ze, YAN Xiao-peng, LI Ping, HAO Xin-hong, WANG Jian-tao. Jamming Mechanism of Frequency Sweep Jamming to FM Doppler Fuze [J]. Acta Armamentarii, 2017, 38(9): 1716-1722.
[9]	ZHANG Hao-wei, XIE Jun-wei, ZHANG Zhao-jian, ZONG Bin-feng, CHEN Tang-jun. Task Scheduling of Phased Array Radar Based on Hybrid Adaptive Genetic Algorithm [J]. Acta Armamentarii, 2017, 38(9): 1761-1770.
[10]	LI Mao， HOU Hai-liang， ZHU Xi， HUANG Xiao-ming， LI Dian， CHEN Chang-hai， HU Nian-ming. Influence of Structural Interspace on Anti-penetration Performance of Para-aramid Fiber-reinforced Composite Armor System [J]. Acta Armamentarii, 2017, 38(9): 1797-1805.
[11]	WANG Jian, HAN Yan, WANG Li-ming, ZHANG Pi-zhuang, CHEN Ping. Estimation Method for Instantaneous Frequency of Echo Signal of Projectile in Bore [J]. Acta Armamentarii, 2017, 38(9): 1806-1814.
[12]	LIU Hai-ou, ZHANG Wen-sheng, XU Yi, ZHAO Zi-ye. Load Spectrum Compiling for Transmission Shaft of Tracked Vehicle Based on Kernel Density Estimation [J]. Acta Armamentarii, 2017, 38(9): 1830-1838.
[13]	JIANG Miao-wen , YAN Jian-zhuo, CHEN Ji-min. 3D Printing of Military Helmet Liner Structure Based on Topology Optimization [J]. Acta Armamentarii, 2017, 38(9): 1845-1853.
[14]	ZHANG Lei, LI Shi-min, ZHU Gang. Study of Equipment Material Demand Prediction Method Based on Time-continuous Grey Markov Model [J]. Acta Armamentarii, 2017, 38(9): 1862-1866.
[15]	ZHANG Ya-zhou, LI Zhen-xiao, CHENG Nian-kai, TIAN Hui, LI Bao-ming. Research on a Triggered Vacuum Switch Pulsed Power Supply [J]. Acta Armamentarii, 2017, 38(8): 1469-1475.