Welcome to Acta Armamentarii ! Today is Share:

Acta Armamentarii ›› 2015, Vol. 36 ›› Issue (12): 2381-2385.doi: 10.3969/j.issn.1000-1093.2015.12.023

• Research Notes • Previous Articles     Next Articles

Research on Internal Ballistics Design Method of Water-projectile Test after Gun Repair

FU Jian-ping1,ZHANG Ze-feng1,YU Jia-wu2,LI Lei2   

  1. (1.Department of Artillery Engineering,Ordnance Engineering College,Shijiazhuang 050003,Hebei,China;2.Presentation Room, No 157 Stateowned Factory, Chengdu 610000, Sichuan, China)
  • Received:2015-03-22 Revised:2015-03-22 Online:2016-02-02
  • Contact: FU Jian-ping E-mail:2101370148@qq.com

Abstract: Gun water-projectile test is widely used to determine its technology state and inspect its repair quality after repairing. It is difficult to determine the key internal ballistic parameters in the mass of water-projectile because an internal ballistics design method on water-projectile test lacks for the new guns, which is restricted to carry out water-projectile test. An internal ballistics model of water-projectile test is established based on the principle of water-projectile test and its engineering practice. The internal ballistics design method based on the impulse equal principle of gun bore resultant forces in water-projectile test and live firing is introduced. The research result can preovid theoretical guidance for water-projectile test after new gun repair, and provide the reference for the water-projectile test of the other assessment purposes.

Key words: ordnance science and technology, gun, water-projectile test, internal ballistics design, resultant forces of gun bore, impulse

CLC Number: