Calibration and Verification of Dynamic Mechanical Properties of High-strength Armored Steel Based on Johnson-Cook ConstitutiveModel

doi:10.12382/bgxb.2021.0409

Abstract

Abstract: A specific type of armored steel with high yield strength has been widely used in China to improve the protection performance of armored vehicles. To numerically simulate the dynamic properties of the material，the material’s dynamic constitutive parameters based on the Johnson-Cook constitutive model are calibrated and verified through experiments. First，quasi-static mechanical properties of the armor steel are systematically measured using a universal material testing machine under temperatures ranging from room temperature to 550 ℃.The compression properties of the material are further measured at various strain rates using a separated Hopkinson pressure bar system. Second，based on the Johnson-Cook constitutive model，the measured dynamic properties of the armor steel are fitted to obtain the material’s constitutive parameters. Finally，a monolithic beam made of the armor steel is impacted by a aluminum foam projectile launched from a light-gas gun，and the test results are compared with finite element simulation results obtained using the constitutive parameters and the ideal elastic-plastic constitutive model. The results show that the armor steel demonstrates strong strain rate strengthening effect and thermal softening effect. The relative error between the peak deflection values of the monolithic beam obtained from J-C constitutive model simulation and experimental study is 1.7%-6.1%，and that for residual deflection is 0.6%-7.6%.

Key words: high-strengtharmorsteel, Johnson-Cookconstitutivemodel, dynamicmechanicalproperties, aluminumfoamprojectile, impacttest

CLC Number:

O347.3

ZHANG Dujiang， ZHAO Zhenyu， HE Liang， REN Jianwei， QIANG Lusheng， ZHOU Yilai. Calibration and Verification of Dynamic Mechanical Properties of High-strength Armored Steel Based on Johnson-Cook ConstitutiveModel[J]. Acta Armamentarii, 2022, 43(8): 1966-1976.

References

［1］ BRVIK T, OLOVSSON L, HANSSEN A G, et al. A discrete particle approach to simulate the combined effect of blast and sand impact loading of steel plates[J].Journal of the Mechanics and Physics of Solids, 2011, 59(5): 940-958.
[2］ PICKERING E G, CHUNG KIM YUEN S, NURICK G N, et al. The response of quadrangular plates to buried charges[J].International Journal of Impact Engineering, 2012, 49:103-114.
[3］ UTH T, WADLEY H N G, DESHPANDE V S. The effect of inclination and stand-off on the dynamic response of beams impacted by slugs of a granular material[J]. International Journal of Solids and Structures, 2015, 56-57:154-174.
[4］孙晓旺, 张进成, 彭兵, 等.军用车辆底部爆炸冲击下载员下肢保护装置设计与优化[J].兵工学报, 2021, 42(12): 2555-64.
SUN X W, ZHANG J C, PENG B, et al. Design and optimization of occupant lower limb protection device against explosion shock below military vehicle[J].Acta Armamentarii, 2021, 42(12): 2555-64. (in Chinese)
[5］李明星, 张明, 陈四春, 等.爆炸载荷冲击下假人下肢的材料参数识别和修正方法[J].兵工学报, 2021, 42(9): 1895-1901.
LI M X, ZHANG M, CHEN S C, et al. Identification and correction method of material parameters of dummy's lower limbs subjected to impact of explosive load[J].Acta Armamentarii, 2021, 42(9): 1895-1901. (in Chinese)
[6］赵振宇, 任建伟, 金峰, 等.V形防护结构研究综述[J].应用力学学报, 2020, 37(6):2527-2534.
ZHAO Z Y, REN J W, JIN F, et al. Investigation process on V-shape protective structures[J].Chinese Journal of Applied Mechanics, 2020, 37(6):2527-2534.(in Chinese)
[7］ TRAJKOVSKI J, PERENDA J, KUNC R. Blast response of Light Armoured Vehicles (LAVs) with flat and V-hull floor[J].Thin-Walled Structures, 2018, 131: 238-244.
[8］ KYNER A, DESHPANDE V, WADLEY H N G. Momentum transfer during the impact of granular matter with inclined sliding surfaces[J].Journal of the Mechanics and Physics of Solids, 2017, 106: 283-312.
[9］程远胜, 谢杰克, 李哲, 等.冲击波和破片群联合作用下高强聚乙烯/泡沫铝夹芯复合结构毁伤响应特性[J].兵工学报, 2021, 42(8): 1753-1762.
CHENG Y S, XIE J K, LI Z, et al. Damage response characteristics of UHMWPE /aluminum foam composite sandwich panel subjected to combined blast and fragment loadings[J].Acta Armamentarii, 2021, 42(8): 1753-1762. (in Chinese)
[10］ JONES N.Structural Impact[M].New York, NY, US：Cambridge UniversityPress, 1989.
[11］ JOHNSON G R, COOK W H. Fracture characteristics of three metals subjected to various strains, strain rates, temperatures and pressures[J].Engineering Fracture Mechanics, 1985, 21(1): 31-48.
[12］高玉龙, 孙晓红.高速列车用6008铝合金动态变形本构与损伤模型参数研究[J].爆炸与冲击, 2021, 41(3): 118-129.
GAO Y L, SUN X H. Investigations on the parameters of dynamic deformation and damage models of high speed railway vehicle aluminum alloys[J]. Explosion and Shock Waves, 2021, 41(3): 118-129. (in Chinese)
[13］胡昌明, 贺红亮, 胡时胜. 45号钢的动态力学性能研究[J].爆炸与冲击, 2003, 23(2):188-192.
HU C M, HE H L, HU S S. A study on dynamic mechancial behaviors of 45 steel[J]. Explosion and Shock Waves, 2003, 23(2): 188-192. (in Chinese)
[14］郭子涛, 高斌, 郭钊, 等.基于J-C模型的Q235钢的动态本构关系[J].爆炸与冲击, 2018, 38(4): 804-810.
GUO Z T, GAO B, GUO Z, et al. Dynamic constitutive relation based on J-C model of Q235 steel[J].Explosion and Shock Waves, 2018, 38(4): 804-810. (in Chinese)
[15］ SENTHIL K, IQBAL M A, CHANDEL P S, et al. Study of the constitutive behavior of 7075-T651 aluminum alloy[J]. International Journal of Impact Engineering, 2017, 108: 171-190.
[16］ NAHSHON K, PONTIN M G, EVANS G A, et al. Dynamic shear rupture of steel plates[J].Journal of Mechanics of Materials and Structures, 2007, 2: 2049-2066.
[17］ DEY S, BRVIK T, HOPPERSTAD O S, et al. The effect of target strength on the perforation of steel plates using three different projectile nose shapes[J]. International Journal of Impact Engineering, 2004, 30: 1005-1038.
[18］ IQBAL M A, SENTHIL K, SHARMA P, et al. An investigation of the constitutive behavior of Armox 500T steel and armor piercing incendiary projectile material[J]. International Journal of Impact Engineering, 2016, 96: 146-164.
[19］ SEO S, MIN O, YANG H. Constitutive equation for Ti-6Al-4V at high temperatures measured using the SHPB technique[J].International Journal of Impact Engineering, 2005, 31(6):735-754.
[20］李明星, 王显会, 周云波, 等.基于神经网络的车辆抗冲击防护组件优化[J].爆炸与冲击, 2020, 40(2):110-118.
LI M X, WANG X H, ZHOU Y B, et al. Research on optimization of vehicle anti-shock protection components based on neural network[J].Explosion and Shock Waves, 2020, 40(2):110-118.(in Chinese)
[21］ WANG J J, GUO W G, GAO X S, et al. The third-type of strain aging and the constitutive modeling of a Q235B steel over a wide range of temperatures and strain rates[J].International Journal of Plasticity, 2015, 65: 85-107.
[22］王建军, 袁康博, 张晓琼, 等.第三型应变时效的提出与研究进展[J].爆炸与冲击, 2021, 41(5):051101.
WANG J J, YUAN K B, ZHANG X Q, et al. Proposition and research progress of the third-type strain aging[J].Explosion and Shock Waves, 2021, 41(5):051101.(in Chinese)
[23］徐翔民, 张予东, 李宾杰, 等.纳米SiO₂/尼龙66复合材料的力学性能和热性能[J].复合材料学报, 2008,25(4):56-61.
XU X M, ZHANG Y D, LI B J, et al. Mechanical and thermal properties of nano-SiO₂/PA66 composites[J].Acta Materiae Composite Sinica, 2008,25(4):56-61. (in Chinese)
[24］ MILTZ J, RAMON O. Energy absorption characteristics of polymeric foams used as cushioning materials[J].Polymer Engineering and Science, 1990, 30: 129-133.
[25］ RUBINO V, DESHPANDE V S, FLECK N A. The dynamic response of end-clamped sandwich beams with a Y-frame or corrugated core[J].International Journal of Impact Engineering, 2008, 35(8): 829-844.
[26］ DESHPANDE V, FLECK N. High strain rate compressive behaviour of aluminium alloy foams[J]. International Journal of Impact Engineering, 2000:277-298.
[27］高华, 熊超, 殷军辉.多次冲击下泡沫铝动态压缩力学性能试验与本构模型研究[J].兵工学报, 2018, 39(12): 2410-2419.
GAO H, XIONG C, YIN J H. Experimental and constitutive model on dynamic compressive mechanical properties of aluminum foams under repeated impacts[J].Acta Armamentarii, 2018, 39(12): 2410-2419. (in Chinese)
[28］ RADFORD D D, MCSHANE G J, DESHPANDE V S, et al. The response of clamped sandwich plates with metallic foam cores to simulated blast loading[J].International Journal of Solids and Structures, 2006, 43(7/8): 2243-2259.
[29］ WANG X, YU R P, ZHANG Q C, et al. Dynamic response of clamped sandwich beams with fluid-fillied corrugated cores[J].International Journal of Impact Engineering, 2020, 139:103533.
[30］ YU R P, WANG X, ZHANG Q C, et al. Effects of sand filling on the dynamic response of corrugated core sandwich beams under foam projectile impact[J].Composites Part B: Engineering, 2020, 197:108135.

[1]	JIANG Mingfei, XU Hui, HUANG Chenlei, LIU Kun, WU Zhilin. Experimental Study and Constitutive Model for the Dynamic Mechanical Properties of Ballistic Gelatine [J]. Acta Armamentarii, 2022, 43(9): 2113-2120.
[2]	LIU Jihua， ZHAO Hongli， HE Changhui， JIN Jianwei， ZHANG Zouzou, WANG Qionglin, ZHAO Baoming. Analysis Method for Elastic Modulus of Typical Gun-propellant under Impact Loading [J]. Acta Armamentarii, 2021, 42(2): 289-296.
[3]	LI Dongwei， MIAO Feichao， ZHANG Xiangrong， XIONG Guosong， ZHOU Lin， ZHAO Shuangshuang. Dynamic Mechanical Properties of an Insensitive DNAN-based Melt-cast Explosive [J]. Acta Armamentarii, 2021, 42(11): 2344-2349.
[4]	XU Xuefeng， WANG Lin， CHENG Xingwang， LIU Anjin， TAYYEB Ali, ZHOU Zhe， NING Zixuan， ZHANG Binbin， ZHAO Denghui. Dynamic Observation of Fracture Microstructure of Ti6321 Titanium Alloy in TaylorBar Impact Test [J]. Acta Armamentarii, 2020, 41(7): 1401-1407.