[1] WANG W R,ZHANG J M,REN X,et al. Research and calibration experiment of characteristic parameters of high temperature resistance strain gauges[J].Sensors & Transducers Journal,2013,159(11):324-329. [2] LI Y L,GUO Y Z,HU H T,et al. A critical assessment of high-temperature dynamic mechanical testing of metals[J]. International Journal of Impact Engineering,2009,36(2):177-184. [3] 尹福炎,王文瑞,闫晓强.高温/低温电阻应变片及其应用[M].北京:国防工业出版社,2014:25-40. YIN F Y,WANG W R,YAN X Q. High/low temperature resistance strain gauge research and application[M].Beijing: National Defense Industry Press,2014:25-40. (in Chinese) [4] 王成亮,曹志伟,武小峰,等.高温环境下电阻应变测试技术研究[J].强度与环境,2020,47(3):51-56. WANG C L,CAO Z W,WU X F,et al.Research on resistance strain measuring technology in high temperature environment[J].Structure & Environment Engineering,2020,47(3):51-56. (in Chinese) [5] 晏志鹏.高温灵敏系数标定影响因素分析[J].计测技术,2019,39(4):85-92. YAN Z P.Analysis of influence factors for high temperature sensitivity calibration[J].Metrology & Measurement Technology,2019,39(4):85-92. (in Chinese) [6] ZARFL C,SCHMID P,BALOGH G,et al. TiAlN thin films as high temperature strain gauges[J].Procedia Engineering,2014,87:136-139. [7] 王文瑞,张佳明,闫晓强,等.高温应变片关键参数标定方法[J].工程科学学报,2015,37(12):1645-1650. WANG W R,ZHANG J M,YAN X Q,et al. Calibration method for the core parameters of high temperature strain gauges[J].Chinese Journal of Engineering,2015,37(12):1645-1650. (in Chinese) [8] 刘梓才,卢琰琰,何承义.高温应变片标定装置设计[J].原子能科学技术,2008,42(增刊):704-706. LIU Z C,LU Y Y,HE C Y.Design of calibration apparatus of high temperature strain gauge[J].Atomic Energy Science and Technology,2008,42(S):704-706. (in Chinese) [9] LIU H,MAO X L,YANG Z B,et al. High temperature static and dynamic strain response of PdCr thin film strain gauge prepared on Ni-based superalloy[J].Sensors and Actuators A:Physical,2019,298:111571. [10] FIELD J E,WALLEY S M,PROUD W G,et al. Review of experimental techniques for high rate deformation and shock studies[J].International Journal of Impact Engineering, 2004,30(7): 725-775. [11] ZHANG Q B,ZHAO J. A review of dynamic experimental techniques and mechanical behavior of rock materials[J]. Rock Mechanics & Rock Engineering,2014,47(4):1411-1478. [12] 袁康博,郭伟国.高g值加速度计动态线性度标定方法研究[J].兵工学报,2017,38(12):2429-2437. YUAN K B,GUO W G. Research on the dynamic linearity calibration method of high-g accelerometers[J].Acta Armamentarii,2017,38(12):2429-2437.(in Chinese) [13] 吴倩,郭伟国.基于矢量分解的三轴高g值加速度计灵敏度系数校准方法[J].兵工学报,2021,42(7):1535-1543. WU Q,GUO W G. Calibration of sensitivity coefficient of thee-dimensional high-g accelerometer based on vector decomposition[J]. Acta Armamentarii,2021,42(7):1535-1543. (in Chinese) [14] 夏开文,程经毅,胡时胜. SHPB装置应用于测量高温动态力学性能的研究[J].实验力学,1998,13(3):307-313. XIA K W,CHENG J Y,HU S S. Application of SHPB apparatus to the measurement of high temperature dynamical mechanical behavior of materials[J]. Journal of Experimental Mechanics,1998,13(3):307-313. (in Chinese) [15] NEMAT-NASSER S,ISAACS J B. Direct measurement of isothermal flow stress of metals at elevated temperatures and high strain rates with application to Ta and Ta-W alloys[J]. Acta Materialia,1997,45(3):907-919. [16] NEMAT-NASSER S,GUO W G.Thermomechanical response of HSLA-65 steel plates:experiments and modeling[J]. Mechanics of Materials,2005,37(2/3):379-405. [17] NEMAT-NASSER S,GUO W G,NESTERENKO V F,et al. Dynamic response of conventional and hot isostatically pressed Ti-6Al-4V alloys:experiments and modeling[J]. Mechanics of Materials,2001,33(8):425-439. [18] 李玉龙,索涛,郭伟国,等.确定材料在高温高应变率下动态性能的Hopkinson杆系统[J].爆炸与冲击,2005,25(6):487-492. LI Y L,SUO T,GUO W G,et al. Determination of dynamic behavior of materials at elevated temperatures and high strain rates using Hopkinson bar[J].Explosion and Shock Waves,2005,25(6):487-492. (in Chinese) [19] 郭伟国,朱泽,曾志银,等.高温高应变率拉伸同步实验装置:CN202886209U [P].2013-04-17. GUO W G,ZHU Z,ZENG Z Y,et al. High temperature and high strain rate tensile synchronous experimental equipment: CN202886209U[P].2013-04-17. (in Chinese) [20] TAN X M,GUO W G,GAO X S,et al. A new technique for conducting split Hopkinson tensile bar test at elevated temperatures[J]. Experimental Techniques,2017,41(2): 191-201. [21] 李鹏辉,郭伟国,刘开业,等.材料超高温动态拉伸SHTB实验方法的有效性分析[J].爆炸与冲击,2018,38(2):426-436. LI P H,GUO W G,LIU K Y,et al. Validity analysis of materials' dynamic tensile SHTB experimental technique at ultrahigh temperature[J]. Explosion and Shock Waves,2018, 38(2):426-436. (in Chinese) [22] 王礼立.应力波基础[M].北京:国防工业出版社,2005:1-20. WANG L L.Foundation of stress waves[M].Beijing:National Defense Industry Press,2005:1-20. (in Chinese) [23] LU F Y,LIN Y L,WANG X Y,et al.A theoretical analysis about the influence of interfacial friction in SHPB tests[J]. International Journal of Impact Engineering,2015,79:95-101. [24] FLORES-JOHNSON E A,SHEN L M,GUIAMATSIA I,et al.Numerical investigation of the impact behaviour of bioinspired nacre-like aluminium composite plates[J]. Composites Science and Technology,2014,96:13-22. [25] 郭奇亮. 滑动摩擦下氮化硼与几种常用固体润滑剂添加效果的比较[J].贵州工业大学学报,1997,26(6):41-46. GUO Q L.The contrast between the effect of boron nitride and that of common solid lubricant additives on sliding friction[J].Journal of Guizhou University of Technology,1997,26(6):41-46.(in Chinese)