WEN Yihao, WANG Jinjin, ZHA Bailin, XU Zhigao. Influence of Twice Air-entering on the Combustion and Ablation Environment of Solid Rocket Ramjet[J]. Acta Armamentarii, 2022, 43(4): 804-813.
[1] 鲍福廷,黄熙军,张振鹏,等.固体火箭冲压组合发动机[M].北京:中国宇航出版社,2006: 1-2. BAO F T,HUANG X J,ZHANG Z P,et al. Integral solid propellant ramjet rocket motor[M].Beijing: China Aerospace Publishing House,2006:1-2. (in Chinese) [2] PEIN R,VINNEMEIER F. Swirl and fuel composition effects on boron combustion in solid-fuel ramjets[J]. Journal of Propulsion and Power,1992,3(8):609-614. [3] VIGOT C,COCHET A,GUIN C.Combustion behavior of boron-based solid propellants in a ducted rocket[J]. International Journal of Energetic Materials & Chemical Propulsion,1991,2(1/2/3/4/5/6):386-401. [4] 胡春波,李强,何洪庆,等.喷口数与进气道角对固冲发动机补燃室气流掺混的影响[J].固体火箭技术,2003,26(4):14-17. HU C B,LI Q,HE H Q,et al. Effects of the air inlet angle and jet number on mixing flow in the afterburning chamber of solid rocket ramjet[J].Journal of Solid Rocket Technology,2003,26(4):14-17. (in Chinese) [5] 许超.补燃室结构对冲压发动机二次燃烧影响研究[D]. 西安:西北工业大学,2007. XU C.Influence of after-burning chamber configuration on the secondary combustion of ramjet[D].Xi'an: Northwestern Polytechnical University,2007. (in Chinese) [6] 李敏剑,严聪,冯锦虎,等.进气道直径大小对固冲发动机内流场的影响研究[J].弹箭与制导学报,2010,30(1):153-156. LI M J,YAN C,FENG J H,et al.Researches on different diameters of air-inlet pipe's influences to the inside flow field of a solid rocket ramjet engine[J].Journal of Projectiles,Rockets,Missiles and Guidance,2010,30(1):153-156. (in Chinese) [7] 赵洪章,李进贤,曹琪.进气形式对冲压发动机二次燃烧的影响[J].弹箭与制导学报,2011,31(2):114-116. ZHAO H Z,LI J X,CAO Q. The effect of inlet mode on after-burning of ramjet[J].Journal of Projectiles, Rockets,Missiles and Guidance,2011, 31(2):114-116. (in Chinese) [8] 李洁,冯喜平,李进贤,等.二次进气角度对固冲发动机掺混燃烧的影响[J].科学技术与工程,2013,13(16):4757-4760. LI J,FENG X P,LI J X,et al. Influence of secondary air-in angle on the SDR mixing combustion[J]. Science Technology and Engineering,2013,13(16):4757-4760. (in Chinese) [9] 王洪远,徐义华,胡旭,等.空气旋转进气对含硼固体冲压发动机二次燃烧性能影响的研究[J].兵工学报,2015,36(4): 619-625. WANG H Y,XU Y H,HU X,et al. Research on the characteristics of secondary combustion of boron-based ducted rocket with swirling air injection[J].Acta Armamentarii,2015,36(4):619-625. (in Chinese) [10] XU Y H,JIA R,MEDINA H,et al. Effect of tangential swirl air inlet angle on the combustion efficiency of a hybrid powder-solid ramjet[J].Acta Astronautica,2019,159:87-95. [11] LI W X,CHEN X,SU Y L,et al.Combustion characteristics of paraffin-polyethylene blends fuel for solid fuel ramjet[J]. Journal of Aerospace Engineering,2020, 33(4):78-90. [12] 崔立堃,杜明明,叶伟.固冲发动机补燃室化学非平衡流数值模拟[J].兵器装备工程学报,2021,42(1):157-160, 173. CUI L K,DU M M,YE W. Numerical simulation for chemical non-equilibrium flow in combustion chamber of SDR[J]. Journal of Ordnance Equipment Engineering, 2021, 42(1): 157-160,173. (in Chinese) [13] KING M K. Boron ignition and combustion in air-augmented rocket afterburner[J]. Combustion Science and Technology, 1972,5(1):155-164. [14] KING M K. Boron particle ignition in hot gas streams[J]. Combustion Science and Technology,1974,8(5/6):255-273. [15] KING M K. Ignition and combustion of boron particles and clouds[J]. Journal of Spacecraft,1982,19(4):294-306. [16] 胡建新.含硼推进剂固体火箭冲压发动机补燃室工作过程研究[D].长沙:国防科学技术大学,2006. HU J X.Research on the secondary combustion chamber operation process of boron-based propellant ducted rockets[D].Changsha:National University of Defense Technology,2006. (in Chinese) [17] 周俊虎,刘建忠,张彦威,等. 硼的点火和燃烧[M]. 北京: 科学出版社,2015: 9-11. ZHOU J H,LIU J Z,ZHANG Y W,et al. Ignition and combustion of boron[M]. Beijing: Science Press,2015: 9-11. (in Chinese) [18] HASHIM S A,KARMAKAR S,ROY A.Combustion characteristics of boron-HTPB-based solid fuels for hybrid gas generator in ducted rocket applications[J].Combustion Science and Technology,2019,191(11):2082-2100. [19] 方传波.固体火箭冲压发动机内硼颗粒着火燃烧过程研究[D].长沙:国防科学技术大学,2014. FANG C B. Study of ignition and combustion process of boron particles in ducted rockets[D].Changsha:National University of Defense Technology,2014. (in Chinese) [20] KURTH G,BAUER C,MEYER T,et al. Development and testing of a C/SiC combustion chamber for high speed throttleable ducted rocket applications[C]∥Proceedings of the 51st AIAA/SAE/ASEE Joint Propulsion Conference. Orlando,FL, US:AIAA,2015. [21] 田凌寒,张强,李逢舟.碳化硅陶瓷基复合材料在固冲发动机上的应用[J] 弹箭与制导学报,2020,40(5):72-75. TIAN L H,ZHANG Q,LI F Z. Application of silicon carbide based composite in solid propellant ramjet[J]. Journal of Projectiles,Rockets,Missiles and Guidance,2020,40(5):72-75. (in Chinese) [22] 查柏林,石易昂,王金金,等. 固体火箭冲压发动机补燃室绝热层烧蚀试验方法[J].航空动力学报,2018, 33(4):936-943. ZHA B L,SHI Y A,WANG J J,et al. Ablation experimental method for insulation of secondary combustion chamber in solid ducted rocket[J]. Journal of Aerospace Power,2018,33(4):936-943. (in Chinese)