[1] 索文超, 毕小平, 吕良栋. 履带车辆百叶窗空气流动模拟及结构优化[J]. 兵工学报, 2010, 31(7):887-891. SUO W C, BI X P, L L D. Numerical simulation of airflow and structure optimization for shutters of tracked vehicles [J]. Acta Armamentarii, 2010, 31(7):887-891. (in Chinese)
[2] 殷明, 毕小平, 周国印, 等. 基于CFD与近似模型的坦克百叶窗优化方法[J]. 装甲兵工程学院学报, 2011, 25(5):25-28. YIN M, BI X P, ZHOU G Y, et al. Optimization method for shutter of tank based on CFD and approximate model[J]. Journal of Academy of Armored Force Engineering, 2011, 25(5):25-28. (in Chinese) [3] 李云龙, 赵长禄, 张付军,等. 装甲车辆进排气格栅的气动特性试验研究与防护性能分析[J]. 兵工学报, 2012, 33(2):129-133. LI Y L, ZHAO C L, ZHANG F J, et al. Aerodynamic characteristics experimental study and protective performance analysis for intake and vent grilles of armored vehicles[J]. Acta Armamentarii, 2012, 33(2):129-133. (in Chinese) [4] 毛航, 王珂, 王永庆,等. 基于响应面分析法的百叶窗翅片结构优化设计[J]. 化工设备与管道, 2015, 52(1):23-27. MAO H, WANG K, WANG Y Q, et al. Optimum design of louvered fin structure based on response surface methodology [J]. Process Equipment & Piping, 2015, 52(1):23-27. (in Chinese) [5] 张银亮, 蔡惠坤, 沈超. 工程机械百叶窗翅片式散热器的多目标优化设计[J]. 中国工程机械学报, 2016, 14(6): 508-514. ZHANG Y L, CAI H K, SHEN C.Multi-objective optimization for engineering machinery radiator with louvered fins [J]. Chinese Journal of Construction Machinery, 2016, 14(6): 508-514. (in Chinese) [6] 喻虎. 基于流动与传热分析的装甲车辆动力舱冷却风道优化研究[D].北京: 装甲兵工程学院, 2013. YU H. Optimization of cooling air duct for armored vehicle power cabin based on flow and heat transfer analysis [D]. Beijing: Academy of Armored Forces Engineering,2013. (in Chinese) [7] 陆荣, 袁建平, 李彦军,等. 基于神经网络模型和CFD的轴流泵自动优化[J]. 排灌机械工程学报, 2017, 35(6): 481-487. LU R, YUAN J P, LI Y J, et al. Automatic optimization of axial flow pump based on radial basis functions neural network and CFD [J]. Journal of Drainage and Irrigation Machinery Engineering,2017,35(6): 481-487. (in Chinese) [8] 王钦龙, 王红岩, 芮强. 基于多目标遗传算法的高速履带车辆动力学模型参数修正研究[J]. 兵工学报, 2016, 37(6): 969-978. WANG Q L, WANG H Y, RUI Q. Research on parameter updating of high mobility tracked vehicle dynamic model based on multi-objective genetic algorithm[J]. Acta Armamentarii, 2016, 37(6):969-978. (in Chinese) [9] 骆清国, 尹洪涛, 刘红彬,等. 基于遗传算法的风扇蜗壳结构优化研究[J]. 中国工程机械学报, 2016, 14(4): 305-309. LUO Q G, YIN H T, LIU H B, et al. Genetic-algorithm-based optimization on fan volute structure[J]. Chinese Journal of Construction Machinery, 2016, 14(4): 305-309. (in Chinese) [10] 李剑锋, 李国平, 路波,等. 旋涡流非接触气爪结构优化设计[J]. 中国机械工程, 2018, 29(5):519-525. LI J F, LI G F, LU B, et al. Optimal design of vortex flow non-contact pneumatic gripper structures[J]. China Mechanical Engineering, 2018, 29(5):519-525. (in Chinese)
[11] 陈小雄. 基于遗传算法的汽车外形优化[D]. 重庆:重庆理工大学, 2016. CHEN X X. Automobile shape optimization based on genetic algorithm[D]. Chongqing: Chongqing University of Technology,2016. (in Chinese)
[12] 段孟华. 某柴油发动机缸内流场和燃烧的数值模拟分析[D]. 重庆:重庆理工大学, 2016. DUAN M H. Numerical simulation of flow field and combustion in a diesel engine cylinder[D]. Chongqing: Chongqing University of Technology,2016. (in Chinese)
[13] 刘静乐.基于EDA和人工免疫系统的混合多目标优化算法[D].西安:西安电子科技大学,2012. LIU J L. Hybrid multi-objective optimizations based on EDA and AIS[D]. Xi'an: Xidian University,2012. (in Chinese)
[14] 秦仙蓉, 潘杰, 徐俭,等. 塔式起重机结构有限元模型修正的响应面方法[J]. 振动与冲击, 2018, 37(6):244-250. QIN X R, PAN J, XU J, et al. Response surface method for the structural finite element model updating of tower cranes[J]. Journal of Vibration and Shock, 2018, 37(6):244-250. (in Chinese)
第40卷 第4期2019 年4月兵工学报ACTA ARMAMENTARIIVol.40No.4Apr.2019
|