[1] Lloyd F A. Parameters contributing to power loss in disengaged wet clutches[C]∥SAE International Off-Highway and Powerplant Congress and Exposition.Warrendale, PA, US: Society of Automotive Engineers,1974:740694. [2] Kato Y, Murasugi T, Hirano H, et al. Fuel economy improvement through tribological analysis of the wet clutches and brakes of an automatic transmission[C]∥Proceedings of JSAE convention proceedings. Tokyo,Japan:Society of Automotive Engineers of Japan,1993:57-60. [3] Hashimoto H, Wada S, Murayama Y. The performance of a turbulent-lubricated sliding bearing subject to centrifugal effect[J].Transactions of the Japan Society of Mechanical Engineers Series C, 1984, 49(446):1753-1761. [4] Yuan Y, Liu E A, Hill J, et al. An improved hydrodynamic model for open wet transmission clutches[J].ASME Journal of Fluids Engineering, 2007, 129(3): 333-337. [5] Walker P D, Zhang N, Tamba R, et al. Simulations of drag torque affecting synchronisers in a dual clutch transmission[J]. Japan Journal of Industrial and Applied Mathematics, 2011, 28(1): 119-140. [6] 马彪. 履带车辆综合传动特性的动态仿真研究[D]. 北京: 北京理工大学, 1999. MA Biao. Study on the dynamic simulation of integrated transmission characteristics of tracked vehicles[D]. Beijing: Beijing Institute of Technology, 1999.(in Chinese) [7] 张志刚,周晓军,李永军,等. 湿式多片换档离合器带排转矩的预测模型[J]. 浙江大学学报:工学版,2011,45(4):708-713. ZHANG Zhi-gang, ZHOU Xiao-jun, LI Yong-jun,et al. Drag torque prediction model of wet multi-disk shifting clutch[J]. Journal of Zhejiang University:Engineering Science, 2011, 45(4): 708-713. (in Chinese) [8] Yuan S H, Peng Z X, Jing C. Experimental research and mathematical model of drag torque in single-plate wet clutch[J]. Chinese Journal of Mechanical Engineering, 2011, 24(1):91-97. [9] 项昌乐,章颖莹,刘辉. 高转速差车用湿式离合器带排转矩特性研究[J]. 机械工程学报,2013,49(20):71-77. XIANG Chang-le, ZHANG Ying-ying, LIU Hui. Research on drag torque of high relative speed open wet clutch of vehicle[J]. Journal of Mechanical Engineering, 2013, 49(20): 71-77.(in Chinese)
[10] 杨立昆,李和言,马彪.改进的湿式离合器带排转矩模型[J].吉林大学学报:工学版,2014,44(5):1270-1275. YANG Li-kun, LI He-yan, MA Biao. Improved drag torque model for wet clutch[J]. Journal of Jilin University:Engineering and Technology Edition,2014,44(5): 1270-1275. (in Chinese) [11] 景琦. 湿式换挡离合器带排损失特性研究[D]. 北京: 北京理工大学, 2012. JING Qi. Study on the drag loss characteristic of wet shifting clutch[D]. Beijing: Beijing Institute of Technology, 2012. (in Chinese) [12] 刘继凯,马彪,李和言. 摩擦片表面沟槽对离合器带排转矩的影响[J]. 华中科技大学学报:自然科学版,2015,43(2): 35-39. LIU Ji-kai, MA Biao, LI He-yan. Influence of surface grooves on friction plate on drag torque of wet clutch[J]. Journal of Huazhong University of Science and Technology:Natural Science Edition,2015,43(2): 35-39. (in Chinese) [13] 张昌芳,刘家福. 抖空竹的力学原理分析[J]. 力学与实践,2006,28(4): 89-92. ZHANG Chang-fang, LIU Jia-fu. Analysis of mechanical principles of shaking diabolo[J]. Mechanics in Engineering, 2006,28(4): 89-92. (in Chinese) [14] Li H Y, Jing Q,Ma B. Modeling and parametric study on drag torque of wet clutch[C]∥ Proceedings of the FISITA 2012 World Automotive Congress. Berlin, Germany:Springer,2013:21-30. [15] 罗灯明,郑长松,侯树梅,等. 湿式换挡离合器全油膜状态下带排损失研究[J]. 汽车技术,2013(4): 30-34. LUO Deng-ming, ZHENG Chang-song, HOU Shu-mei,et al. Research on drag loss of wet shifting clutch under full oil film condition[J]. Automobile Technology,2013(4): 30-34. (in Chinese) [16] 赵二辉,马彪,李和言,等. 转速对湿式离合器局部润滑及摩擦特性影响研究[J]. 兵工学报,2017,38(4): 625-633. ZHAO Er-hui,MA Biao, LI He-yan, et al. Influence of rotating speed on local lubrication and friction characteristics of wet clutch[J]. Acta Armamentarii, 2017,38(4): 625-633. (in Chinese) [17] Hu J B, Peng Z X,Yuan S H. Drag torque prediction model for the wet clutches[J]. Chinese Journal of Mechanical Engineering,2009,22(2): 238-243.
第39卷 第9期2018 年9月兵工学报ACTA ARMAMENTARIIVol.39No.9Sep.2018
|