[1] 关锐, 高永军. AP 1000反应堆主泵屏蔽套制造工艺浅析[J]. 中国核电, 2008, 1(1): 49-53. GUAN Rui, GAO Yong-jun. Brief analysis on fabtrication process of AP1000 reactor coolant pump can[J]. China Nuclear Power, 2008, 1(1):49-53.(in Chinese) [2] RadoviAc'G2 L, NikaAcˇG2eviAc'G2 M, JordoviAc'G2 B. Deformation behaviour and microstructure evolution of AlMg6Mn alloy during shear spinning[J]. Transactions of Nonferrous Metals Society of China, 2012, 22(5):991-1000. [3] 薛克敏, 李萍, 吕炎, 等. 筒形件强旋工艺参数对金属切向流动的影响[J]. 哈尔滨工业大学学报, 2001, 33(1):86-88. XUE Ke-min, LI Ping, LYU Yan, et al. Influence of process parameters on tangential strain in tube spinning[J]. Journal of Harbin Institute of Technology, 2001, 33(1):86-88. (in Chinese) [4] 于辉, 刘帅帅, 王秀琳, 等. 小口径薄壁筒形件变薄旋压工艺及实验[J]. 塑性工程学报, 2015, 22(4):84-87. YU Hui, LIU Shuai-shuai, WANG Xiu-lin, et al. Power spinning process and experiment research for small diameter thin-walled cylindrical workpiece[J]. Journal of Plasticity Engineering, 2015, 22(4):84-87. (in Chinese) [5] 赵云豪. 高温合金旋压塑性变形稳定性试验研究[J]. 锻压技术, 2003, 28(5):47-50. ZHAO Yun-hao. Research on spinning deformation stability of high temperature alloy[J]. Forging & Stamping Technology, 2003, 28(5):47-50. (in Chinese) [6] 梅瑛, 李瑞琴, 张晨爱, 等. 筒形件强力反旋的数值模拟及旋压力分析[J]. 机械设计与研究, 2007, 23(4):65-68. MEI Ying, LI Rui-qin, ZHANG Chen-ai, et al. Numerical simulation and spinning force analysis on backward spinning of tube[J]. Machine Design and Research, 2007, 23(4):65-68. (in Chinese) [7] Ma F, Yang H, Zhan M. Plastic deformation behaviors and their application in power spinning process of conical parts with transverse inner rib[J]. Journal of Materials Processing Technology, 2010, 210(1):180-189. [8] Prakash R, Singhal R P. Shear spinning technology for manufacture of long thin wall tubes of small bore[J]. Journal of Materials Processing Technology, 1995, 54(1/2/3/4): 186-192. [9] 赵云豪, 张顺福. 国内旋压技术发展的回顾与展望[C]∥全国锻压学术年会论文集. 北京:有色金属研究总院, 1999:419-421. ZHAO Yun-hao, ZHANG Shun-fu. A review and prospect: deve-lopment of spinning technology in China[C]∥Proceedings of National Academic Conference on Forging and Pressing. Beijing: General Research Institute for Nonferrous Metals, 1999:419-421. (in Chinese)
[10] Davidson M J, Balasubramanian K, Tagore G R N. An experimental study on the quality of flow-formed AA6061 tubes[J]. Journal of Materials Processing Technology, 2008, 203(1):321-325. [11] Mobebbi M S, Akbarzadeb A. Experimental study and FEM analysis of redundant strains in flow forming of tubes[J]. Journal of Materials Processing Technology, 2010, 210(2):389-395. [12] 李新和, 刘燕平, 严岳胜, 等. 大径厚比超薄壁筒形件变薄旋压鼓形[J]. 塑性工程学报, 2012, 19(3):64-70. LI Xin-he, LIU Yan-ping, YAN Yue-sheng, et al. Analysis on bulging during flow forming of tube with ultra thin-wall and large diameter/thickness ratio[J]. Journal of Plasticity Engineering, 2012, 19(3):64-70. (in Chinese) [13] 张坦, 李新和, 魏准, 等. 工艺参数对大径厚比薄壁筒形件旋压成形质量的影响研究[J]. 塑性工程学报, 2017, 24(2): 75-81. ZHANG Tan, LI Xin-he, WEI Zhun, et al. Influence of process parameters on the flow forming quality of thin-walled tube with large diameter-thickness ratio[J]. Journal of Plasticity Engineering, 2017, 24(2):75-81. (in Chinese) [14] 魏准, 李新和, 张坦, 等. 薄壁筒减薄旋压成形的扩口现象研究[J]. 锻压技术, 2016, 41(12):137-142. WEI Zhun, LI Xin-he, ZHANG Tan, et al. Research on thinning spinning flaring for thin-walled tube[J]. Forging & Stamping Technology, 2016, 41(12):137-142. (in Chinese) [15] Hua F A, Yang Y S, Zhang Y N, et al. Three-dimensional finite element analysis of tube spinning[J]. Journal of Materials Processing Technology, 2005, 168(1):68-74. [16] Ma F, Yang H, Zhan M. Effects of material properties on power spinning process of parts with transverse inner rib[J]. Transactions of Nonferrous Metals Society of China, 2010, 20(8): 1476-1481. [17] 苗培壮, 朱小兵, 胡成亮, 等. 薄壁筒形件强力旋压有限元建模及优化分析[J]. 锻压技术, 2014, 39(9):137-142. MIAO Pei-zhuang, ZHU Xiao-bing, HU Cheng-liang, et al. Finite element modeling and optimization analysis on power spinning of the thin-wall cylinder[J]. Forging & Stamping Technology, 2014, 39(9):137-142. (in Chinese) [18] Wang J, Ting G E, Lu G D, et al. A study of 3D finite element modeling method for stagger spinning of thin-walled tube[J]. Journal of Zhejiang University-Science A:Applied Physics & Engineering, 2016, 17(8):646-666.
第39卷 第10期2018 年10月兵工学报ACTA ARMAMENTARIIVol.39No.10Oct.2018
|