Joint Survey Design and Test of Common Optical Path of Hyperspectral Lidar

doi:10.3969/j.issn.1000-1093.2016.11.006

Abstract

Abstract: In order to accurately detect the distances, orientations and spectral properties of air, ground and underwater targets, the measuring principle and calculation model of common optical path of higyperspectral lidar are discussed, and a principle prototype design method is proposed. The detection test of common optical path of higyperspectral lidar is carried out. The synthetic data of hyperspectrum and lidar are generated, each point contains the scanner coordinate information and spectral information. By comparing the data before and after synthesis, the camouflaged targets can be identified, and the targets can be also accurately located. The experimental results show that the measuring method for common optical path of hyperspectral lidar is feasible.

Key words: ordnance science and technology, hyperspectral imaging, laser scanning data, synchronous joint survey, design and test

CLC Number:

TN958.98

FU Cheng-qun，FANG Liang，XIE Li-jun，WANG Yong. Joint Survey Design and Test of Common Optical Path of Hyperspectral Lidar[J]. Acta Armamentarii, 2016, 37(11): 2002-2009.

References

［1］葛宪莹. 用于高精度微弱信号探测激光雷达的光机系统设计及优化[D]. 北京:北京理工大学, 2014.
GE Xian-ying. Design and optimization of opto-mechanical structure for high accuracy weak signal detection lidar [D]. Beijing: Beijing Institute of Technology, 2014. (in Chinese)
[2］ Rieger P, Ullrich A. Resolving range ambiguities in high-repetition rate airborne light detection and ranging applications[J]. Journal of Applied Remote Sensing, 2012, 6(1): 635-652.
[3］童庆禧, 薛永祺, 王晋年, 等. 地面成像光谱辐射测量系统及其应用[J]. 遥感学报, 2010, 14(3):409-422.
TONG Qin-xi, XUE Yong-qi, WANG Jin-nian, et al. Development and application of the field imaging spectrometer system[J]. Journal of Remote Sensing, 2010, 14(3):409-422. (in Chinese)
[4］ Prieto-Blanco X, Montero-Orille C, González-Nuez H, et al. The Offner imaging spectrometer in quadrature[J]. Optics Express, 2010, 18(12): 12756-12769.
[5］闫兴涛, 杨建峰, 薛彬, 等. Offner型成像光谱仪前置光学系统设计[J]. 红外与激光工程, 2013, 42(10): 2712-2717.
YAN Xing-tao, YANG Jian-feng, XUE Bin, et al. Design of fore telescope system for Offner imaging spectrometer[J]. Infrared and Laser Engineering, 2013, 42(10): 2712-2717.(in Chinese)
[6］薛庆生, 林冠宇, 宋克非. 星载大视场短波红外成像光谱仪光学设计[J]. 光子学报, 2011, 40(5): 673-678.
XUE Qing-sheng, LIN Guang-yu, SONG Ke-fei. Optical design of space borne shortwave infrared imaging spectrometer with wide field of view[J]. Acta Photonica Sinica, 2011, 40(5):673-678. (in Chinese)
[7］计忠瑛, 相里斌, 崔燕. 超光谱成像仪的实验室定标[J]. 航天器工程, 2010, 19(1):67-71.
JI Zhong-ying, XIANG Li-bin, CUI Yan. Labsphere calibration of hyperspectral imaging spectrometer[J]. Spacecraft Engineering, 2010, 19(1):67-71. (in Chinese)
[8］裴舒. 成像光谱仪光谱定标[J]. 光机电信息， 2011, 28(11):48-51.
PEI Shu. Spectral calibration of imaging spectrometer[J]. OME Information, 2011, 28(11):48-51.(in Chinese)
[9］罗磊，陈恳，马振书，等. 基于虚拟连杆机构的类圆柱体目标位姿获取[J]. 兵工学报, 2014, 35(6): 885-890.
LUO Lei, CHEN Ken, MA Zhen-shu,et al. Position and pose measurement of cylinder-like object based on virtual pole mechanism[J]. Acta Armamentarii, 2014, 35(6): 885-890. (in Chinese)
[10］高静, 计忠瑛, 崔燕, 等. 空间调制干涉光谱成像仪的室外定标技术研究[J]. 光学学报. 2010, 30(5):1321-1326.
GAO Jing, JI Zhong-ying, CUI Yan, et al. Outfield calibration analysis of spatially modulated imaging Fourier transform spectrometer[J]. Acta Optica Sinica, 2010, 30(5):1321-1326. (in Chinese)
[11］魏儒义. 时间调制傅里叶变换红外光谱成像技术与应用研究[D]. 北京:中国科学院大学, 2013.
WEI Ru-yi. Study on time-resolved Fourier transform infrared spectral imaging technology and its applications[D]. Beijing: University of Chinese Academy of Sciences, 2013.(in Chinese)
[12］周磊, 彭妮娜, 张黎明, 等. 基于标准探测器的 FY-2(05) 星扫描辐射计可见通道外场定标[J]. 遥感技术与应用, 2007, 22(1):20-25.
ZHOU Lei, PENG Ni-na, ZHANG Li-ming, et al. Detector based field radiometric calibration for the visible band of multi-channel scanning radiometer of satellite FY-2-05[J]. Remote Sensing Technology and Application, 2007, 22(1):20-25.(in Chinese)
[13］刘磊. 机载LIDAR系统误差分析与检校方法研究[D]. 济南:山东科技大学, 2011.
LIU Lei. Analysis of error and calibration methods of airborne lidar system[D]. Jinan: Shandong University of Science and Technology, 2011.(in Chinese)
[14］许凯达,金伟其,刘敬,等. 基于激光距离选通的非视域成像特性分析[J]. 兵工学报, 2014, 35(12): 2003-2009.
XU Kai-da, JIN Wei-qi, LIU Jing, et al. Analysis of non-line-of-sight imaging characteristics based on laser range-gated imaging[J]. Acta Armamentarii, 2014, 35(12): 2003-2009. (in Chinese)
[15］ Hase F, Wallace L, Mcleod S, et al. The ACE-FTS atlas of the infrared solar spectrum[J］.Journal of Quantitative Spectroscopy and Radiative Transfer, 2010, 111(4): 521-528.
[16］ August T, Klaes D, Schlussel P, et al. IASI on Metop-A:operational level 2 retrievals after five years in orbit[J]. Journal of Quantitative Spectroscopy and Radiative Transfer, 2012, 113(11): 1340-1371.

[1]	MAO Ming, WANG Jian-bing. Research on Influence of Breakwater on Hydrodynamic Characterisitics of Displacement Amphibious Vehicles [J]. Acta Armamentarii, 2016, 37(9): 1553-1560.
[2]	GAO Jun-qiang, TANG Xia-qing, HUANG Xiang-yuan, CHENG Xu-wei. FEA Method for Analysis of SINS Error Caused by Vibration Isolation System [J]. Acta Armamentarii, 2016, 37(9): 1570-1577.
[3]	NI Yan-jie， CHENG Nian-kai, JIN Yong， YANG Chun-xia， LI Hai-yuan， LI Bao-ming. Numerical Simulation on Pressure Wave in a 30mm Electrothermal-chemical Gun [J]. Acta Armamentarii, 2016, 37(9): 1578-1584.
[4]	LU Ye, ZHOU Ke-dong, HE Lei, LI Jun-song, HUANG Xue-ying. Research on Influence of Muzzle Brake Efficiency on a New Large Caliber Machine Gun Based on Floating Principle [J]. Acta Armamentarii, 2016, 37(9): 1585-1591.
[5]	LIU Guo-qing， XU Cheng. The Study of Bullet-Barrel Matching Design Method of High Precision Sniper Rifle [J]. Acta Armamentarii, 2016, 37(9): 1592-1598.
[6]	LI Zhen-xiao， ZHANG Ya-zhou， NI Yan-Jie， LI Bao-ming. Analysis on the Influence of Turn-off Characteristics of Thyristor on Augmented Railgun [J]. Acta Armamentarii, 2016, 37(9): 1599-1605.
[7]	HU Ming, WANG Jiong, WU Xiao-lang. Estimation Method for Storage Life of Magnetorheological Fluid Fuze Arming Device [J]. Acta Armamentarii, 2016, 37(9): 1606-1611.
[8]	ZHOU Peng， CAO Cong-yong， DONG Hao. Analysis of Interior Ballistic Characteristics and Muzzle Flow Field of High-pressure Gas Launcher [J]. Acta Armamentarii, 2016, 37(9): 1612-1616.
[9]	ZHAO Xue-wei， YU Yong-gang， MANG Shan-shan. Influence of Injection Pressure Change on Expansion Characteristics of Pulsed Plasma Jet [J]. Acta Armamentarii, 2016, 37(9): 1617-1623.
[10]	LIN Xiang-yang, LI Han, ZHENG Wen-fang, PAN Ren-ming. Formation Mechanism of Pore Structure of Ball Propellant with Micro-pores Made by Double Emulsion Method [J]. Acta Armamentarii, 2016, 37(9): 1633-1638.
[11]	CUI Yun-xiao, CHEN Peng-wan, David A. Cendón, DAI Kai-da, ZHONG Fang-ping. Numerical Simulation of Dynamic Brazilian Test of Polymer Bonded Explosive Simulant Based on Cohesive Crack Model [J]. Acta Armamentarii, 2016, 37(9): 1639-1645.
[12]	CAO Hao-zhe， WU Yan-xuan， ZHOU Feng， WANG Zheng-jie. Research on Containment Control of Second-order Nonlinear Multi-agent with Collision Avoidance Mechanism [J]. Acta Armamentarii, 2016, 37(9): 1646-1654.
[13]	LOU Li, FAN Jian-hua, XU Cheng. Research on Topologically Optimized Anti-jamming Technology for Tactical MANETs [J]. Acta Armamentarii, 2016, 37(9): 1662-1669.
[14]	LIU Wei-dong, CHENG Rui-feng, GAO Li-e, ZHANG Jian-jun. Cooperative Engagement-based Differential Guidance Law for Underwater Interceptor [J]. Acta Armamentarii, 2016, 37(9): 1684-1691.
[15]	DAI Yong, QIAN Lin-fang, WU Xiao-jin, XU Ya-dong. Analysis about Thermal-structure Coupling Effect of High Firing Rate Automatic Mechanism of a Gun [J]. Acta Armamentarii, 2016, 37(9): 1738-1743.