Research on Test Methods for Special Vehicle Handling and Stability Based on Dynamics Simulation

doi:10.3969/j.issn.1000-1093.2014.02.019

Abstract

Abstract: In order to study and lay down the test methods of special vehicle handling performance and stability, the test method of special vehicle handling and stability is set up by considering the characteristics of special vehicle on the basis of the test methods in GB and ISO. The key parameters of vehicle handling and stability test are determined and analyzed through special vehicle dynamics modeling, handling and stability simulation, data processing and score evaluation. Based on this method, the test of sample vehicle is completed. The test results show that the test method is feasible, and meets the test and scoring evaluation requirements of special vehicle handling and stability.

Key words: ordnance science and technology, special vehicle, handling and stability, dynamics simulation, test method

CLC Number:

LI Jun， YUAN Shi-hua， JU Dong-mei， LI Rui-ying. Research on Test Methods for Special Vehicle Handling and Stability Based on Dynamics Simulation[J]. Acta Armamentarii, 2014, 35(2): 262-267.

References

［1］杜志岐.轮式装甲车总体设计的概念、思路与特点[J]. 兵工学报, 1999, 20(11): 351-356.
DU Zhi-qi. Wheeled armored vehicle and some of its design aspects[J]. Acta Armamentarii, 1999, 20(11):351-356. (in Chinese)
[2］余志生.汽车理论[M].北京:机械工业出版社, 2011.
YU Zhi-sheng. Theory of automobile[M].Beijing: China Machine Press, 2011. (in Chinese)
[3］佐野彭一.操纵稳定性的评价[J].自动车技术, 1980, 34(3)：211-219.
ZUO-YE Peng-yi.Evaluation of vehicle handling[J]. Journal of Society of Automotive Engineers of Japan, 1980, 34(3)：211-219. (in Japanese)
[4］李军,邢俊文, 覃文浩，等.ADAMS实例教程[M].北京：北京理工大学出版社, 2002.
LI Jun, XING Jun-wen, QIN Wen-hao, et al.ADAMS living example course[M].Beijing: Beijing Institute of Technology Press, 2002. (in Chinese)
[5］孟红, 项昌乐, 孙旭光, 等. 轮式装甲车辆不同差速器方案操纵稳定性仿真研究[J]. 兵工学报, 2009, 30(3): 262-267.
MENG Hong, XIANG Chang-le, SUN Xu-guang, et al. Simulation research on wheeled armored vehicle operating stability in differentialmechanism schemes[J]. Acta Armamentarii, 2009, 30(3): 262-267. (in Chinese)
[6］郭孔辉, 潘峰, 马凤军. 预瞄优化神经网络驾驶员模型[J]. 机械工程学报, 2003, 39(1):26-29.
GUO Kong-hui, PAN Feng, MA Feng-jun. Preview optimized artificial neural network driver model[J]. Chinese Journal of Mechanical Engineering, 2003, 39(1):26-29.(in Chinese)
[7］ ISO 4138—2012 乘用车·稳态环行驾驶·开环试验方法[S]. 北京: 中国标准出版社, 2012.
ISO 4138—2012 Passenger cars· steady-state circular driving behaviour·open-loop test methods[S]. Beijing: China Standards Press, 2012. (in Chinese)
[8] GB/T 6323.6—1994 汽车操纵稳定性试验方法稳态回转试验[S]. 北京: 中国标准出版社, 1994.
GB/T 6323.6—1994. Controllability and stability test procedure for automobiles—steady static circular test procedure[S]. Beijing:China Standards Press, 1994. (in Chinese)
[9] GB/T 6323.4—1994 汽车操纵稳定性试验方法转向回正性能试验[S]. 北京:中国标准出版社, 1994.
GB/T 6323.4—1994 Controllability and stability test procedure for automobiles—returnability test[S]. Beijing:China Standards Press, 1994. (in Chinese)
[10］ GB/T 6323.5—1994 汽车操纵稳定性试验方法转向轻便性试验[S]. 北京: 中国标准出版社, 1994.
GB/T 6323.5—1994 Controllability and stability test procedure for automobiles—steering efforts test procedure[S]. Beijing:China Standards Press, 1994. (in Chinese)
[11］刘惟信. 汽车设计[M]. 北京: 清华大学出版社, 2006.
LIU Wei-xin. Automobile design[M].Beijing: Tsinghua University Press,2006. (in Chinese)
[12］ GB/T 6323.3—1994 汽车操纵稳定性试验方法转向瞬态响应试验（转向盘角脉冲输入）[S]. 北京:中国标准出版社, 1994.
GB/T 6323.3—1994 Controllability and stability test procedure for automobiles—steering transient response test(steering wheel angle pulse input) [S]. Beijing:China Standards Press, 1994. (in Chinese)
[13］ GB/T 6323.1—1994 汽车操纵稳定性试验方法蛇形试验[S]. 北京:中国标准出版社, 1994.
GB/T 6323.1—1994 Controllability and stability test procedure for automobiles—pylon course slalom test[S]. Beijing:China Standards Press, 1994. (in Chinese)
[14］ QC/T 480—1999 汽车操纵稳定性指标限值与评价方法[S]. 北京:中国标准出版社, 1999.
QC/T 480—1999 Criterion thresholds and evaluation of controllability and stability for autobiles[S]. Beijing:China Standards Press, 1999. (in Chinese)

[1]	LI Zhanlong, ZHANG Zheng, JIANG Wenwen, LIU Qi, REN Zhizhao, WANG Yao, SONG Yong. Dynamic Characteristics of Quasi-Zero Stiffness Vibration Isolation System with Magnetic Rings [J]. Acta Armamentarii, 2023, 44(6): 1784-1794.
[2]	CHEN Jianwei, YU Chuanqiang, LIU Zhihao, TANG Shengjin, ZHANG Zhihao, SHU Hongbin. Data Modeling of Multi-Axle Special Vehicles and Lateral Dynamics Applications [J]. Acta Armamentarii, 2023, 44(1): 165-175.
[3]	NING Keyan, LI Desheng, TIAN Jinshan, GAI Jiangtao, OUYANG Wei, LAN Hai, PANG Huiren. A Review of Matching Technology of Eddy Current Retarder for High Maneuvering Platform [J]. Acta Armamentarii, 2023, 44(1): 1-10.
[4]	MAO Ming, WANG Jian-bing. Research on Influence of Breakwater on Hydrodynamic Characterisitics of Displacement Amphibious Vehicles [J]. Acta Armamentarii, 2016, 37(9): 1553-1560.
[5]	GAO Jun-qiang, TANG Xia-qing, HUANG Xiang-yuan, CHENG Xu-wei. FEA Method for Analysis of SINS Error Caused by Vibration Isolation System [J]. Acta Armamentarii, 2016, 37(9): 1570-1577.
[6]	NI Yan-jie， CHENG Nian-kai, JIN Yong， YANG Chun-xia， LI Hai-yuan， LI Bao-ming. Numerical Simulation on Pressure Wave in a 30mm Electrothermal-chemical Gun [J]. Acta Armamentarii, 2016, 37(9): 1578-1584.
[7]	LU Ye, ZHOU Ke-dong, HE Lei, LI Jun-song, HUANG Xue-ying. Research on Influence of Muzzle Brake Efficiency on a New Large Caliber Machine Gun Based on Floating Principle [J]. Acta Armamentarii, 2016, 37(9): 1585-1591.
[8]	LIU Guo-qing， XU Cheng. The Study of Bullet-Barrel Matching Design Method of High Precision Sniper Rifle [J]. Acta Armamentarii, 2016, 37(9): 1592-1598.
[9]	LI Zhen-xiao， ZHANG Ya-zhou， NI Yan-Jie， LI Bao-ming. Analysis on the Influence of Turn-off Characteristics of Thyristor on Augmented Railgun [J]. Acta Armamentarii, 2016, 37(9): 1599-1605.
[10]	HU Ming, WANG Jiong, WU Xiao-lang. Estimation Method for Storage Life of Magnetorheological Fluid Fuze Arming Device [J]. Acta Armamentarii, 2016, 37(9): 1606-1611.
[11]	ZHOU Peng， CAO Cong-yong， DONG Hao. Analysis of Interior Ballistic Characteristics and Muzzle Flow Field of High-pressure Gas Launcher [J]. Acta Armamentarii, 2016, 37(9): 1612-1616.
[12]	ZHAO Xue-wei， YU Yong-gang， MANG Shan-shan. Influence of Injection Pressure Change on Expansion Characteristics of Pulsed Plasma Jet [J]. Acta Armamentarii, 2016, 37(9): 1617-1623.
[13]	LIN Xiang-yang, LI Han, ZHENG Wen-fang, PAN Ren-ming. Formation Mechanism of Pore Structure of Ball Propellant with Micro-pores Made by Double Emulsion Method [J]. Acta Armamentarii, 2016, 37(9): 1633-1638.
[14]	CUI Yun-xiao, CHEN Peng-wan, David A. Cendón, DAI Kai-da, ZHONG Fang-ping. Numerical Simulation of Dynamic Brazilian Test of Polymer Bonded Explosive Simulant Based on Cohesive Crack Model [J]. Acta Armamentarii, 2016, 37(9): 1639-1645.
[15]	CAO Hao-zhe， WU Yan-xuan， ZHOU Feng， WANG Zheng-jie. Research on Containment Control of Second-order Nonlinear Multi-agent with Collision Avoidance Mechanism [J]. Acta Armamentarii, 2016, 37(9): 1646-1654.