ZHANG Ning, SHI Jinguang, MA Yexuan. Research on Aerodynamic Characteristics of Solid Fuel Ramjet Guided Projectile[J]. Acta Armamentarii, 2020, 41(3): 460-470.
[1] NELSON C W. Trajectory predictions for a 75 mm solid fuel ramjet tubular projectile [J]. Trajectory Predictions for A Mm Solid Fuel Ramjet Tubular Projectile,1981,6(3):256-262. [2] NUSCA M J. Steady flow combustion model for solid-fuel ramjet projectiles[J].Journal of Propulsion and Power, 1989,6(3):348-352. [3] JAMES E D,ASHER S. Evaluation of solid fuel ramjet projectile aerodynamic characteristics[C]∥Proceedings of the 17th International Symposium on Ballistic.Midrand,South Africa: The South African Ballistics Organization,1995: 441-448. [4] CHOI S W,KANG H C,PARK J K,et al. Simultaneous internal/external flow calculation of a solid fuel ramjet projectile:a design analysis[J].KSME International Journal,1998,12(3):479-485. [5] GOLDBERG U,CHAKRAVARTHY S,NUSCA M.A new computational capability for ramjet projectiles[C]∥Proceedings of Applied Aerodynamics Conference.CA,US:Ballistic Research Laboratories,2006:322-328. [6] PETER W,YNGVE N.Initial study of a 40 mm SFRJ projectile[C]∥Proceedings of the 20th International Symposium on Ballistics. Orlando,FL,US: International Ballistics Society,1993:723-733. [7] NUSA M J,CHAKRAVATHY S R,GOLDBERG U C. Computational fluid dynamics capability for the solid-fuel ramjet projectile[J].Journal of Propulsion and Power,1990, 6(3):256-262. [8] OOSTHUIZEN R,DU BUISSON J J, BOCTHA G F. Solid fuel ramjet (SFRJ) propulsion for artillery projectile applications-concept development overview[C]∥Proceedings of the 20th International Symposium on Ballistics. Orlando, FL,US: International Ballistics Society,2001:403-410. [9] STOCKENSTROM A. Numerical model for analysis and specification of a ramjet propelled artillery projectile[C]∥Proceedings of the 19th International Symposium on Ballistics. Interlaken,Switzerland: International Ballistics Society,2001:426-433.
[10] DIONISIO F,STOCKENSTROM A.Aerodynamic wind-tunnel test of a ramjet projectile[C]∥Proceedings of the 19th International Symposium on Ballistics.BE,Switzerland:Vetter Druck AG,2001:529-536. [11] LEE S K,KIM C K,LEE S S.A study on the design and performance analysis of a gun-launched projectile with solid fuel ramjet (SFRJ)[J].Korea Propulsion Engineering Society,2008,12(3): 49-58. [12] KRISHNAN S,GEORGE P,SATHYAN S. Design and control of solid-fuel ramjet for pseudovacuum trajectories [J].Journal of Propulsion and Power,2000,16(5):815-822. [13] AMICHAI O.Performance of solid fuel ramjet guided projectile for USN 5 inch/54 caliber gun system [J]. NASA STI/Recon Technical Report N,1982,82:111-207. [14] 骆晓臣,鞠玉涛,周长省.冲压增程弹丸冷态气动阻力特性分析[J]. 空气动力学学报,2012,30(4):524-527. LUO X C,JU Y T,ZHOU C S.Analysis of cold aerodynamic resistance characteristics of ramjet extended range projectiles [J].Acta Aerodynamica Sinica,2012,30(4): 524-527. (in Chinese) [15] 谭献忠,刘猛,徐琴. 炮弹固冲增程发动机进气道的风洞实验研究[J]. 实验流体力学,2013,27(2):63-67. TAN X Z,LIU M,XU Q. Wind tunnel experimental study on the intake port of gun-clamped extended-range Engine [J]. Journal of Experimental Fluid Mechanics,2013,27(2): 63-67. (in Chinese) [16] 李理,刘巍,杨涛.冲压增程弹进气道设计方法与性能分析[J]. 国防科技大学学报,2008,30(6):1-5. LI L,LIU W,YANG T.Inlet design and performance calculation for ramjet assisted projectile[J].Journal of National University of Defense Technology,2008,30(6):1-5.(in Chinese) [17] 王健,李宏东,朱守梅,等.冲压发动机用轴对称进气道设计和试验[J].推进技术,2009,30(6):682-685. WANG J,LI H D,ZHU S M,et al.Design and experiment of axisymmetric inlet port for ramjet engine [J].Journal of Propulsion Technology,2009,30(6):682-685. (in Chinese) [18] 陈雄,周长省,郑亚.应用TTM网格研究冲压增程弹丸进气道内外流场[J]. 固体火箭技术,2004,27(4):243-246. CHEN X,ZHOU C S,ZHENG Y. Application of TTM grids on the research of inlet complex flow of ramjet assisted range projectile[J].Journal of Solid Rocket Technology,2004,27(4): 243-246. (in Chinese) [19] 陈雄,朱福亚,鞠玉涛.高速旋转冲压增程弹用进气道复杂流场数值模拟[J].固体火箭技术,2006,29(4):244-246. CHEN X,ZHU F Y,JU Y T.Numerical simulation of complex flow field in inlet port of high speed rotating ramjet extended range projectile [J]. Journal of Solid Rocket Technology,2006,29(4):244-246. (in Chinese) [20] 鞠玉涛,周长省,朱福亚. 冲压发动机增程榴弹绕流流场数值分析[J]. 兵工学报,2006,27(2):219-221. JU Y T,ZHOU C S,ZHU F Y. Numerical analysis of flow field around the extended gravity of ramjet engine [J]. Acta Armamentarii,2006,27(2): 219-221. (in Chinese) [21] 王刚,刘毅,王光秋.采用γ-Reθt模型的转捩流动计算分析[J]. 航空学报,2014,35(1):70-79. WANG G,LIU Y,WANG G Q.Calculation and analysis of switching flow using γ-Reθt model[J].Acta Aeronautica et Astonautica Sinica,2014,35(1):70-79. (in Chinese) [22] 谷萌,李海旺,程健. γ-Reθt转捩模型在微通道流动特性研究中的应用[J].航空动力学报,2018,33(12):2847-2850. GU M,LI H W,CHENG J.Application of γ-Reθt transition model in the study of microchannel flow characteristics[J].Journal of Aerospace Power,2018,33(12):2847-2850. (in Chinese) [23] 杜磊,宁方飞.基于S-A湍流模型和间歇因子输运方程的转捩流数值模拟[J].航空动力学报,2015,30(10):2450-2461. DU L,NING F F.Numerical simulation of turbulent flow based on S-A turbulence model and intermittent factor transport equation[J].Journal of Aerospace Power,2015,30(10):2450-2461.(in Chinese) [24] 陈立立,郭正.不同湍流模型在低雷诺数流动中的应用研究[J]. 现代应用物理,2016,7(3):48-52. CHEN L L,GUO Z.Application of different turbulence models in low reynolds number flow[J]. Journal of Modern Applied Physics,2016,7(3):48-52.(in Chinese) [25] 史金光,王中原,易文俊,等.滑翔增程弹弹道特性分析[J].兵工学报,2006,27(2):210-214. SHI J G,WANG Z Y,YI W J,et al. Analysis on the ballistic characteristics of gliding extended range projectile [J].Acta Armamentarii,2006,27(2):210-214.(in Chinese) [26] 王卫星,郭荣伟.基于边界层转捩的高超声速进气道特性研究[J].航空学报,2012,33(10):1772-1780. WANG W X,GUO R W.Simulations analysis on aerodynamic characteristics of a high-speed ramjet propelled projectile [J]. Acta Aeronautica et Astronautica Sinica,2012,33(10):1772-1780. (in Chinese) [27] 骆晓臣,鞠玉涛,周长省.高速冲压推进弹丸气动特性仿真分析[J]. 空气动力学学报,2013,31(4):482-486. LUO X C,JU Y T,ZHOU C S. Simulation analysis on aerodynamic characteristics of high speed ramjet propelled projectile [J].Acta Aerodynamica Sinica,2013,31(4): 482-486. (in Chinese) [28] 罗金玲,周丹,康宏琳,等.典型气动问题试验方法研究的综述[J].空气动力学学报,2014,32(5):600-609. LUO J L,ZHOU D,KANG H L,et al. A review of typical aerodynamic test methods[J].Acta Aerodynamica Sinica,2014,32(5): 600-609. (in Chinese)