Research on Recoil Law of Bolt-fastened Railgun

doi:10.3969/j.issn.1000-1093.2019.06.021

Abstract

Abstract: The two parallel rails of railgun are subjected to lateral tension during launching. A bolt-fastened encapsulation structure was adopted to restrain the expansion of the rails. For the sake of research on recoil law of bolt-fastened railgun, a launch system model is established, the force acting on the recoils in launching process is analyzed, and a differential equation of recoil and counterrecoil motion is established. For two kinds of counterrecoil mechanison schemes, the recoil of bolt-fastened railgun was simulated and tested. The simulated and experimental results were compared and analyzed. It is concluded that, compared with the conventional gun, the bolt-fastened railgun has the characteristics of short recoil stroke and low recoil velocity, and because of the low recoil velocity, the throttling bar recoil brake used in bolt-fastened railgun needs a smaller flow hole area to improve the recoil force. Key

Key words: railgun, boltfastening, counterrecoilmechanism, recoillaw

CLC Number:

TJ866

MA Xinke, QIU Qunxian, HE Hang, GAO Bo, GENG Hao, HE Xuguang. Research on Recoil Law of Bolt-fastened Railgun[J]. Acta Armamentarii, 2019, 40(6): 1297-1303.

References

［1］ LI J, CAO R G, LI S Z. The development of EML technology in China［J］. IEEE Transactions on Magnetics, 2013, 41(5):1029-1033.
［2］ FAIR H D . Advances in electromagnetic launch science and technology and its applications［J］. IEEE Transactions on Magnetics, 2009, 45(1):225-230.
［3］ MCNAB I R, BEACH F C. Naval railguns［J］. IEEE Transactions on Magnetics, 2007, 43(1):463-468.
［4］理查德·埃斯特里·马歇尔, 王莹. 电磁轨道炮的科学与技术［M］. 曹延杰, 译. 北京:兵器工业出版社, 2006:23-45.
Marshall R A, WANG Y. Electromagnetic gun science and technology［M］. CAO Y J, translated. Beijing: Publishing House of Ordnance Industry, 2006:23-45. （in Chinese）

［5］杜均福. 电磁轨道炮的物理原理［J］. 现代物理知识, 2014, 26(4):64-67.
DU J F. The physical principle of electromagnetic rail-gun［J］. Modern Physics, 2014, 26(4):64-67. (in Chinese)
［6］ TZENG J T. Structural mechanics for electromagnetic railguns［J］. IEEE Transactions on Magnetics, 2005, 41(1): 246-249.
［7］ TAO L, GU G, ZHAO X, et al. Optimization design for rail structure of railgun［J］. IEEE Transactions on Magnetics, 2012, 32(2): 686-689.
［8］ HILMAR P, FRANCIS J, VOLKER W. Technical aspects of railguns ［J］. IEEE Transactions on Magnetics, 1995, 31(1):328-353.
［9］ PRICE J H, FAHRENTHOLD E P, FULCHER C W G, et al. Design and testing of large-bore, ultra-stiff railguns［J］. IEEE Transactions on Magnetics, 1989, 25(1):460-466.

［10］高跃飞. 火炮反后坐装置设计［M］. 北京:国防工业出版社, 2010:30-118.
GAO Y F. Design of counterrecoil mechanism for artillery［M］. Beijing: National Defense Industry Press, 2010:30-118. (in Chinese)
［11］田振国, 孟晓永. 电磁轨道发射状态下的复合导轨动态响应研究［J］. 兵工学报, 2017, 38(4):651-657.
TIAN Z G, MENG X Y. Dynamic response of composite rail during launch process of electromagnetic railgun［J］. Acta Armamentarii, 2017, 38(4):651-657. (in Chinese)
［12］胡玉伟. 电磁轨道炮系统的建模与仿真［D］. 哈尔滨：哈尔滨工业大学, 2007:24-28.
HU Y W. Research on simulation and performance optimization for electromagnetic railgun［D］. Harbin: Harbin Institute of Technology, 2007:24-28. (in Chinese)
［13］ GRANEAU P, GRANEAU N. Electrodynamic force law contrive rsy［J］. Physical Review E, 2001, 63(5): 058601.
［14］ SU Z Z, GUO W, CAO B, et al. The study of simple breech-f- ed railgun recoil force［C］∥Proceedings of the 16th International Sympo sIum on Electromagnetic Launch Technology. Beijing: IEEE, 2012: 1-4.
［15］石江波, 栗保明. 电磁轨道炮后坐过程研究［J］. 兵工学报, 2015, 36(2):227-233.
SHI J B, LI B M. Research on recoil process of electromagnetic railgun［J］. Acta Armamentarii, 2015, 36(2): 227-233. (in Chinese)
［16］陈彦辉, 国伟, 苏子舟. 电磁轨道炮身管工程化面临问题分析与探讨［J］. 兵器材料科学与工程, 2018, 41(2): 109-112.
CHEN Y H, GUO W, SU Z Z. Engineering analysis and study of electromagnetic rail gun tube［J］. Ordnance Material Science and Engineering, 2018, 41(2): 109-112. (in Chinese)
［17］王振春, 鲍志勇, 曹海要,等. 增强型电磁轨道炮电枢轨道接触特性研究［J］. 兵工学报, 2018, 39(3): 451-456.
WANG Z C, BAO Z Y, CAO H Y, et al. Research on contact characteristics of armature and rail in augmented electromagnetic railgun［J］. Acta Armamentarii, 2018, 39(3): 451-456. (in Chinese)

第40卷第6期
2019 年6月兵工学报ACTA
ARMAMENTARIIVol.40No.6Jun.2019

[1]	ZHANG Zhiyong, WANG Tuantuan, GUO Hao, WANG Yafei. Antiaircraft Firing Strategy of Electromagnetic Railgun with Adjustable Muzzle Velocity of Projectile [J]. Acta Armamentarii, 2021, 42(2): 430-437.
[2]	LIN Qinghua， LI Baoming. Modeling and Simulation of Electromagnetic Railgun Launching Process Based on a Transient Multi-physical Field Solver [J]. Acta Armamentarii, 2020, 41(9): 1697-1707.
[3]	ZHU Chunyan, WANG Jun, MA Fuqiang, NI Yanjie, TANG Bo, LI Baoming. Analysis of Sliding Electric Contact Characteristics of Series-augmented Railgun Based on Breech Voltage [J]. Acta Armamentarii, 2020, 41(7): 1280-1287.
[4]	HE Wei, WEI Yanjing. Strength Analysis of Rails and Panels of Cantilever Electromagnetic Railgun during Launching [J]. Acta Armamentarii, 2020, 41(1): 21-31.
[5]	PAN Qinxue， SHAO Chang， XIAO Dingguo， PAN Ruipeng， LIU Xiaohao. Study of Ultrasonic Measurement Method for Bolt Fastening Force Based on Shape Factor [J]. Acta Armamentarii, 2019, 40(4): 880-888.
[6]	YIN Qiang， ZHANG He， LI Haojie， YANG Yuxin. Analysis of In-bore Magnetic Field in Electromagnetic Railgun Considering the Realistic Armature-rail Contact Status [J]. Acta Armamentarii, 2019, 40(3): 464-472.
[7]	FAN Wei， SU Zizhou， FAN Tianfeng, ZHANG Tao， ZHANG Honghai， LIU Yong. Geometry Design and Contact Force Analysis of C-shaped Monolithic Armature [J]. Acta Armamentarii, 2019, 40(10): 1969-1976.
[8]	WANG Zhen-chun， BAO Zhi-yong， CAO Hai-yao， LIU Fu-cai， ZHAN Zai-ji， WANG Da-zheng. Research on Contact Characteristics of Armature and Rail in Augmented Electromagnetic Railgun [J]. Acta Armamentarii, 2018, 39(3): 451-456.
[9]	XING Yan-chang, LYU Qing-ao, LEI Bin, XIANG Hong-jun, CHEN Jian-wei, YUAN Xi-chao. Analysis of Melting Erosion Characteristic on the Contact Interface between U-shaped Armature and Rails for Multiturn Serial-parallel Railgun [J]. Acta Armamentarii, 2018, 39(11): 2081-2091.
[10]	YIN Dong-mei, XIAO Hong-cheng, LI Bao-ming. Analysis of Bending Resistance of Composite Barrel for Electromagnetic Railgun Based on 3D Beam Theory [J]. Acta Armamentarii, 2017, 38(8): 1476-1482.
[11]	YIN Qiang， ZHANG He， LI Hao-jie. Analysis of In-bore Magnetic and Electric Fields in Electromagnetic Railgun under Dynamic Condition [J]. Acta Armamentarii, 2017, 38(6): 1059-1066.
[12]	WU Jin-guo, LI Hai-yuan, CHENG Nian-kai, LI Long, LI Bao-ming. Research on Feeding Position of Armature in Railgun [J]. Acta Armamentarii, 2017, 38(6): 1052-1058.
[13]	LI Zhen-xiao， ZHANG Ya-zhou， NI Yan-Jie， LI Bao-ming. Analysis on the Influence of Turn-off Characteristics of Thyristor on Augmented Railgun [J]. Acta Armamentarii, 2016, 37(9): 1599-1605.
[14]	YIN Dong-mei, LI Bao-ming. Analysis of Progressive Damage of Composite Housing for Railgun under Winding Prestress [J]. Acta Armamentarii, 2016, 37(6): 988-995.
[15]	LIN Qing-hua， LI Bao-ming. Measurement and Numerical Simulation of Transient Electromagnetic Field in Railgun [J]. Acta Armamentarii, 2016, 37(10): 1788-1794.