Research on Numerical Simulation of Submunition Dispenser with Gas Generant and Airbag

doi:10.3969/j.issn.1000-1093.2018.05.005

Abstract

Abstract: For the numerical simulation of submunition dispenser with gas generant and airbag, a model of airbag dispersing is built by using software LS-DYNA and solid-liquid coupling ALE algorithm, in which the mass flow rate of gas is considered as the input parameter of numerical simulation. On the basis of interior ballistic theory and closed bomb vessel experiment, the nominal combustion rate equation of gas generant and the mass flow rate equation are presented. The typical structure of submunition dispenser fileed with different amount of gas generant is simulated to obtain the velocity of submunition dispensed from airbag and the change of overload peak with the amount of gas generant. The simulated results are in agreement with the test results. The results show that the proposed method could be used to predict the velocity and acceleration of submunitions in practical tests. Key

Key words: dispenserbomb, airbagdispersion, gasgenerant, arbitraryLagrangian-Eulerianmethod, numericalsimulation

CLC Number:

TJ413.⁺3

WANG Qi， JIANG Jian-wei， WANG Shu-you. Research on Numerical Simulation of Submunition Dispenser with Gas Generant and Airbag[J]. Acta Armamentarii, 2018, 39(5): 867-874.

References

［1］房玉军.子母弹气囊抛撒技术的理论与实验研究[D].北京:北京理工大学，2005.
FANG Yu-jun.Theory and experimental research on submunition dispenser with airbag[D].Beijing:Beijing Institute of Technology,2005. (in Chinese)
[2］蒋建伟,房玉军,门建兵,等.采用氮气发生剂的子弹药气囊抛撒内弹道计算模型[J].北京理工大学学报，2006,27(5):883-886.
JIANG Jian-wei,FANG Yu-jun,MEN Jian-bing,et al.Interior ballistic model of submunition dispenser with nitrogen gas generant and airbag[J]. Transactions of Beijing Institute of Technology, 2006,27(5):883-886.(in Chinese)
[3］王帅.子母战斗部囊式抛撒系统实验研究及数值仿真[D].南京:南京理工大学,2013.
WANG Shuai.Experimental and simulation study on the explosive cluster warhead dispersion system[D]. Nanjing:Nanjing University of Science and Technology,2013.(in Chinese)
[4］余莉，程涵，刘雄.气囊充气过程流固耦合数值模拟[J].南京航空航天大学学报，2010,42(4):472-476.
YU Li,CHENG Han,LIU Xiong.Numerical simulation of airbag during deploying process[J].Journal of Nanjing University of Aeronautics and Astronautics,2010,42(4):472-476. (in Chinese)
[5］李嗄.气囊式子母弹抛撒过程数值模拟[D].南京:南京理工大学,2012.
LI A.Numerical simulation on dispersal process of gasbag-style cluster bombs[D]. Nanjing:Nanjing University of Science and Technology,2012. (in Chinese)
[6］王浩.子母弹内燃式气囊抛撒模型及计算机仿真[J].兵工学报,2001,22(2):178-181.
WANG Hao.A model for the firing process of the internal-combustion gasbag submunition and its simulation[J]. Acta Armamentarii, 2001,22(2):178-181. (in Chinese)
[7］孟会林,孙新利,姬国勋,等.子母弹抛撒过程数值模拟及其试验[J].弹箭与制导学报,2004,24(8):317-321.
MENG Hui-lin,SUN Xin-li,JI Guo-xun,et al. Test and numerical simulation of the bullets spreading process of a primary-secondary bomb[J]. Journal of Projectiles, Rockets, Missiles and Guidance, 2004, 24(8):317-321. (in Chinese)
[8］张翔.子弹药低过载气囊驱动技术研究[D].北京:北京理工大学,2016.
ZHANG Xiang.Research on technology of low overload airbag driving submunition[D]. Beijing: Beijing Institute of Technology,2016.(in Chinese)
[9］代小芳.基于流固耦合方法的气囊展开数值模拟研究[D].大连:大连理工大学,2008.
DAI Xiao-fang.Numerical simulation of airbag deployment based on fluid-structure interaction methodology[D].Dalian:Dalian University of Technology,2008. (in Chinese)
[10］王帅,王浩,李嗄.含芳纶织物增强内衬复合材料气囊的静态变形过程实验研究与数值模拟[J].功能材料,2013,44(14):2097-2010.
WANG Shuai, WANG Hao, LI A. Experimental research and numerical simulation on static deformation of gasbag with textile reinforced composite lining[J]. Journal of Functional Materials, 2013,44(14):2097-2010. (in Chinese)
[11］ Hyun J K,Chang S K,Jun S H. A study of gas generator with double nozzle system[C]∥28th International Annual Conference of ICT. Karlsruhe,Germany: ICT, 1997:125-1-125-12.
[12］鲍廷钰,邱文坚.内弹道学[M].北京:北京理工大学出版社,1992.
BAO Ting-yu, QIU Wen-jian. Theory of interior ballistics[M]. Beijing:Beijing Institute of Technology Press, 1992. (in Chinese)
[13］朱跃龙.底火能量释放特性及其对内弹道性能研究的影响[D].南京:南京理工大学,2014.
ZHU Yue-long. The primer energy release characteristics and its influence on the interior ballistic performance[D]. Nanjing: Nanjing University of Science and Technology,2014.(in Chinese)

第39卷
第5期2018 年5月兵工学报ACTA
ARMAMENTARIIVol.39No.5May2018

[1]	YAN Zechen, YUE Songlin, QIU Yanyu, WANG Jianping, ZHAO Yuetang, SHI Jie, LI Xu. Improvement on the Calculation Method for Reflected Pressure of Shock Wave in Underwater Explosion [J]. Acta Armamentarii, 2024, 45(4): 1196-1207.
[2]	HE Jiawei, ZHAI Junyi, GAO Weipeng, LI Ye. Numerical Simulation of Flow Characteristics of the Underwater Vehicle with a Cylindrical Structure Based onDifferent Turbulence Models [J]. Acta Armamentarii, 2022, 43(S2): 53-63.
[3]	WANG Ge， ZHANG Chun， LIN Zhiwei， WANG Baohua， TAN Hu， CHEN Chen. Research on's Opening Distance of AHEAD Ammunition [J]. Acta Armamentarii, 2022, 43(S1): 115-120.
[4]	XU Hui, HUANG Chenlei, WANG Xikuo, LIU Kun, LI Zhongxin, WU Zhilin. Theoretical and Experimental Study of Projectile Dynamic Engraving Resistance [J]. Acta Armamentarii, 2022, 43(9): 2263-2273.
[5]	WANG Xiaodong, XU Yongjie, DONG Fangdong, WANG Hao, ZHENG Nana. Numerical Simulation of Penetration Resistance of Kevlar and Ceramic Composite Structures [J]. Acta Armamentarii, 2022, 43(9): 2360-2366.
[6]	GUAN Dian， GUO Yawen， LI Shipeng， TANG Jianing， WANG Ningfei. Influence of Gas-particle Two-phase Flow on Ignition of the Solid Rocket Motor under Lateral Acceleration [J]. Acta Armamentarii, 2022, 43(8): 1792-1807.
[7]	GAO Yueguang, FENG Shunshan, LIU Yunhui, HUANG Qi. Initial Velocity Distribution of Fragments from Cylindrical Charge Shells with Different Thick End Caps [J]. Acta Armamentarii, 2022, 43(7): 1527-1536.
[8]	L Dailong， CHEN Shaosong， XU Yihang， QIU Jiawei. Aerodynamic Characteristics of Close-coupled Canard Missile [J]. Acta Armamentarii, 2022, 43(6): 1316-1325.
[9]	WANG Danyu, NAN Fengqiang, LIAO Xin, XIAO Zhongliang, DU Ping, WANG Binbin. Effect of Flame Inhibitor of the Muzzle Flame of Large Caliber Gun [J]. Acta Armamentarii, 2022, 43(2): 273-278.
[10]	XU Gancheng, YUAN Weize, CHEN Linheng, LI Chengxue, XIE Xuhu, NIE Mengqi. Seismic Collapse Resitance of NFB700 High-strength Steel Plate [J]. Acta Armamentarii, 2022, 43(2): 391-400.
[11]	LU Kuan， RAO Xiang， WANG Huamei， ZHANG Qian. The Influences of Different Mooring Systems on the Hydrodynamic Performance of Buoy [J]. Acta Armamentarii, 2022, 43(1): 120-130.
[12]	CHENG Shenshen, TAO Ruyi, WANG Hao, XUE Shao, LIN Qingyu. Dampling Characteristics of Projectile in Engraving Process of Nylon Sealing Band [J]. Acta Armamentarii, 2021, 42(9): 1847-1857.
[13]	GUAN Dian, LI Shipeng, LIU Zhu, WANG Ningfei. Influence of Lateral Acceleration on Ignition Transients of Solid Rocket Motor [J]. Acta Armamentarii, 2021, 42(9): 1877-1887.
[14]	WANG Danyu, NAN Fengqiang, LIAO Xin, XIAO Zhongliang, DU Ping, WANG Binbin. Characteristics of Muzzle Flow Field of Large Caliber Gun Considering Chemical Reaction [J]. Acta Armamentarii, 2021, 42(8): 1624-1630.
[15]	TAN Meijing， YANG Guang， LI Yu， ZHOU Yu， CAO Zhanwei， YAN Hao， TAN Zijing. Influence of Rectifying Wedge on the Flow Structure and Aerodynamic Heating Environment around All-movable Rudder [J]. Acta Armamentarii, 2021, 42(8): 1648-1659.