Study of Leakage Flow Boundary Model-based Sealing Labyrinth Analysis Method

doi:10.3969/j.issn.1000-1093.2017.04.026

Abstract

Abstract: In view of the complex structure of labyrinth channel, changing sealing gap and a large amount of grids in numerical simulation calculation domain, a high-speed straight-through sealing labyrinth structure adopting different sealing configuration parameters is investigated. A labyrinth leakage flow boundary model is established based on test results, which can reveal the effects of environmental parameters and sealing configuration parameters on sealing property. The results show that the proposed model can be used to repeat the experimental rule and reliably simulate the labyrinth leakage flow in multistage compressor. The calculated sresult shows that 0.5% flow leakage would result in decreasing the flow, pressure ratio and efficiency of a three-stage compressor by 1.4%, 0.3% and 1.1%, respectively. Key

Key words: propulsionsystemofaviationandaerospace, sealinglabyrinth, highspeedexperiment, leakageflowboundarymodel, numericalsimulation

CLC Number:

V231.3

FU Xin， CAO Yong-hua， ZHANG Yi-bin， ZHU Chao. Study of Leakage Flow Boundary Model-based Sealing Labyrinth Analysis Method[J]. Acta Armamentarii, 2017, 38(4): 824-832.

References

［1］纪国剑. 航空发动机典型篦齿封严泄漏特性的数值和实验研究[D].南京:南京航空航天大学, 2008.
JI Guo-jian. Numerical and experimental investigation of sealing characteristics on typical labyrinth seals in aeroengine[D].Nanjing: Nanjing University of Aeronautics and Astronautics,2008.(in Chinese)
［2］沈虹, 郑天慧, 陈玉洁. 航空发动机封严技术的进展[J]. 燃气涡轮试验与研究, 2011,24(4):51-55.
SHEN Hong, ZHENG Tian-hui, CHEN Yu-jie. Improvement of aero-engine sealing technology[J]. Gas Turbine Experiment and Research ,2011,24(4):51-55. (in Chinese)
［3］ Wellborn S R, Okiishi T H. The influence of shrouded stator cavity flows on multistage compressor performance[J]. Journal of Turbomachinery, 1999, 121(3):486-497.
［4］禄堃. 轴流压气机静叶气封间隙流的研究和流道优化[D]. 北京:清华大学, 2008.
LU Kun. Research on axial-compressor shrouded stator cavity flows and flow path optimization[D]. Beijing: Tsinghua University,2008. (in Chinese)
［5］ Gier J, Stubert B, Brouillet B, et al. Interaction of shroud leakage flow and main flow in a three-stage LP turbine[J]. Journal of Turbomachinery, 2003, 127(4):105-116.
［6］马文生, 禄堃, 顾春伟. 压气机静叶气封几何优化与流动分析[J]. 工程热物理学报, 2009,30(8):1288-1290.
MA Wen-sheng, LU Kun, GU Chun-wei. Compressor stator seal cavity geometry optimization and flow analysis[J]. Journal of Engineering Thermophysics, 2009,30(8): 1288-1290. (in Chinese)
［7］应银生, 马石. 叶冠齿数和齿顶间隙对涡轮气动性能的影响[J]. 航空制造技术, 2016,496(1/2):128-131.
YING Yin-sheng, MA Shi. Effect of the shroud seal number and the tip clearance on the aerodynamic performance of the turbine[J].Aeronautical Manufacturing Technology, 2016,496(1/2):128-131. (in Chinese)
［8］温泉, 梁德旺, 王可. 旋转直管流场的数值模拟[J].南京航空航天大学学报，2000,32(5):539-544.
WEN Quan, LIANG De-wang, WANG Ke. Rotary straight pipe field numerical simulation[J].Journal of Nanjing University of Aeronautics & Astronautics,2000,32(5):539-544.

［9］ Kuwamura Y, Matsumoto K, Uehara H, et al. Development of new high-performance labyrinth seal using aerodynamic approach[C]∥ ASME Turbo Expo 2013: Turbine Technical Conference and Exposition. San Antonio, Texas, US: ASME ,2013.

［10］ Rhode D L, Allen B F. Measurement and visualization of leakage effects of rounded teeth tips and rub-grooves on stepped labyrinths[J]. Journal of Engineering for Gas Turbines & Power, 1999, 123(3):604-611.
［11］张勃, 吉洪湖, 杜发青,等. 篦齿封严尺寸缩放与气流温度变化对流动与传热影响实验研究[J]. 推进技术, 2016,37(2):304-310.
ZHANG Bo, JI Hong-hu, DU Fa-qing, et al. Experimental investigation of scaling and temperature effects on flowing and heat transfer characteristics in labyrinth seals[J]. Journal of Propulsion Technology, 2016,37(2):304-310.(in Chinese)
［12］塔鲁达纳斯基.非接触密封/间隙密封与迷宫密封的原理和应用[M].李均卿，刁元康，译. 北京:机械工业出版社,1986.
Trutnovsky K. Berührungsfreie dichtungen: grundlagen und anwendungen der strmung durch spalte und labyrinth[M]. LI Jun-qing, DIAO Yuan-kang, translated. Beijing: China Machine Press,1986.(in Chinese)
［13］ Stocker H L. Determining and improving labyrinth seal perfor-mance in current and advanced high performance gas turbines[J]. AGARD Conference Proceedings,1978,237:13.
［14］赵海刚, 刘振侠. 航空发动机篦齿封严特性数值模拟[J]. 燃气涡轮实验与研究, 2010, 23(1):26-30.
ZHAO Hai-gang, LIU Zhen-xia. Numerical analyses for the performance of straight labyrinth seal of aircraft engine[J]. Gas Turbine Experiment and Research, 2010,23(1):26-30.(in Chinese)
［15］王锁芳, 吕海峰. 转静态封严篦齿流场的数值分析和封严特性的实验[J]. 航空动力学报, 2005, 20(3):444-449.
WANG Suo-fang, LYU Hai-feng. Numerical analysis of flow and experimental investigation of labyrinth sealing characteristics at rotational and static states[J]. Journal of Aerospace Power, 2005, 20(3):444-449.(in Chinese)
［16］吴丁毅. 两类常用篦齿密封和临界特性的分析与比较[J]. 航空动力学报, 1997,12(4):397-400.
WU Ding-yi. Two types of commonly used grate tooth seal and critical features analysis and comparison[J]. Journal of Aerospace Power, 1997,12(4):397-400.(in Chinese)

［17］朱高涛, 刘卫华. 迷宫密封泄漏量计算方法的分析[J]. 润滑与密封, 2006(4):123-126.
ZHU Gao-tao, LIU Wei-hua. Analysis of calculational methods on leakage for labyrinth seals[J]. Lubrication Engineering, 2006(4): 123-126.(in Chinese)



下9篇留版

第38卷
第4期2017 年4月兵工学报ACTA
ARMAMENTARIIVol.38No.4Apr.2017

[1]	YAN Zechen, YUE Songlin, QIU Yanyu, WANG Jianping, ZHAO Yuetang, SHI Jie, LI Xu. Improvement on the Calculation Method for Reflected Pressure of Shock Wave in Underwater Explosion [J]. Acta Armamentarii, 2024, 45(4): 1196-1207.
[2]	HE Jiawei, ZHAI Junyi, GAO Weipeng, LI Ye. Numerical Simulation of Flow Characteristics of the Underwater Vehicle with a Cylindrical Structure Based onDifferent Turbulence Models [J]. Acta Armamentarii, 2022, 43(S2): 53-63.
[3]	WANG Ge， ZHANG Chun， LIN Zhiwei， WANG Baohua， TAN Hu， CHEN Chen. Research on's Opening Distance of AHEAD Ammunition [J]. Acta Armamentarii, 2022, 43(S1): 115-120.
[4]	XU Hui, HUANG Chenlei, WANG Xikuo, LIU Kun, LI Zhongxin, WU Zhilin. Theoretical and Experimental Study of Projectile Dynamic Engraving Resistance [J]. Acta Armamentarii, 2022, 43(9): 2263-2273.
[5]	WANG Xiaodong, XU Yongjie, DONG Fangdong, WANG Hao, ZHENG Nana. Numerical Simulation of Penetration Resistance of Kevlar and Ceramic Composite Structures [J]. Acta Armamentarii, 2022, 43(9): 2360-2366.
[6]	GUAN Dian， GUO Yawen， LI Shipeng， TANG Jianing， WANG Ningfei. Influence of Gas-particle Two-phase Flow on Ignition of the Solid Rocket Motor under Lateral Acceleration [J]. Acta Armamentarii, 2022, 43(8): 1792-1807.
[7]	GAO Yueguang, FENG Shunshan, LIU Yunhui, HUANG Qi. Initial Velocity Distribution of Fragments from Cylindrical Charge Shells with Different Thick End Caps [J]. Acta Armamentarii, 2022, 43(7): 1527-1536.
[8]	L Dailong， CHEN Shaosong， XU Yihang， QIU Jiawei. Aerodynamic Characteristics of Close-coupled Canard Missile [J]. Acta Armamentarii, 2022, 43(6): 1316-1325.
[9]	WANG Danyu, NAN Fengqiang, LIAO Xin, XIAO Zhongliang, DU Ping, WANG Binbin. Effect of Flame Inhibitor of the Muzzle Flame of Large Caliber Gun [J]. Acta Armamentarii, 2022, 43(2): 273-278.
[10]	XU Gancheng, YUAN Weize, CHEN Linheng, LI Chengxue, XIE Xuhu, NIE Mengqi. Seismic Collapse Resitance of NFB700 High-strength Steel Plate [J]. Acta Armamentarii, 2022, 43(2): 391-400.
[11]	LU Kuan， RAO Xiang， WANG Huamei， ZHANG Qian. The Influences of Different Mooring Systems on the Hydrodynamic Performance of Buoy [J]. Acta Armamentarii, 2022, 43(1): 120-130.
[12]	CHENG Shenshen, TAO Ruyi, WANG Hao, XUE Shao, LIN Qingyu. Dampling Characteristics of Projectile in Engraving Process of Nylon Sealing Band [J]. Acta Armamentarii, 2021, 42(9): 1847-1857.
[13]	GUAN Dian, LI Shipeng, LIU Zhu, WANG Ningfei. Influence of Lateral Acceleration on Ignition Transients of Solid Rocket Motor [J]. Acta Armamentarii, 2021, 42(9): 1877-1887.
[14]	WANG Danyu, NAN Fengqiang, LIAO Xin, XIAO Zhongliang, DU Ping, WANG Binbin. Characteristics of Muzzle Flow Field of Large Caliber Gun Considering Chemical Reaction [J]. Acta Armamentarii, 2021, 42(8): 1624-1630.
[15]	TAN Meijing， YANG Guang， LI Yu， ZHOU Yu， CAO Zhanwei， YAN Hao， TAN Zijing. Influence of Rectifying Wedge on the Flow Structure and Aerodynamic Heating Environment around All-movable Rudder [J]. Acta Armamentarii, 2021, 42(8): 1648-1659.