Welcome to Acta Armamentarii ! Today is Share:

Acta Armamentarii ›› 2016, Vol. 37 ›› Issue (7): 1153-1160.doi: 10.3969/j.issn.1000-1093.2016.07.001

• Paper •     Next Articles

Research on Digitized Modeling Method of Riding Road of Vehicle

WANG Hong-yan1, WANG Qin-long1, RUI Qiang1, LI Rong-li2, ZHANG Jing2, LUO Tao2   

  1. (1.Department of Mechanical Engineering, Academy of Armored Forces Engineering, Beijing 100072, China;2.Beijing Special Vehicle Research Institute, Beijing 100072, China)
  • Received:2016-01-07 Revised:2016-01-07 Online:2016-09-05
  • Contact: WANG Hong-yan E-mail:why_cvt@263.net

Abstract: Digitized modeling method of riding road of vehicle is researched for improving the accuracy of vehicle virtual test results. Dual-track real profilometer is used to measure the periodic medium wave and long wave roads. The credibility and veracity of measuring method are verified by comparing actual measuring data with wave curves which are built based on the design parameters of road outline. Then two kinds of random roads, i.e., residue road and gravel road, are measured by using a dual-track real profilometer, and the actual road roughness data is obtained. Power spectral density (PSD) of actual measuring data is estimated by Welch algorithm based on modified periodogram method, and the rank of measuring random road is assessed according to GB/T 7031—2005 national standard. The 3D random road models are built by means of harmony superposition method, of which PSD is consistent with actually measured data, and its credibility is verified consequently.

Key words: ordnance science and technology, road measuring, road roughness, harmony superposition method, 3D random road surface model

CLC Number: