[1] 刘来龙.发射筒内弹道性能参数可靠性评估方法探讨[J].舰船科学技术, 2003,25(2):31-48. LIU Lai-long.Methods discussing of reliability evaluation of the canister's inner ballistic functional parameters [J].Ship Science and Technology,2003,25(2):31-48.(in Chinese) [2] 张志华,李庆民,田艳梅.小样本多技术状态性能可靠性的仿真评估方法[J].系统仿真学报,2007, 19(2):417-420. ZHANG Zhi-hua,LI Qing-min,TIAN Yan-mei.Reliability evaluating method of small-sample in multi-technical states by simulation[J]. Journal of System Simulation, 2007,19(2):417-420.(in Chinese) [3] 肖虎斌,赵世平.燃气蒸汽式发射动力装置复杂内流场数值模拟[J]. 固体火箭技术,2009,32(4):392-395. XIAO Hu-bin,ZHAO Shi-ping.Numerical simulation of the complex flow field in combustion gas-steam launching system[J].Journal of Solid Rocket Technology,2009, 32(4):392-395.(in Chinese) [4] 赵险峰,王俊杰.潜地弹道导弹发射系统内弹道学[M].哈尔滨:哈尔滨工程大学出版社, 2001. ZHAO Xian-feng,WANG Jun-jie. Canister's interior trajectory of submarine-based ballistics missile launching system[M].Harbin: Harbin Engineering University Press,2001.(in Chinese) [5] 肖虎斌.潜射导弹燃气蒸汽式发射装置的内弹道建模[J].舰船科学技术, 2010,32(2):36-39. XIAO Hu-bin.Interior ballistics modeling of submarine-based missile launching unit[J].Ship Science and Technology,2010,32(2): 36-39.(in Chinese) [6] 刘琦,冯静,周经伦.火箭发动机性能可靠性的Bayes分析[J].中国空间科学技术,2003,46(6):51-53. LIU Qi,FENG Jing,ZHOU Jing-lun.The Bayes analysis for liquid rocket engine performance reliability [J].Chinese Space Science and Technology,2003, 46(6):51-53.(in Chinese) [7] 赵婉,温玉全.可靠性评估领域中环境因子的研究进展[J].电子 产品可靠性与环境试验,2005,1(2):69-72. ZHAO Wan,WEN Yu-quan.The research status of environmental factor in reliability assessment [J].Electronic Product Reliability and Environmental Testing, 2005,1(2):69-72.(in Chinese) [8] 方开泰,刘民干,周永道.试验设计与建模[M].北京:高等教育出版社,2011. FANG Kai-tai,LIU Min-gan,ZHOU Yong-dao.Design and modeling of experiments[M].Beijing:Higher Education Press,2011.(in Chinese) [9] 赵世平,鲍福廷.燃气蒸汽式发射系统内弹道若干问题研究[J].固体火箭技术,2003,26(3):7-10. ZHAO Shi-ping,BAO Fu-ting.Analysis of several coefficients of interior ballistic evaluation for gas and steam launching system[J].Journal of Solid Rocket Technology,2003, 26(3):7-10.(in Chinese) [10] 张仁军,鲍福廷.两种不同注水方式的燃气蒸汽式发射系统内弹道性能比较[J].固体火箭技术,2005,28(1):5-9. ZHANG Ren-jun,BAO Fu-ting.Comparison of internal ballistic properties between gas and steam launching systems in two different modes of water injection[J].Journal of Solid Rocket Technology,2005,28(1):5-9.(in Chinese) [11] 都军民,汪太琨.利用Monte-Carlo方法对导弹筒内弹道参数的分布进行分析[J].弹箭与制导学报,2002, 22(4):45-47. DU Jun-min,WANG Tai-kun.The analysis for missile ballistic parameter distribution with Monte Carlo way[J].Journal of Projectiles,Rockets,Missiles Guidance,2002,22(4):45-47.(in Chinese) [12] 汪太琨.用Monte-Carlo方法对某设计弹道的分布进行评定[J].舰船科学技术,2003,25(2):16-18. WANG Tai-kun.The analysis for missile ballistic parameter distribution with Monte Carlo way[J].Ship Science and Technology,2003,25(2):16-18.(in Chinese) [13] 朱力行,许王莉.非参数蒙特卡罗检验及其应用[M].北京:科学出版社,2008. ZHU Li-hang,XU Wang-li.Nonparametric Monte Carlo tests and application [M].Beijing:Science Press,2008.(in Chinese)