Optimization Design of Cartridge Pressing Structure for Feed Mechanism Based on the Sensitivity Analysis of Multi-attributeDecision Making

doi:10.3969/j.issn.1000-1093.2014.02.016

Abstract

Abstract: Sensitivity analysis is an important optimization process of multi-attribute decision making, of which thorough analysis of attribute values or change of attribute weights makes great sense in making decision. On the basis of the linear weighting model, a sensitivity analysis method is proposed, the sensitivity problem which is caused by the change of an attribute value or more related attribute values and the change of an attribute weight or more related attribute weights is researched, and the critical value or the stable interval of sensitivity which keeps the original sort result of decision unchangeable are calculated by a quantitative calculation method. The example about some small-bore artillery feed mechanism shows that the method is scientific and feasible.

Key words: system engineering methodology, multi-attribute decision making, attribute value, attribute weight, sensitivity analysis, feed mechanism

CLC Number:

C934
TP301.6

YANG Li， SUN Zhi-li， YIN Ming-ang， WANG Yu-ning. Optimization Design of Cartridge Pressing Structure for Feed Mechanism Based on the Sensitivity Analysis of Multi-attributeDecision Making[J]. Acta Armamentarii, 2014, 35(2): 241-247.

References

［1］ Mendoza G A, Martin H. Multi-criteria decision analysis in natural resource management: a critical review of methods and new modeling paradigms[J].Forest Ecology and Management, 2006,230(1/2/3):1-22.
[2］万树平.供应商选择的多属性群决策方法[J].计算机工程与应用,2009, 45(8):198-199,203.
WAN Shu-ping. Method of multi-attribute group decision making for supplier selection[J].Computer Engineering and Applications,2009,45(8):198-199,203.(in Chinese)
[3］ Sivapirakasam S P, Surianarayanan M J. Multi attribute decision making for green electrical discharge machining[J].Expert System with Applications, 2011,38(7):8370-8374.
[4］双海军,孟卫东.供应商能力有约束的混合型多属性决策方法[J].控制与决策,2011, 26(1):17-21.
SHUANG Hai-jun, MENG Wei-dong. Hybrid multi-attribute decision-making research based on vendor’s capacity constraint[J].Control and Decision,2011, 26(1):17-21.(in Chinese)
[5］马存宝,张彦辉,史浩山,等.基于模糊多属性评判方法的因果强度求解算法[J].仪器仪表学报,2009, 30(2):257-260.
MA Cun-bao, ZHANG Yan-hui,SHI Hao-shan. Causal strength solving algorithm based on fuzzy multi attribute evaluation method [J].Chinese Journal of Scientific Instrument , 2009, 30(2):257-260. (in Chinese)
[6］ Starr M K. A discussion of some normative criteria for decision making under uncertainty [J]. Industrial Management Review, 1966,8(1):71-78.
[7］ Evans J R. Sensitivity analysis in decision theory [J]. Decision Science,1984,15(2):239-247.
[8］ Insua D R, French S. A framework for sensitivity analysis in discrete multi-objective decision-making[J].European Journal of Operation Research, 1991,54(2):176-190.
[9］ Traintaphyllou E, Sabchez A. A sensitivity analysis approach for some deterministic multi criteria decision making methods[J]. Decision Science,1997,28(1):151-187.
[10］ Armacost R L, Hosseini J C. Identification of determinant attributes using the analytic hierarchy process[J]. Journal of the Academy of Making Science,1994,22(4):383-392.
[11］吴超,胡昆.区间数多属性决策中权重灵敏度分析[J].系统工程与电子技术,2004,26(9):1217-1218.
WU Chao, HU Kun. Sensitivity analysis to weight of priorities in multiple attribute decision making with intervals[J].Systems Engineering and Electronics, 2004, 26(9):1217-1218.(in Chinese)
[12］樊治平,李洪燕,姜艳萍.基于OWA算子的群决策方法的灵敏度分析[J].东北大学学报:自然科学版,2004,25(11):1114-1117.
FAN Zhi-ping, LI Hong-yan, JIANG Yan-ping. Sensitivity analysis of group decision making method based on OWA operators[J].Journal of Northeastern University:Natural Science, 2004,25(11):1114-1117.(in Chinese)
[13］ Hwang C L, Yoon K. Multiple attribute decision making: methods and applications [M]. Berlin: Springer-Verlag,1981:20-25.
[14］梁世瑞.自动机创新学引论[M].北京:国防工业出版社,2007:173-182.
LIANG Shi-rui. Innovation introduction of automata[M]. Beijing: National Defense Industry Press, 2007:173-182.
[15］董德威，颜云辉. 带钢质量评价的属性权重灵敏度分析［J］. 组合机床与自动化加工技术，2012，7（7）：11-17.
DONG De-wei, YAN Yun-hui. Sensitivity analysis on attribute weight of strip steel quality evaluation［J］. Modular Machine Tool and Automatic Manufacturing Technique, 2012,7(7):11-17. (in Chinese)
[16］ GB/T 5213—2008 冷轧低碳钢板及钢带[S].北京：中国标准出版社，2009.
GB/T 5213—2008 Cold rolling low carbon steel and strip[S]. Beijing:China Standards Press，2009. (in Chinese)

[1]	LI Meng, WU Haijun, DONG Heng, REN Guang, ZHANG Peng, HUANG Fenglei. Machine Learning-based Models for Predicting the Penetration Depth of Concrete [J]. Acta Armamentarii, 2023, 44(12): 3771-3782.
[2]	LIU Qin, SUN Zhi-li, QIAN Yun-peng, LIU Ying. Reliable Fatigue Life Analysis Method Based on Probabilistic Performance Measure [J]. Acta Armamentarii, 2016, 37(8): 1530-1535.
[3]	YANG Yuan-zhi， WANG Hong-wei， SUO Zhong-ying， CHEN You， FAN Xiang-yu. An Emitter Threat Evaluation Method Based on Rough Set and TOPSIS [J]. Acta Armamentarii, 2016, 37(5): 945-952.
[4]	YANG Li, MA Xiao-bing. Storage Availability Modeling and Cost Analysis for a Repair-replacement Series System [J]. Acta Armamentarii, 2015, 36(3): 552-558.
[5]	CHENG Guang-li， HU Jin-hua， ZHANG Ming-min. Analytical Methods for Sensitivity of Acoustic Field in Shallow Water to Uncertain Environmental Parameters [J]. Acta Armamentarii, 2014, 35(4): 567-571.
[6]	ZHANG Zhong-min， LI Jun-shan， SONG Ping₂, YAN Qi-fei. A Multi-agent Intelligent Decision Approach Based on Fuzzy Analytic Hierarchy Process for Service Status of ElectronicCountermeasures Equipment [J]. Acta Armamentarii, 2014, 35(4): 516-522.
[7]	DONG Hua-chao, SONG Bao-wei, WANG Peng. Multi-objective Optimal Design of Automatic Underwater Vehicle Shell Structure [J]. Acta Armamentarii, 2014, 35(3): 392-397.
[8]	ZENG Jia-you, WANG Guo-wei, ZHONG Jian-lin, XIE Yu-peng. Research on Cooperative Saturation Attack Problems and Models of Ship-to-ship Missiles from Multi-ship Platforms [J]. Acta Armamentarii, 2014, 35(2): 256-261.
[9]	TANG Yu-juan, WANG Xin-jie, WANG Jiong. Design and Experiment of a Linear Ultrasonic Motor for Fuze Safety System [J]. Acta Armamentarii, 2014, 35(1): 27-34.