Decision Feedback Estimation of Multiple input/ Multiple output Orthogonal Frequency Division Multiplexing Channel Based on Punching Technique Via UWA Shallow Sea

doi:10.3969/j.issn.1000-1093.2013.09.021

Abstract

Abstract: An optimal configuration model of spare parts under the condition of improved spare part fill rate is established in order to overcome the disadvantage of that traditional system spare parts fill rate is prone to minimum. An improved layered margin optimization algorithm is given to improve the optimization efficiency of algorithm by using the layered optimization idea. The detailed optimization flow of the algorithm is given, and the optimization efficiency of the algorithm is analyzed in theory. The correctness and rationality of the model are proved by analyzing the calculated result of an example.

Key words: operation research, spare part, spare parts fill rate, margin optimization algorithm, optimal configuration

CLC Number:

TP590. 6530

ZHAO Jian-zhong, LI Hai-jun, YE Wen, WANG Hao-wei. Decision Feedback Estimation of Multiple input/ Multiple output Orthogonal Frequency Division Multiplexing Channel Based on Punching Technique Via UWA Shallow Sea[J]. Acta Armamentarii, 2013, 34(9): 1187-1192.

References

[1] Zhang J, Zhang J. Fill rate of single-stage general periodic review inventory systems [ J]. Operations Research Letters, 2007, 35(4):503 -509. [2] Van der Heijden M C. Near cost-optimal inventory control policies for divergent networks under fill rate constraints[J]. International Journal of Production Economics,2000,63(2):161 -179. [3] Pince C, Gurler U, Berk E. A continuous review replenishment disposal policy for an inventory system with autonomous supply and fixed disposal costs [ J]. European Journal of Operational Research, 2008, 190(2): 421 -442. [4] Sleptchenko A, Van der Heijden M C, Van Harten A. Effects of finite repair capacity in multi-echelon, multi-indenture service part supply systems[J]. International Journal of Production Economics, 2002, 79(3): 209 -230. [5] Lau H C, Song H, See C T, et al. Evaluation of time-varying availability in multi-echelon spare parts systems with passivation [J]. European Journal of Operational Research, 2006,170(1):91 -105. [6] 孙江生,李苏剑,吕艳梅,等. 武器贵重备件三级库存模型仿真研究[J]. 兵工学报,2008,29(7):854 -858. SUN Jiang-sheng, LI Su-jian, LV Yan-mei, et al. Simulation and research on the three-echelon storage model of the valuable spare parts in weapon equipment[J]. Acta Armamentarii,2008,29(7): 854 -858. (in Chinese) [7] 聂涛,盛文. K:N 系统可修复备件两级供应保障优化研究[J]. 系统工程与电子技术,2010, 32(7):1452 -1455. NIE Tao, SHENG Wen. Research on two-echelon supply support optimizing for repairable spare parts of K:N system[J]. Systems Engineering and Electronics, 2010, 32 (7):1452 - 1455. ( in Chinese) [8] 杨秉喜. GJB4355《备件供应规划要求》实施指南[M]. 北京:总装备部技术基础管理中心,2006. YANG Bing-xi. GJB4355 《spare parts supply programming request》implement guide[M]. Beijing: General Equipment Department Technique Basic Management Center, 2006. ( in Chinese) [9] 孟祥辉. 面向动用的装甲装备备件需求预测与优化配置建模研究[D]. 北京:装甲兵工程学院,2011. MENG Xiang-hui. Research on operation-oriented forecast and optimal deployment modeling for armored equipment spare parts demand [D]. Beijing: Academy of Armored Forces Engineering,2011. (in Chinese) [10] Kececioglu D. Maintainability, availability and operational readiness engineering HDB [ M]. New Jersey: Prentice-Hall Inc, 1995. [11] 贺步杰. 装备备件最优库存建模———多级技术[M]. 第2版. 北京: 电子工业出版社,2008. HE Bu-jie. Equipment spare parts optimizing storage modeling———multi-echelon technique[ M]. 2nd ed. Beijing: Electronic Industry Publishing Company, 2008. (in Chinese) [12] 程海龙,康锐,肖波平,等. 备件满足率约束下的备件模型[J]. 系统工程与电子技术,2007,29(8):1314 -1316. CHENG Hai-long, KANG Rui, XIAO Bo-ping, et al. Spare model under the constraint of spare sufficiency[J]. Systems Engineering and Electronics, 2007,29(8):1314 - 1316. (in Chinese)

[1]	WANG Weijia, WANG Yubing, TIAN Jin, MAO Zhaojun, DU linlin. Optimal Configuration of Aircraft Swarm’s Active Localization with One Transmitter and Multiple Receivers [J]. Acta Armamentarii, 2023, 44(6): 1655-1664.
[2]	LI Jingfeng, CHEN Yunxiang, XIANG Huachun, GAO Yangjun, ZHAO Jing. Multi-Objective Spare Parts Scheduling Method in Wartime Considering Lateral Transshipment and Emergency Distribution [J]. Acta Armamentarii, 2023, 44(3): 816-830.
[3]	HU Qi-wei， JIA Xi-sheng， ZHAO Jian-min. A Model of Calculating Spare Parts Demand Volume by Considering Preventive Maintenance [J]. Acta Armamentarii, 2016, 37(5): 916-922.
[4]	JIN Jia-shan, CAI Zhi-ming, CHEN Yan-qiao. Contrastive Research on Warship Formation Spare Part Support Plans [J]. Acta Armamentarii, 2016, 37(12): 2356-2365.
[5]	WANG Tie-ning, LI Hao, WANG Sheng-feng, HAN Chao-shuai. Optimization of Operational Mission-oriented Carried Spares Allocation of Armored Equipment [J]. Acta Armamentarii, 2016, 37(10): 1881-1888.
[6]	ZHANG Yong-qiang, XU Zong-chang, SUN Han-bing, HU Chun-yang. Optimization of Carried Spare Parts Based on Monte Carlo Simulation and Parallel Particle Swarm Optimization Algorithm [J]. Acta Armamentarii, 2016, 37(1): 122-130.
[7]	LIU Shao-wei， GUAN Jiao， WANG Jie， SHU Tao， FENG Gang. Research on Two-echelon Spare Parts Inventory Systems with Lateral Transshipments [J]. Acta Armamentarii, 2015, 36(7): 1334-1339.
[8]	WANG Shen， LI Qing-min， LI Hua， RUAN Min-zhi. Optimal Cooperative Ordering Policy for Spare Parts Inventory with Two Supply Modes [J]. Acta Armamentarii, 2015, 36(2): 337-344.
[9]	WANG Zheng-yuan, CAO Ji-ping, ZHU Yu, ZHU Ya-hong. An Optimization Model of Wartime Spare Parts Resource Allocation on Consideration of Maintainability [J]. Acta Armamentarii, 2014, 35(5): 719-724.
[10]	ZHANG Lei， FANG Yang-wang， CHAI Dong， YONG Xiao-ju. Cruise Missile Path Planning Based on Improved Quantum Evolutionary Algorithm [J]. Acta Armamentarii, 2014, 35(11): 1820-1827.
[11]	LIU Xi-chun, ZHU Long-shi, ZHANG Wei. Analysis of Random Dynamic Stiffness Characteristics of Supercavitating Vehicle Structure [J]. Acta Armamentarii, 2013, 34(9): 1197-1200.
[12]	RUAN Min-zhi, LI Qing-min, ZHANG Guang-yu, YAO Gang. Optimization Method of Carrying Spare Parts Support Project for Warship Equipment under Multi-constraints [J]. Acta Armamentarii, 2013, 34(9): 1144-1149.
[13]	TAO Xiao-chuang， GUO Lin-han， XIAO Bo-ping， LIU Rui. Demand Prediction Model for Spare Parts Based on Fill Rate Allocation [J]. Acta Armamentarii, 2012, 33(8): 975-979.
[14]	XIA Zhi-jun， ZHANG Xin-hua， XU Lin-zhou. Study on Orientation Angle of Two Acoustic Homing Torpedoes Relative to Target withParallel Salvo Launched by Submarine [J]. Acta Armamentarii, 2012, 33(5): 636-640.