[1] 李敬明, 田勇, 张明, 等. 熔黑梯炸药凝固过程的数值模拟与实验验证[J]. 含能材料, 2009, 17(4):428 -430.

LI Jing-ming, TIAN Yong, ZHANG Ming, et al. Numerical simulation and experimental validation of RHT solidification process[J]. Chinese Journal of Energetic Materials, 2009, 17(4):428-430. (in Chinese)

[2] 李敬明, 田勇, 张伟斌, 等. 炸药熔铸过程缩孔和缩松的形成与预测[J]. 火炸药学报, 2011, 34(2):17 -20.

LI Jing-ming, TIAN Yong, ZHANG Wei-bin, et al. Formation and prediction of shrinkage hole and shrinkage porosity in explosive during casting process[J]. Chinese Journal of Explosives & Propellants, 2011, 34(2): 17 -20. (in Chinese)

[3] 陈锐. 装药缺陷对发射安全性的影响研究[D]. 北京: 北京理工大学, 2006.

CHEN Rui. Research on the effects of charge defects on launch safety[D]. Beijing: Beijing Institute of Technology, 2006. (inChinese)

[4] 田勇. 炸药熔铸成型过程监测评价及数值模拟研究[D]. 北京:中国科学院研究生院工程热物理研究所, 2010.

TIAN Yong. Process monitoring/ evaluation and numerical simulation during casting explosive solidification[D]. Beijing: Instituteof Engineering Thermophysics of Graduate University of Chinese Academy of Sciences, 2010. (in Chinese)

[5] Wang D L, Xie Z Y, Sun W X, et al. Solidification simulation of melt-cast explosive under pressurization[C] //Proceedings of the 6th International Conference on Physical and Numerical Simulation of Materials Processing. Guilin: Gulin University of Electronic Technology, 2012: 71 -75.

[6] Gremaud M, Rappaz M. Modeling of foundry processes: differences between various solutions[J]. Transactions of the American Foundry Society, 2001, 109:1 -12.

[7] Patankar S V. Numerical heat transfer and fluid flow[M]. New York: Hemisphere Publishing Corporation, 1980.

[8] ESI Group, ProCAST 2010.0 User’s Manual [M]. Version 2009.1. US: ESI North America, 2010.