［1］ Takezawa H，Hamamatsu H，Mohri N. Development of micro- EDM- center with rapidly sharpened electrode［J］. Journal of Materials Processing Te chnology，2004，149(6)：112-116. ［2］ 黄燕花，董申，袁光辉，等. 微细电极精密车削技术［J］. 电加工与模具 ，2003，（4）：14-16. HUANG Yan-hua，DONG Shen, YUAN Guang-hui，et al. The precision turning technol ogy to machine micro electrodes［J］. Electromachining and Mould, 2003，(4)：14- 16. (in Chinese) ［3］ Yeo S H，Choo J H，Sim K H A. On the effects of ultrasonic vibrations on localized electrochemical deposition［J］. International Journal of Micromec hamics and Microengineering, 2002, (12): 271-279. ［4］ Lin C S，Lee C Y，Yang J H，et al. Improved copper micro column fabri cated by localized electro chemical deposition［J］. Electrochemical and Solid- State Letter, 2005, 8(9):125-129. ［5］ Takahata K, Gianchandani Y B. Batch mode micro-EDM for high-density and high-throughput micromachining［C］∥Proceedings of the IEEE Micro Electro Mechanical Systems，Interlaken：MEMS，2001，（1）：72-75. ［6］ Schuster R，Kirchner V，Allongue P，et al. Electrochemical micromachi ning［J］. Science, 2000, 289（7）: 98-101. ［7］ Trimmer A L，Hudson J L. Single-step electro-chemical machining of complex nanostructures with ultrashort voltage pulses［J］. Applied Physics Lett ers, 2003, 82（19）：3327-3329. ［8］ Ahn S H，Ryu S H，Choi D K. Electro-chemical micro drilling using ul tra short pulses［J］. Precision Engineering, 2004，28（2）:129-134. ［9］ Kurita T，Chikamori K，Kubota S，et al. A study of three-dimensional shape machining with an ECμM system［J］. International Journal of Machine Too ls and Manufacture，2006，46 (12-13)：1311-1318. ［10］ 张朝阳，朱荻，王明环. 纳秒脉冲微细电化学加工的理论及试验［J］. 机 械工程学报，2007，（1）：208-213. ZHANG Zhao-yang, ZHU Di, WANG Ming-huan. Theoretical and experimental research into electrochemical micro-machining using nanosecond pulses［J］. Chinese Jou rnal of Mechanical Engineering, 2007, (1)：208-213. (in Chinese) ［11］ Zhao W S，Li X H，Wang Z L. Study on micro electro-chemical machining at micro to meso-scale［C］∥Proceedings of the 1st IEEE Internation al Conference on Nano/Micro Engineered and Molecular Systems，Zhuhai：NEMS，2006 ，（1）：325-329. ［12］ 王明环，朱荻，张朝阳.电化学腐蚀法加工微圆柱体［J］.机械工程学报， 2006, 42(6)：128-132. WANG Ming-huan，ZHU Di，ZHANG Zhao-yang. Fabrication of micro-pin based on el ectrochemical etchining［J］. Chinese Journal of Mechanical Engineering，2006, 4 2(6)：128-132. (in Chinese) ［13］ Chi Q，Zhang J，Friis E P，et al. Creating nanoscale pits on solid s urfaces in aqueous environment with scanning tunnelling microscopy［J］. Surface Science，2000，463（2）： L641-L648. ［14］ Kim B H，Na C W，Lee Y S，et al. Micro electro-chemical machining o f 3D Micro structure using dilute sulfuric acid［J］. CIRP Annals-Manufacturing Technology，2005， 54（1）：191-194.
京公网安备11010802024360号 京ICP备05059581号-4