融合仿真数据的小子样圆概率误差评估

doi:10.3969/j.issn.1000-1093.2021.02.016

摘要/Abstract

摘要： 针对应用Bayes方法评估圆概率误差（CEP）时仿真数据容易“淹没”现场实弹数据，导致评估结果无效甚至错误的问题，提出一种基于“有效样本”的飞行与仿真数据融合算法与融合仿真数据的小子样CEP评估方法。使用重要性抽样方法中抽样效率的评估模型度量仿真先验分布与总体分布之间的偏差，建立考虑仿真先验信息有偏差时仿真先验分布的确定方法。该方法在融合评估时仿真样本权重同时依据仿真先验分布与总体分布之间的偏差和样本量调整，而不是原方法中仅仅依赖验前试验的试验次数分配。实验和应用案例表明，新方法的估计性能显著好于传统方法，可以有效解决装备鉴定和定型试验中小子样CEP评估问题。

关键词: 装备鉴定和定型试验, 圆概率误差, 试验数据融合, Bayes方法, 小子样试验

Abstract: When Bayes method is used to evaluate the circular error probable (CEP), the simulation data is easy to “submerge” the live ammunition flight test data, which often leads to the ineffectiveness or even mistake of evaluated results. To solve this problem, a flight and simulation data fusion algorithm based on “effective sample” and a small sample CEP evaluation method for fusing simulation data and flight data are proposed. The evaluation model of sampling efficiency in importance sampling method is used to measure the deviation between the simulation prior distribution and the overall distribution, and the simulation prior distribution considering the deviation of simulation prior information is established. In the process of fusion evaluation, the weights of simulation samples are calculated according to the deviation between the prior distribution and the overall distribution and the sample size, instead of the original method only relying on the test times of prior test. Experiments and application cases show that the proposed method is significantly better than the traditional method in CEP estimation, which can effectively solve the problem of small sample CEP evaluation in equipment evaluation and validation test.

Key words: equipmentevaluationandvalidationtest, circularerrorprobable, testdatafusion, Bayesmethod, smallsampletest

中图分类号:

TJ765.4⁺3

宁小磊，吴颖霞，赵新. 融合仿真数据的小子样圆概率误差评估[J]. 兵工学报, 2021, 42(2): 388-398.

NING Xiaolei, WU Yingxia， ZHAO Xin. Small Sample Circular Error Probable Estimation Based on Fusing Simulation and Flight Test Data[J]. Acta Armamentarii, 2021, 42(2): 388-398.

参考文献

［1］井沛良, 段宇, 韩超, 等. 基于高斯混合模型和期望最大化算法的非高斯分布圆概率误差估计方法研究［J］. 兵工学报, 2019, 40(2): 369-376.
JING P L, DUAN Y, HAN C, et al. Circular error probable estimation method based on Gaussian mixture model and expectation maximum algorithm for non-Gaussian distribution［J］. Acta Armamentarii, 2019, 40(2): 369-376.(in Chinese)
［2］张金槐,唐雪梅.Bayes方法［M］.修订版.长沙:国防科技大学出版社,1993:1-3,54-57.
ZHANG J H,TANG X M.Bayes method［M］.Revised edition.Changsha: National University of Defense Technology Press,1993:1-3,54-57.(in Chinese)
［3］陈维义, 程晗, 刘国强, 等. 考虑仿真可信度的舰炮射击精度贝叶斯估计［J］. 系统工程与电子技术, 2018, 40(11): 2598- 2603.
CHEN W Y, CHENG H, LIU G Q, et al. Bayesian estimation for naval gun's firing accuracy considering reliability of simulation［J］. Systems Engineering and Electronics, 2018, 40(11): 2598- 2603.(in Chinese)
［4］孙锦, 李国林, 许诚. 基于仿真信息的反舰导弹小子样靶场试验综合评定方法［J］. 系统工程理论与实践, 2014, 34(4): 1077-1088.
SUN J, LI G L, XU C. Synthetical evaluation method of anti-ship missile in range trial in condition of small sample based on simulation information［J］. Systems Engineering-Theory & Practice, 2014, 34(4): 1077-1088. (in Chinese)
［5］黄寒砚,段晓君,王正明.考虑先验信息可信度的后验加权Bayes估计［J］.航空学报,2008,29(5):1245-1251.
HUANG H Y, DUAN X J,WANG Z M. A novel posterior weighted estimation method considering the credibility of prior information［J］. Acta Aeronautica et Astronautica Sinica, 2008, 29(5):1245-1251.(in Chinese)
［6］杨华波,夏青,张士峰,等.Bayes修正幂验前方法在制导精度评定中的应用［J］.宇航学报,2009,30(6):2237-2242.
YANG H B, XIA Q, ZHANG S F, et al.A Bayesian modified power prior approach with application in guidance precision evaluation［J］.Journal of Aeronautics, 2009, 30(6): 2237-2242. (in Chinese)
［7］段晓君,黄寒砚.基于信息散度的补充样本加权融合评估［J］. 兵工学报, 2007, 28(10): 1276-1280.
DUAN X J, HUANG H Y. Weighted Bayesian fusion evaluation based on information divergence of prior sample［J］. Acta Armamentarii, 2007, 28(10): 1276-1280. (in Chinese)
［8］段晓君,王刚.基于复合等效可信度加权的Bayes融合评估方法［J］.国防科技大学学报,2008,30(3):90-94.
DUAN X J, WANG G. Weighted Bayesian fusion evaluation basing on composite equivalency model ［J］.Journal of National University of Defense Technology, 2008,30(3):90-94.(in Chinese)
［9］杨华波,张士峰,蔡洪.利用构造性仿真进行导弹精度评估［J］.国防科技大学学报,2005,27(2):27-30.
YANG H B, ZHANG S F, CAI H. Evaluation of missile precision by using construction simulation［J］. Journal of National University of Defense Technology, 2005, 27(2): 27-30. (in Chinese)
［10］闫志强,蒋英杰,宫二玲, 等.基于修正权值混合验后的导弹精度融合评估［J］.系统工程与电子技术, 2011, 33(3):712- 716.
YAN Z Q, JIANG Y J, GONG E L, et al. Synthetic evaluation of missile precision based on mixed posteriors with modified weights［J］. Systems Engineering and Electronics,2011,33(3):712-716. (in Chinese)
［11］唐雪梅,张金槐,邵凤昌.武器装备小子样试验分析与评估［M］.北京:国防工业出版社, 2001: 1-3.
TANG X M, ZHANG J H, SHAO F C. Test analysis and evaluation of weapon systems in small-sample circumstances［M］. Beijing: National Defense Industry Press, 2001: 1-3. (in Chinese)
［12］梁彦,潘泉,杨峰,等.复杂系统的现代估计理论及应用［M］.北京:科学出版社,2009:170-177.
LIANG Y, PAN Q, YANG F,et al. Model estimation theory of complex system and its application［M］. Beijing: Science Press, 2009:170-177. (in Chinese)
［13］黄小平,王岩,缪鹏程.粒子滤波原理及应用［M］.北京:电子工业出版社,2017:89-92.
HUANG X P, WANG Y, MIU P C. Particle filter principle and applications ［M］.Beijing: Publishing House of Electronics Industry, 2017:89-92. (in Chinese)
［14］郭永红,宋彪,赵东阳,等. 基于极限学习机模型的粒子滤波无设备定位方法研究［J］.兵工学报,2019,40(8):1740-1746.
GUO Y H, SONG B, ZHAO D Y, et al. Research on extreme learning machine model-based particle filter tracking method for device-free localization［J］. Acta Armamentarii, 2019, 40(8): 1740-1746. (in Chinese)
［15］刘军.科学计算中的蒙特卡罗策略［M］. 北京:高等教育出版社, 2013:23-29.
LIU J. Monte Carlo strategy in scientific calculation［M］. Beijing: Higher Education Press, 2013:23-29. (in Chinese)
［16］ GEWEKE J. Bayesian inference in econometrics model using Monte Carlo integration［J］. Econometrica, 1989, 57(6): 1317- 1339.

[1]	井沛良，段宇，韩超，郭荣化，宁小磊，刘瑜. 基于高斯混合模型和期望最大化算法的非高斯分布圆概率误差估计方法研究[J]. 兵工学报, 2019, 40(2): 369-376.
[2]	张文杰，杨华波，张士峰. 基于Bayes混合验前分布的成败型产品可靠性评估[J]. 兵工学报, 2016, 37(3): 505-511.
[3]	刘海涛，张志华，董理. 成败型产品可靠性的Bayes验收方案研究[J]. 兵工学报, 2016, 37(3): 565-569.
[4]	谭源源，张春华，陈循. 基于狄氏先验分布的机电产品主要失效模式贝叶斯分析[J]. 兵工学报, 2012, 33(2): 209-213.
[5]	刘君，李庆民，张志华. Bayes小子样分析在武器性能评估中的应用[J]. 兵工学报, 2008, 29(9): 1114-1117.
[6]	明志茂，陶俊勇，陈循，张云安. 基于混合Beta分布的成败型产品Bayes可靠性鉴定试验方案研究[J]. 兵工学报, 2008, 29(2): 204-207.
[7]	徐军辉，汪立新，钱培贤. 基于贝叶斯方法的捷联惯性测量组合历次测试数据分布研究[J]. 兵工学报, 2007, 28(7): 859-862.
[8]	杨宇航，李志忠，郑力. 基于仿真的某型号车辆底盘可信性评估[J]. 兵工学报, 2006, 27(3): 390-393.
[9]	王玮，王军波，黄景德. 一个可靠性二次抽样方案的分析及改进[J]. 兵工学报, 2006, 27(2): 360-362.
[10]	张士峰，夏胜平，贾沛然. 导弹落点精度的综合评定方法[J]. 兵工学报, 2002, 23(2): 255-257.