海上柔性并联平台空间动力学建模与分析

doi:10.3969/j.issn.1000-1093.2017.03.013

摘要/Abstract

摘要： 针对某海上螺旋副-虎克铰-球铰(HUS)柔性并联平台由快速稳定和大负载引起的支撑连杆弹性变形和负载瞄准位置偏差问题，进行了空间弹性动力学建模。采用模态函数和空间等截面梁单元模型对弹性连杆进行空间建模，基于虎克铰和球铰连接的连杆为两自由度空间运动，推导了空间单元坐标与系统坐标的两自由度转换矩阵，利用平台的运动学和动力学约束条件建立了HUS柔性并联平台的空间弹性动力学方程；运用Newmark方法对弹性动力学方程进行离散求解，分析了平台的弹性动力学响应和支撑连杆的最大动应力，并进行了动力学测试实验；进一步分析了弹性变形对负载瞄准精度的影响。研究结果表明：由弹性变形引起的支撑点最大位移为2.45 mm，且x轴明显大于y轴和z轴；由弹性角位移引起最大位置偏差为1.35 m. 实验结果与仿真结果一致，验证了数值建模的有效性。

关键词: 机械学, 柔性并联机构, 空间动力学建模, 弹性变形, 弹性连杆

Abstract: The space elastic dynamic modelling of parallel platform is created for the elastic deformation and the load pointing displacement error of support link due to the rapid stabilization and large load of offshore HUS flexible parallel platform. Space elastic link is modelled by modal function and space equal section beam element model. The link based on hook joint and ball joint has two degrees of freedom space movement. The transformation matrix of two degrees of freedom between space element coordinate and system coordinate is derived. The kinematic and dynamic constraints of platform are used to establish the space elastic dynamic equations of HUS flexible parallel platform. The elastic dynamic equations are discretely solved by Newmark method. The elastic dynamic response of platform and the maximum dynamic stress of support link are analyzed. And the dynamic test experiment is conducted. The results show that the maximum displacement of support point by elastic deformation is 2.45 mm, and the error of axis x is significantly greater than those of axes y and z. Experimental results are consistent with the simulated results, thereby validating the effectiveness of the numerical model. The influence of elastic deformation on load pointing accuracy is analyzed, and the maximum position error due to elastic angular displacement is 1.35 m. Key

Key words: mechanics, flexibleparallelplatform, spacedynamicmodelling, elasticdeformation, elasticlink

中图分类号:

谢克峰，张合，刘善增，李豪杰. 海上柔性并联平台空间动力学建模与分析[J]. 兵工学报, 2017, 38(3): 512-519.

XIE Ke-feng, ZHANG He, LIU Shan-zeng, LI Hao-jie. Space Dynamic Modelling and Analysis of Offshore HUS Flexible Parallel Platform[J]. Acta Armamentarii, 2017, 38(3): 512-519.

参考文献

［1］王振宇, 张彪, 刘国华. 浮式海洋结构的应用与背景[J]．中国海洋平台, 2009, 24(1): 10-14.
WANG Zhen-yu, ZHANG Biao, LIU Guo-hua. Application and foreground of the floating structures[J]. China Offshore Platform, 2009, 24(1): 10-14. (in Chinese)
[2］卢其进, 杨和振. 海洋风电支撑结构的随机性动力优化设计[J]．振动与冲击, 2013, 32(17): 46-51.
LU Qi-jin, YANG He-zhen. Probabilistic dynamic optimization design for support structure of offshore wind turbines[J]. Journal of Vibration and Shock, 2013, 32(17): 46-51. (in Chinese)
[3］胡自伟, 陈晖, 刘江平. 踏浪精灵—水面无人舰艇[J]. 现代军事, 2004, 32(17): 46-51.
HU Zi-wei, CHEN Hui, LIU Jiang-ping. Sea elf—surface unmanned ships[J]. Modern Military, 2004, 32(17):46-51. (in Chinese)
[4］刘晓, 赵铁石, 边辉, 等. 大型舰载稳定平台机构及优化设计[J]. 机器人, 2013, 35(3): 339-345.
LIU Xiao, ZHAO Tie-shi, BIAN Hui, et al. Optimization design of a large-scale mechanism for ship-based stabilizing platform[J]. Robot, 2013, 35(3):339-345. (in Chinese)
[5］金振逸, 马少杰. 基于线性波浪理论的海上浮动平台受力及运动分析[J]. 四川兵工学报, 2011, 32(8): 135-137.
JIN Zhen-yi, MA Shao-jie. Analysis of force and motion of maritime floating platform based on linear wave theory[J]. Journal of Sichuan Ordnance, 2011, 32(8): 135-137.(in Chinese)
[6］赵亮. 一种2UPS-UPR并联机床的设计理论及关键技术研究[D]. 沈阳:东北大学, 2010.
ZHAO Liang. Study on design theory and key technology of 2UPS-UPR parallel machine tool[D]. Shenyang:Northeastern University, 2010. (in Chinese)
[7］胡胜海, 郭春阳, 余伟, 等. 基于变胞原理的舰炮装填机构刚-柔耦合动力学建模及误差分析[J]. 兵工学报, 2015, 36(8): 1398-1404.
HU Hai-sheng, GUO Chun-yang, YU Wei, et al. Rigid-flexible coupling dynamic modeling and error analysis of loading mechanism of naval gun based on metamorphic principle[J]. Acta Armamentarii, 2015, 36(8): 1398-1404. (in Chinese)
[8］张绪平, 余跃庆. 综合考虑关节及杆柔性的空间机器人动力学分析[J]. 机械科学与技术, 1998, 17(5): 775-778.
ZHANG Xu-ping, YU Yue-qing. Dynamic analysis of spatial manipulators considering joint and link flexibility[J]. Mechanical Science and Technology, 1998, 17(5):775-778. (in Chinese)
[9］陈江义, 郝雪清, 范利格, 等. 计入构件柔性和铰链间隙的并联机构动力学分析[J]. 机床与液压, 2013, 41(23): 28-31.
CHEN Jiang-yi, HAO Xue-qing, FAN Li-ge, et al. Dynamic analysis of parallel mechanism with clearance revolute joint and flexible component[J]. Machine Tool and Hydraulics, 2013, 41(23): 28-31. (in Chinese)
[10］吕帮俊, 彭利坤, 熊先锋. 考虑构件弹性的电动Stewart并联机构刚度建模与仿真[J]. 振动与冲击, 2013, 32(12): 135-149.
LYU Bang-jun, PENG Li-kun, XIONG Xian-feng. Stiffness modeling and simulation for an electric Stewart parallel mechanism considering elasticity of components[J]. Journal of Vibration and Shock, 2013, 32(12): 135-149. (in Chinese)
[11］谢克峰, 张合, 李豪杰, 等. 海上漂浮2-HUS/U并联平台动力学分析[J]. 农业机械学报, 2016, 47(1): 362-368.
XIE Ke-feng, ZHANG He, LI Hao-jie, et al. Dynamic analysis of offshore floating 2-HUS/U parallel platform[J]. Transactions of the Chinese Society for Agricultural Machinery, 2014, 45(3): 293-298. (in Chinese)
[12］李珂翔, 张合. 并联光电跟踪平台建模与工作空间闭环控制[J]. 农业机械学报, 2014, 45(3): 293-298.
LI Ke-xiang, ZHANG He. Modelling and closed-loop control in workspace of parallel optoelectronic tracking platform[J]. Transactions of the Chinese Society for Agricultural Machinery, 2014, 45(3): 293-298. (in Chinese)
[13］落海伟, 张俊, 王辉, 等. 3-RPS并联机构弹性动力学建模方法[J]. 机器人, 2014, 36(6): 737-743, 750.
LUO Hai-wei, ZHANG Jun, WANG Hui, et al. An elastodynamic modelling for a 3-RPS parallel kinametic machine[J]. Robot, 2014, 36(6): 737-743, 750. (in Chinese)
[14］ Wang X Y, Mills J K. Dynamic modelling of a flexible-link planar parallel platform using a substructuring approach[J]. Mechanism and Machine Theory, 2006, 41(6): 671-687.
[15］张清华, 张宪民. 平面3-RRR柔性并联机器人动力学建模与分析[J]. 振动工程学报, 2013, 26(2): 239-245.
ZHANG Qing-hua, ZHANG Xian-min. Dynamic modeling and analysis of planar 3-RRR flexible parallel robots[J]. Journal of vibration Engineering, 2013, 26(2): 239-245. (in Chinese)
[16］ Piras G, Cleghom W L. Dynamic finite-element analysis of a planner high-speed, high-precision parallel manipulator with flexible links[J]. Mechanism and Machine Theory, 2005, 40(7): 849-862.
[17］刘善增, 余跃庆, 杨建新, 等. 3-RRC并联柔性机器人的动力学分析[J]. 振动与冲击, 2008, 27(2): 157-161, 184.
LIU Shan-zeng, YU Yue-qing, YANG Jian-xin, et al. Dynamic analysis of a 3-RRC parallel flexible manipulator[J]. Journal of Vibration and Shock, 2008, 27(2): 157-161, 184. (in Chinese)
[18］ Xue M D, Duan J, Xiang Z H. Thermally-induced bending- torsion coupling vibration of large scale space structures[J]. Computational Mechanics, 2007, 40(4):707-723.

第38卷
第3期2017 年3月兵工学报ACTA
ARMAMENTARIIVol.38No.3Mar.2017

[1]	刘德红，徐庆林，王向军. 腐蚀缺陷对921A钢力学-电化学性能的影响[J]. 兵工学报, 2022, 43(11): 2905-2915.
[2]	陈尔康，廖欣，高长生，荆武兴. 考虑刚体运动与弹体变形耦合效应的旋转导弹动力学建模[J]. 兵工学报, 2018, 39(11): 2159-2171.
[3]	邱明，周大威，庞晓旭. 织物衬垫编织工艺对自润滑关节轴承摩擦学性能的影响[J]. 兵工学报, 2017, 38(9): 1867-1872.
[4]	曲梦可，王洪波，荣誉. 轮腿混合机器人机械腿动力学建模与驱动预估[J]. 兵工学报, 2017, 38(8): 1619-1629.
[5]	黄大荣, 陈长沙，孙国玺，赵玲，米波. 复杂装备轴承多重故障的线性判别分析与反向传播神经网络协作诊断方法[J]. 兵工学报, 2017, 38(8): 1649-1657.
[6]	牛荣军，徐金超，邵秀华，邓四二. 双排非对称四点接触球转盘轴承刚度分析[J]. 兵工学报, 2017, 38(6): 1239-1248.
[7]	谢宏伟，陶忠，侯军占，张卫国. 多绳精密传动的传动精度实验研究[J]. 兵工学报, 2017, 38(4): 728-734.
[8]	胡俊峰，蔡建阳. 基于振动控制的微小物体释放操作方法与实验研究[J]. 兵工学报, 2017, 38(4): 802-809.
[9]	李志农，朱明. 基于变分模态分解的机械故障诊断方法研究[J]. 兵工学报, 2017, 38(3): 593-599.
[10]	李世尧，张卫国，侯军占，段文博，迟圣威，郭冰涛. 减振器动刚度特性研究[J]. 兵工学报, 2017, 38(11): 2274-2279.
[11]	邱明，梁霞, 李迎春. 注塑改性尼龙杆端关节轴承的摩擦学性能[J]. 兵工学报, 2017, 38(10): 2075-2080.
[12]	李豪杰，张合，李珂翔，谢克峰. 考虑铰链间隙的水面并联稳定平台动力学分析[J]. 兵工学报, 2017, 38(1): 129-134.
[13]	黄泽好，刘通，雷伟，万鑫. 盘式制动器噪声、振动与声振粗糙度特性的复模态评价[J]. 兵工学报, 2016, 37(7): 1275-1281.
[14]	卢志伟，马方杰，刘波，张君安. 静压止推气浮轴承动特性的微扰动法研究[J]. 兵工学报, 2016, 37(1): 150-155.
[15]	邓四二，贾永川. 推力球轴承摩擦力矩特性研究[J]. 兵工学报, 2015, 36(9): 1615-1623.