基于变分模态分解的机械故障诊断方法研究

doi:10.3969/j.issn.1000-1093.2017.03.024

摘要/Abstract

摘要： 变分模态分解(VMD)是一种新的自适应信号分解方法，该方法的核心思想是假设每个模态的绝大部分都是紧紧围绕在某一中心频率周围的，然后将模态带宽的求解问题转化为约束优化问题，求解出每个模态。将VMD引入到机械故障诊断中，提出一种基于VMD的机械故障诊断方法，并与集合经验模态分解(EEMD)方法进行对比分析。仿真结果表明：VMD方法明显优于EEMD方法，能有效地分解出信号的固有模态；与EEMD方法相比较，该方法模态混叠现象弱，计算效率高，理论充分。将VMD方法成功地应用到转子不同碰摩严重程度的故障数据分析实验中，实验结果进一步验证了该方法的有效性，能够揭示出碰摩故障数据的频率结构，区分碰摩故障的严重程度。

关键词: 机械学, 变分模态分解, 故障诊断, 集合经验模态分解, 转子碰摩

Abstract: Variational mode decomposition (VMD) is a new adaptive signal decomposition method. The idea of this method is that most of each mode is assumed to be tightly around a center frequency, the solving problem of mode bandwidth is converted into an optimization problem with the constrain conditions, and finally each modal is solved. VMD is introduced into the mechanical fault diagnosis, and a fault diagnosis method based on VMD is proposed. The proposed method is compared with the ensemble empirical mode decomposition (EEMD). The simulated result shows VMD method is superior to EEMD method, the intrinsic mode of signal can be effectively decomposed by the VMD method. Compared with the EEMD method, the proposed method has some distinct advantages, such as weak mode mixing phenomenon, high calculation efficiency and sufficient theory. The proposed method has been successfully applied to the rub-impact fault diagnosis of rotor system. The experimental results show that the proposed method is effective, and can effectively reveal the frequency structure in rubbing fault and discern the severity of rub-impact fault. Key

Key words: mechanics, variationalmodedecomposition, faultdiagnosis, ensembleempiricalmodedecomposition, rotorrubbing

中图分类号:

TH165⁺.3

李志农，朱明. 基于变分模态分解的机械故障诊断方法研究[J]. 兵工学报, 2017, 38(3): 593-599.

LI Zhi-nong, ZHU Ming. Research on Mechanical Fault Diagnosis Method Based on Variational Mode Decomposition[J]. Acta Armamentarii, 2017, 38(3): 593-599.

参考文献

［1］ Huang N E, Shen Z, Long S R, et al. The empirical mode decomposition and the Hilbert spectrum for nonlinear and non-stationary time series analysis［J］. Proceedings of the Royal Society of London A, 1998, 454: 903-995.
［2］ Dybaa J, Zimroz R. Rolling bearing diagnosing method based on empirical mode decomposition of machine vibration signal［J］. Applied Acoustics, 2014, 77(3): 195-203.
［3］ Singh S, Kumar N. Combined rotor fault diagnosis in rotating machinery using empirical mode decomposition［J］. Journal of Mechanical Science and Technology, 2014, 28(12): 4869-4876.
［4］ Guo W, Peter W T. A novel signal compression method based on optimal ensemble empirical mode decomposition for bearing vibration signals［J］. Journal of sound and vibration, 2013, 332(2): 423-441.
［5］ Lu L, Yan J, de Silva C W. Dominant feature selection for the fault diagnosis of rotary machines using modified genetic algorithm and empirical mode decomposition［J］. Journal of Sound and Vibration, 2015, 344(5): 464-483.
［6］ Jiang F, Zhu Z, Li W, et al. Fault diagnosis of rotating machinery based on noise reduction using empirical mode decomposition and singular value decomposition［J］. Journal of Vibroengineering, 2015, 17(1): 164-174.
［7］ Yu D, Yang Y, Cheng J. Application of time–frequency entropy method based on Hilbert–Huang transform to gear fault diagnosis［J］. Measurement, 2007, 40(9): 823-830.
［8］ Peng Z K, Peter W T, Chu F L. A comparison study of improved Hilbert–Huang transform and wavelet transform: application to fault diagnosis for rolling bearing［J］. Mechanical Systems and Signal Processing, 2005, 19(5): 974-988.
［9］王玉静, 姜义成, 康守强, 等. 基于优化集合 EMD 的滚动轴承故障位置及性能退化程度诊断方法［J］. 仪器仪表学报, 2013, 34(8): 1834-1840.
WANG Yu-jing, JIANG Yi-cheng, KANG Shou-qiang, et al. Diagnosis method of fault location and performance degradation degree of rolling bearing based on optimal ensemble EMD［J］. Chinese Journal of Scientific Instrument, 2013, 34(8):1834-1840. (in Chinese)

［10］姜万录, 刘云杰, 朱勇. 小波脊线解调与两次 EMD 分解相结合的故障识别方法及应用研究［J］. 仪器仪表学报, 2013, 34(5): 1131-1138.
JIANG Wan-lu, LIU Yun-jie, ZHU Yong. Research on wavelet ridge demodulation and twice EMD-based fault identification method and its application［J］. Chinese Journal of Scientific Instrument, 2013, 34(5): 1131-1138. (in Chinese)
［11］ Li Y, Xu M, Wei Y, et al. An improvement EMD method based on the optimized rational Hermite interpolation approach and its application to gear fault diagnosis［J］. Measurement, 2015, 63(3): 330-345.
［12］ Yu Y L, Li W, Sheng D R, et al. A novel sensor fault diagnosis method based on modified ensemble empirical mode decomposition and probabilistic neural network［J］. Measurement, 2015, 68(5): 328-336.
［13］李志农, 朱明, 褚福磊,等. 基于经验小波变换的机械故障诊断方法研究［J］. 仪器仪表学报, 2014, 35(11): 2423-2432.
LI Zhi-nong, ZHU Ming, CHU Fu-lei, et al. Mechanical fault diagnosis method based on empirical wavelet transform［J］. Chinese Journal of Scientific Instrument, 2014, 35(11): 2423-2432. (in Chinese)
［14］程军圣,于德介,杨宇. 基于支持矢量回归机的Hilbert-Huang变换端点效应问题的处理方法［J］. 机械工程学报, 2006, 42(4): 23-31.
CHENG Jun-sheng, YU De-jie, YANG Yu. Process method for end effects of Hilbert-Huang transform based on support vector regression machines［J］. Journal of Mechanical Engineering, 2006, 42(4): 23-31. (in Chinese)
［15］ Xu G L, Wang X T, Xu X G, et al. Improved EMD for the analysis of FM signals［J］. Mechanical Systems and Signal Processing, 2012, 33(11): 181-196.
［16］ Wu Z, Huang N E. Ensemble empirical mode decomposition: a noise-assisted data analysis method［J］. Advances in Adaptive Data Analysis, 2009, 1(1): 1-41.
［17］ Dragomiretskiy K, Zosso D. Variational mode decomposition［J］. IEEE Transactions on Signal Processing, 2014, 62(3): 531-544.
［18］褚福磊, 彭志科, 冯志鹏, 等. 机械故障诊断中的现代信号处理方法［M］. 北京:科学出版社, 2009.
CHU Fu-lei, PENG Zhi-ke, FENG Zhi-peng, et al. Modern signal processing method for mechanical fault diagnosis［M］. Beijing: Science Press, 2009. (in Chinese)
［19］朱明, 李志农, 何旭平, 等. 广义S变换在转子碰摩故障诊断中的应用研究［J］. 华侨大学学报, 2014, 35(2): 127-131.
ZHU Ming, LI Zhi-nong, HE Xu-ping, et al. Application of generalized S transform in rotor rub-impact fault diagnosis［J］. Journal of Huaqiao University, 2014, 35(2): 127-131. (in Chinese)
［20］ Peng Z K, Chu F L, Tse P W. Singularity analysis of the vibration signals by means of wavelet modulus maximal method［J］. Mechanical Systems and Signal Processing, 2007, 21(2):780-794.

第38卷
第3期2017 年3月兵工学报ACTA
ARMAMENTARIIVol.38No.3Mar.2017

[1]	李良钰，苏铁熊，马富康，吴小军，徐春龙. 基于集合经验模态分解-支持向量机的高压共轨系统故障诊断方法[J]. 兵工学报, 2022, 43(5): 992-1001.
[2]	李志农, 胡志峰, 毛清华, 张旭辉, 陶俊勇. 非线性调频模态分解-同步提取变换方法及其在滚动轴承故障诊断中的应用[J]. 兵工学报, 2021, 42(6): 1324-1330.
[3]	朱敏，许爱强，许晴，李睿峰. 基于改进多层核超限学习机的模拟电路故障诊断[J]. 兵工学报, 2021, 42(2): 356-369.
[4]	李佳蔚，崔涛，刘宇航，师帅楠，孙强. 基于排气温度动态模型的在线观测器研究[J]. 兵工学报, 2019, 40(8): 1562-1571.
[5]	郭伟超，赵怀山，李成，李言，汤奥斐. 基于小波包能量谱与主成分分析的轴承故障特征增强诊断方法[J]. 兵工学报, 2019, 40(11): 2370-2377.
[6]	翟禹尧，史贤俊，吕佳朋. 基于广义随机Petri网的导弹系统测试性建模与指标评估方法研究[J]. 兵工学报, 2019, 40(10): 2070-2079.
[7]	杨大为，赵永东，冯辅周，江鹏程，丁闯. 基于参数优化变分模态分解和多尺度熵偏均值的行星变速箱故障特征提取[J]. 兵工学报, 2018, 39(9): 1683-1691.
[8]	张伟，刘星，许爱强，平殿发. l_p范数约束的模拟电路3层多核故障诊断模型[J]. 兵工学报, 2018, 39(7): 1352-1363.
[9]	任海锋，潘宏侠. 基于多分形特征的枪械自动机裂纹故障诊断[J]. 兵工学报, 2018, 39(3): 457-462.
[10]	邱明，周大威，庞晓旭. 织物衬垫编织工艺对自润滑关节轴承摩擦学性能的影响[J]. 兵工学报, 2017, 38(9): 1867-1872.
[11]	王英敏，崔涛，张付军，董天普. 基于局部线性模型树模型的柴油机进气系统漏气和堵塞故障诊断[J]. 兵工学报, 2017, 38(8): 1457-1468.
[12]	曲梦可，王洪波，荣誉. 轮腿混合机器人机械腿动力学建模与驱动预估[J]. 兵工学报, 2017, 38(8): 1619-1629.
[13]	黄大荣, 陈长沙，孙国玺，赵玲，米波. 复杂装备轴承多重故障的线性判别分析与反向传播神经网络协作诊断方法[J]. 兵工学报, 2017, 38(8): 1649-1657.
[14]	牛荣军，徐金超，邵秀华，邓四二. 双排非对称四点接触球转盘轴承刚度分析[J]. 兵工学报, 2017, 38(6): 1239-1248.
[15]	谢宏伟，陶忠，侯军占，张卫国. 多绳精密传动的传动精度实验研究[J]. 兵工学报, 2017, 38(4): 728-734.