[1] 张景旭. 地基大口径望远镜系统结构技术综述[J]. 中国光学, 2012, 5(4): 327-336.
ZHANG Jing-xu. Overview of structure technologies of large aperture ground-based telescopes[J]. Chinese Optics, 2012, 5(4):
327-336. (in Chinese)
[2] Kuriyagawa T, Zahmaty M S S, Syoji K. A new grinding method
for aspheric ceramic mirrors[J]. Journal of Materials Processing Technology, 1996, 62(4): 387-392.
[3] 韩成顺, 董申. 超精密磨削大型光学非球面元件的研究[J].光电工程, 2003, 30(6): 43-46.
HAN Cheng-shun, DONG Shen. Study on ultra- precision grinding of large optical aspherical elements[J]. Opto-Electronic Engineering, 2003, 30(6): 43-46. (in Chinese)
[4] 刘振宇. 应用组合加工技术加工2 m口径非球面碳化硅反射镜[J]. 光学学报, 2015, 35(A01): 344-350.
LIU Zhen-yu. Grinding 2 m diameters aspheric SiC mirror with multi-mode optimization technique[J]. Acta Optica Sinica, 2015, 35(A01): 344-350. (in Chinese)
[5] 许乔, 王健, 马平, 等. 先进光学制造技术进展[J]. 强激光与粒子束. 2013, 25(12): 3098-3105.
XU Qiao, WANG Jian, MA Ping, et al. Progress of advanced optical manufacturing technology[J]. High Power Laser and Particle Beams, 2013, 25(12): 3098- 3105. (in Chinese)
[6] 胡德金. 环状内外球面智能精密磨削方法与控制模型研究[J]. 兵工学报, 2015, 36(9): 1743-1749.
HU De-jin. Research on intelligent precision grinding method and control model of annular inner and outer sphere[J]. Acta Armamentarii, 2015, 36(9): 1743-1749. (in Chinese)
[7] 胡德金. 二次旋转曲面精密磨削原理与运动控制方法研究[J]. 机械工程学报, 2014, 50(13): 178-183.
HU De-jin. Study on principle and control method for precisely grinding quadratic rotated conicoid[J]. Chinese Journal of Mechanical Engineering, 2014, 50(13): 178-183. (in Chinese)
[8] 胡德金,郁翔, 李峰, 等. 精密磨削与检测一体化电主轴:中国, CN104551981A [P]. 2015-04-29.
HU De-jin, YU Xiang, LI Feng, et al. Precision grinding and detection integrated electric spindle: China, CN104551981A [P]. 2015-04-29. (in Chinese) |