换能器电学性能与振动切削力关系及监测方法

兵工学报 ›› 2011, Vol. 32 ›› Issue (2): 199-203.

换能器电学性能与振动切削力关系及监测方法

李文，张文全，张德远

(北京航空航天大学机械工程及自动化学院, 北京 100191)

收稿日期:2010-07-14 修回日期:2010-07-14 上线日期:2014-05-04
通讯作者: 李文 E-mail:buaa_liwen@126.com
作者简介:李文(1975—)，男，博士研究生

Monitoring Methods and Relationship Between Piezoelectric Transducer Electrical Characteristics andVibration Cutting Force

LI Wen， ZHANG Wen-quan， ZHANG De-yuan

(School of Mechanical Engineering and Automation, Beihang University, Beijing 100191, China)

Received:2010-07-14 Revised:2010-07-14 Online:2014-05-04
Contact: LI Wen E-mail:buaa_liwen@126.com

摘要/Abstract

摘要： 振动切削加工过程中监测切削力对于超声振动切削技术的推广和加工生产具有重要意义。本文在换能器驱动技术分析的基础上，通过研究超声椭圆振动切削过程中切削力、换能器电学阻抗与负载的变化关系，提出了一种利用换能器电学特性来判断超声椭圆振动切削力的新监测方法，并设计了一套换能器电学参数测量系统。通过大量的切削实验，验证了基于换能器电学特性的振动切削力监测方法的可行性。

关键词: 机械工程, 切削力, 换能器, 电学特性

Abstract: The monitoring of cutting force has a great significance in promotion and processing of ultrasonic vibration cutting technology in vibration cutting process. On the basis of the research on the relationship among cutting force, transducer electrical impedance and load, a new monitoring method which uses the transducer electrical properties to reflect the cutting force of ultrasonic elliptic vibration cutting is proposed, and a transducer electrical properties measurement system is designed.The feasibility of cutting force monitoring based on piezoelectric transducer electrical properties is proved by the cutting experiments.

Key words: mechanical engineering, cutting force, transducer, electrical characteristics

中图分类号:

TH165.3

李文，张文全，张德远. 换能器电学性能与振动切削力关系及监测方法[J]. 兵工学报, 2011, 32(2): 199-203.

LI Wen， ZHANG Wen-quan， ZHANG De-yuan. Monitoring Methods and Relationship Between Piezoelectric Transducer Electrical Characteristics andVibration Cutting Force[J]. Acta Armamentarii, 2011, 32(2): 199-203.

参考文献

［1］徐春广，王信义，肖定国. 切削状态在线监测的新方法[J].北京理工大学学报，1994，14(1)：49-51.
XU Chun-guang，WANG Xin-yi，XIAO Ding-guo. A new method for the on-line monitoring of tool state[J]. Journal of Beijing Institute of Technology，1994，14(1)：49-51. (in Chinese)
［2］冯冀宁，刘彬，刁哲军. 基于小波神经网络的切削刀具状态监测[J].中国机械工程，2004，15:321-324.
FENG Ji-ning，LIU Bin，DIAO Zhe-jun. Condition detection on cutting tools wavelet-based neural network[J]. China Mechanical Engineering,2004，15:321-324. (in Chinese)
［3］高宏利，许明恒. 基于动态树理论的刀具磨损监测技术[J]. 机械工程学报,2006, 42(7):227-230.
GAO Hong-li, XU Ming-heng. Tool wear monitoring based on dynamic tree[J]. Chinese Journal of Mechanical Engineering, 2006, 42(7):227-230. (in Chinese)
［4］刘献礼,袁哲俊. 切削温度测量的等效热电偶法[J]. 计量学报,1999, (3):187-192.
LIU Xian-li, YUAN Zhe-jun. The measurement of cutting temperature by equivalent themocouple methods[J]. Acta Metrologica Sinica, 1999, (3):187-192. (in Chinese)
［5］ Li Guang-jun, Han Feng-qi, Xu Yong-li, et al. On self-adaptive vibration tapping of titanium alloy[C]∥International Technology and Innovation Conference 2006, 2006: 236-240.
［6］ Li X Q, Wong Y S, Nee A Y C. Tool wear and chatter detection using the coherence function of two crossed accelerations[J]. International Journal of Machine Tools and Manufacture, 1997, 37(4): 425-435.
［7］吴博达，曲兴田. 刀具稳定性的在线监测[J].振动工程学报，1997，10(1)：71-75.
WU Bo-da，QU Xing-tian. On-line monitoring of cutting stability[J]. Journal of Vibration Engineering，1997，10(1)：71-75. (in Chinese)
［8］高天赋，曾娟，彭大勇. 压电陶瓷换能器宽带匹配特性分析[J]. 声学学报，2007，32(2)： 97-100.
GAO Tian-fu，ZENG Juan，PENG Da-yong. Analysis of characteristics of broadband matching for piezoelectric ceramic transducer[J]. Acta Acustica，2007，32(2)： 97-100. (in Chinese)
［9］ Gordon S K. Acoustic waves-devices, imaging, and analog signal processing[M]. New Jersey: Prentice Hall,1987:37-41.
［10］董震，闫久春，耿雪霏. 塑料超声波焊接负载阻抗模型及实时检测[J]. 焊接学报，1999,(S1)：51-55.
DONG Zhen，YAN Jiu-chun, GENG Xue-fei. On-line measurement of load impedance in ultrasonic plastic welding[J]. Journal of Welding，1999,(S1)： 51-55. (in Chinese)
［11］姜兴刚, 张德远. 超声换能器过固有谐振区匹配理论[J]. 机械工程学报，2007，43(3)： 182-186.
JIANG Xing-gang，ZHANG De-yuan. Matching theory of ultrasonic transducer at its passed inherent resonance zone[J]. Chinese Journal of Mechanical Engineering， 2007，43(3)： 182-186. (in Chinese)

[1]	张金，王学彬，石文泽，董子华，邓海飞. 大口径火炮身管药室内膛裂纹电磁超声表面水平剪切波检测方法[J]. 兵工学报, 2021, 42(8): 1763-1770.
[2]	索文超，许翔，耿飞. 基于计算流体力学的车辆发动机散热器芯部外形优化[J]. 兵工学报, 2017, 38(9): 1839-1844.
[3]	王英敏，崔涛，张付军，董天普. 基于局部线性模型树模型的柴油机进气系统漏气和堵塞故障诊断[J]. 兵工学报, 2017, 38(8): 1457-1468.
[4]	叶莹，赵振峰，符代桥, 张付军. 对置活塞轴向发动机同步运动机构空间圆柱凸轮的设计与优化[J]. 兵工学报, 2017, 38(5): 852-858.
[5]	岳广照，刘兴华，仇滔. 柴油机选择性催化还原系统氨泄漏及控制研究[J]. 兵工学报, 2017, 38(4): 634-642.
[6]	王增全，王正，兰银在，陈泽忠，侯新荣. 某型车用柴油机机体缝合螺栓的可靠性增长研究[J]. 兵工学报, 2017, 38(3): 433-439.
[7]	王宪成，赵文柱，和穆，杨绍卿，徐冬冬. 柴油机喷油器喷孔积碳对喷雾影响研究[J]. 兵工学报, 2017, 38(2): 218-226.
[8]	刘胜吉，赵宇超，刘荣利，王建，孙永福. 基于排放特性的小型风冷柴油机燃烧过程研究[J]. 兵工学报, 2017, 38(12): 2480-2487.
[9]	刘宇航，赵振峰，张付军，谢钊毅, 鲁怡，崔华盛. 对置活塞二冲程柴油机双喷油器碰撞喷雾试验研究[J]. 兵工学报, 2017, 38(10): 1881-1890.
[10]	仇滔，刘天翔，安晓东，雷艳，代贺飞. 高压共轨喷油器针阀开启与关闭过程规律研究[J]. 兵工学报, 2017, 38(10): 2069-2074.
[11]	商海昆，董长龙，何剑丰，樊丰，李萍，黄绵敦，谢亮. 二级增压柴油机压缩比和喷油提前角优化研究[J]. 兵工学报, 2017, 38(1): 20-26.
[12]	张栓录，赵长禄，钟科，赵振峰. 液压自由活塞柴油机的做功影响因素分析[J]. 兵工学报, 2016, 37(3): 394-399.
[13]	穆洪斌，魏巍，闫清东，刘城. 双循环圆液力缓速器叶片顶弧优化设计[J]. 兵工学报, 2016, 37(3): 400-407.
[14]	纪常伟，冯雨，汪硕峰，张擘，徐溥言，余梦辉. 添加剂对车载制氢机制氢效率影响的实验研究[J]. 兵工学报, 2016, 37(3): 570-576.
[15]	仇滔, 徐慧, 雷艳. 柴油机喷孔内空化过程及影响参数的试验研究[J]. 兵工学报, 2016, 37(11): 2114-2119.