[1] FAN R L, WU Y, CHEN M H, et al. Relationship among microstructure, mechanical properties and texture of TA32 titanium alloy sheets during hot tensile deformation[J]. Transactions of Nonferrous Metals Society of China, 2020, 30(4): 928-943. [2] ZHOU T F, WU J J, CHE J T, et al. Dynamic shear characteristics of titanium alloy Ti-6Al-4V at large strain rates by the split Hopkinson pressure bar test[J]. International Journal of Impact Engineering, 2017, 109:167-177. [3] QI L C, QIAO X L, HUANG L J, et al. Effect of structural stabi-lity on the stress induced martensitic transformation in Ti-10V-2Fe-3Al alloy[J]. Materials Science and Engineering A, 2019, 756: 381-388. [4] PEIRS J, VERLEYSEN P, DEGRIECK J, et al. The use of hat-shaped specimens to study the high strain rate shear behaviour of Ti-6Al-4V[J]. International Journal of Impact Engineering, 2010, 37(6): 703-714. [5] REN Y, ZHOU S M, WANG Z W. Influence of shock pre-strain on the dynamic mechanical behavior and adiabatic shearing failure of the Ti-6Al-4V alloy with lamellar microstructure[J]. Enginee-ring Failure Analysis, 2020, 111: 104500. [6] ALI A, CHEN P W, GUO Y S. Effects of microstructure on the dynamic properties of TA15 titanium alloy[J]. Mechanics of Materials, 2019, 137: 103121. [7] YANG H L, WANG D D, ZHU X J, et al. Dynamic compression-induced twins and martensite and their combined effects on the adiabatic shear behavior in a Ti-8.5Cr-l.5Sn alloy[J]. Materials Science and Engineering A, 2019, 759: 203-209. [8] XIAO J F, NIE Z H, TAN C W, et al. Effect of reverse β-to-ω transformation on twinning and martensitic transformation in a metastable β titanium alloy[J]. Materials Science and Engineering A, 2019, 759: 680-687. [9] ZHAN H Y, ZENG W D, WANG G, et al. Microstructural characteristics of adiabatic shear localization in a metastable beta tita-nium alloy deformed at high strain rate and elevated temperatures[J]. Materials Characterization, 2015, 102: 103-113. [10] SHARMA S, MAJILA A N, CHAVAN V M, et al. Deformation response of titanium alloy under static and dynamic loading[J]. Procedia Engineering, 2017, 173: 1894-1900. [11] ZENER C, HOLLOMON J H. Effect of strain rate upon plastic flow of steel[J]. Journal of Applied Physics, 1944, 15(1): 22-32. [12] RAN C, SHENG Z M, CHEN P W, et al. Effect of microstructure on the mechanical properties of Ti-5Al-5Mo-5V-1Cr-1Fe alloy[J]. Materials Science and Engineering A, 2020, 773: 138728. [13] 朱新杰, 范群波, 余洪, 等. Ti-4.5Mo-5.1Al-1.8Zr-1.1Sn-2.5Cr-2.9Zn 钛合金的动态力学性能及失效研究[J]. 稀有金属材料与工程, 2020, 49(4): 1235-1241. ZHU X J, FAN Q B, YU H, et al.Dynamic mechanical properties and failure of Ti-4.5Mo-5.1Al-1.8Zr-1.1Sn-2.5Cr-2.9Zn alloy [J]. Rare Metal Materials and Engineering, 2020, 49(4): 1235-1241. (in Chinese) [14] ALAGHMANDFARD R, CHALASANI D, HADADZADEH A, et al. Dynamic compressive response of electron beam melted Ti-6Al-4V under elevated strain rates: microstructure and constitutive models[J]. Additive Manufacturing, 2020, 35: 101347. [15] 徐雪峰, 王琳, 沙彦刚, 等. TC4 ELI钛合金动态压缩性能及绝热剪切敏感性的研究[J]. 兵工学报, 2020, 41(2): 366-373. XU X F, WANG L, SHA Y G, et al. Research on dynamic mechanical properties of TC4 ELI titanium alloy and its sensitivity to adiabatic shear banding[J]. Acta Armamentarii, 2020, 41(2): 366-373. (in Chinese) [16] 郝晓博, 张强, 李渤渤, 等. α+β相区高温退火对Ti80合金板材组织与性能的影响[J]. 材料开发与应用,2018,33(1): 49-53. HAO X B, ZHANG Q, LI B B, et al. Effect of high temperature annealing in α + β phase region on microstructure and properties of Ti80 alloy plates[J]. Development and Application of Materials, 2018, 33 (1): 49-53. (in Chinese) [17] ZHOU D D, ZENG W D, XU J W, et al. Evolution of equiaxed and lamellar α during hot compression in a near alpha titanium alloy with bimodal microstructure[J]. Materials Characterization, 2019, 151: 103-111. [18] 罗锦华, 朱燕丽, 孙小平, 等.热加工及热处理工艺对Ti80合金棒材组织和性能的影响[J]. 钛工业进展, 2016, 33(2): 20-24. LUO J H, ZHU Y L, SUN X P, et al. Effects of hot working process and heat treatment on microstructures and mechanical properties of Ti80 alloy bars[J]. Titanium Industry Progress, 2016, 33(2): 20-24. (in Chinese) [19] 杜玉俊, 刘向宏, 李金山, 等. 12 t级Ti80合金铸锭的成分均匀性及其偏析规律[J]. 稀有金属材料与工程, 2020, 49(3): 883-889. DU Y J, LIU X H, LI J S, et al. Uniformity and segregation in 12 t ingot of Ti80 alloy[J]. Rare Metal Materials and Engineering, 2020, 49(3): 883-889. (in Chinese) [20] GUO K, MENG K, MIAO D, et al. Effect of annealing on microstructure and tensile properties of skew hot rolled Ti-6Al-3Nb-2Zr-1Mo alloy tube[J]. Materials Science and Engineering A, 2019, 766: 138346. [21] WANG Q, REN J Q, WU Y K, et al. Comparative study of crack growth behaviors of fully-lamellar and bi-lamellar Ti-6Al-3Nb-2Zr-1Mo alloy[J]. Journal of Alloys and Compounds, 2019, 789: 249-255. [22] XIONG J H, LI S K, GAO F Y, et al. Microstructure and mechanical properties of Ti6321 alloy welded joint by GTAW[J]. Materials Science and Engineering A, 2015, 640: 419-423. [23] 徐雪峰, 王琳, 程兴旺, 等. Ti6321 钛合金在Taylor 杆冲击下的动态断裂微观组织观测[J]. 兵工学报, 2020, 41(7): 1401-1407. XU X F, WANG L, CHENG X W, et al. Dynamic observation of fracture microstructure of Ti6321titanium alloy in Taylor bar impact test[J]. Acta Armamentarii, 2020, 41(7): 1401-1407. (in Chinese) [24] SHI X H, ZHAO C, CAO Z H, et al. Mechanical behavior of a near α titanium alloy under dynamic compression: characterization and modeling[J]. Progress in Natural Science: Materials International, 2019, 29(4): 432-439. [25] LEYENS C, PETERS M. Titanium and titanium alloys: fundamentals and applications[M]. Weinheim, Germany: WILEY-VCH, 2003. [26] LI Z Z, WANG B F, ZHAO S T, et al. Dynamic deformation and failure of ultrafine-grained titanium[J]. Acta Materialia, 2017, 125: 210-218. [27] SHAHAN A R, TAHERI A K. Adiabatic shear bands in titanium and titanium alloys: a critical review[J]. Materials and Design, 1993, 14(4): 243-250. [28] REN Y, YU X D, TAN C W, et al. Dynamic mechanical pro-perties and adiabatic shearing behavior of the shock prestrained Ti-6Al-4V alloy having bimodal microstructure[J]. Journal of Alloys and Compounds, 2019, 773: 1054-1063.
|