[1] 王立军, 武会宾, 蔡庆伍, 等. 1 500 MPa级低合金超高强钢的微观组织与力学性能[J]. 金属学报, 2010, 46(6):687-694. WANG L J, WU H B, CAI Q W, et al. Microstructure and mechanical properties of 1 500 MPa grade ultra-high strength low alloy steel[J]. Acta Metallurgica Sinica, 2010, 46(6):687-694. (in Chinese) [2] 范长刚, 董瀚, 时捷, 等. 2 200 MPa级超高强度低合金钢的组织和力学性能[J]. 兵器材料科学与工程, 2006, 29(2):31-35. FAN C G, DONG H, SHI J, et al. Microstructure and mechanical properties of 2 200 MPa grade ultra-high strength low alloy steels[J]. Ordnance Material Science and Engineering, 2006, 29(2):31-35.(in Chinese) [3] MAWEJA K, STUMPF W. The design of advanced performance high strength low-carbon martensitic armour steels: part 1. Mechanical property considerations[J]. Materials Science and Engineering: A, 2008, 485(1/2):140-153. [4] KILI N, BEDIR S, ERDIK A, et al. Ballistic behavior of high hardness perforated armor plates against 7.62 mm armor piercing projectile[J]. Materials & Design, 2014, 63:427-438. [5] 张海军, 李潭, 王晶琦, 等. 防护型车用超高强钢的焊接性及焊接工艺[J]. 钢铁研究学报, 2017, 29(4):323-328. ZHANG H J, LI T, WANG J Q, et al. Weldability and welding technology of ultrahigh strength steel for protection-vehicle[J]. Journal of Iron and Steel Research, 2017, 29(4):323-328.(in Chinese) [6] MEYER L W, KUNZE H D, SEIFERT K. Dynamic behavior of high strength steels under tension[M]∥MEYERS M A, MURR L E. Shock Waves and High-Strain-Rate Phenomena in Metals. Boston, MA,US: Springer, 1981: 51-63. [7] BOYCE B L, DILMORE M F. The dynamic tensile behavior of tough, ultrahigh-strength steels at strain-rates from 0.000 2 s-1 to 200 s-1[J]. International Journal of Impact Engineering, 2009, 36(2):263-271. [8] DEMIR T, BEYLI M, YILDIRIM R O. Effect of hardness on the ballistic impact behavior of high-strength steels against 7.62-mm armor piercing projectiles[J]. Journal of Materials Engineering and Performance, 2009, 18(2): 145-153. [9] 王维占, 陈智刚, 李小军, 等. 7.62 mm子弹的两种典型破坏特性研究[J]. 兵工学报, 2018, 39(增刊1):20-25. WANG W Z, CHEN Z G, LI X J, et al. Research on two typical failure modes of 7.62 mm bullet[J]. Acta Armamentarii, 2018, 39(S1):20-25.(in Chinese) [10] 高华, 熊超, 殷军辉. 弹丸侵彻多层异质复合靶板中装甲钢变形细观和微观机理研究[J]. 兵工学报, 2018, 39(8): 1565-1575. GAO H, XIONG C, YIN J H. Research on macroscopic and microscopic mechanisms of deformation of armor steel in multilayer heterogeneous composite target subjected to projectile[J]. Acta Armamentarii, 2018,39(8):1565-1575.(in Chinese) [11] 朱建军,李伟兵,李文彬,等. 高应变率下金属柱壳动态变形及形成破片特性研究[J]. 兵工学报,2017,38(10):1933-1941. ZHU J J, LI W B, LI W B, et al. Dynamic deformation and fracture fragmentation behavior of metal cylindrical shell at high strain rates[J]. Acta Armamentarii, 2017, 38(10): 1933-1941. (in Chinese) [12] 陈刚,罗小兵,柴锋,等. 两次淬火对HSLA钢组织和冲击韧性的影响[J]. 材料研究学报,2020,34(9):705-711. CHEN G, LUO X B, CHAI F, et al. Effect of double quenching on microstructure and impact toughness of a high strenght low alloy steel[J]. Chinese Journal of Materials Research, 2020, 34(9): 705-711. (in Chinese) [13] WILSDORF H G F, KUHLMANN-WILSDOR D. Work softening and Hall-Petch hardening in extruded mechanically alloyed alloys[J]. Materials Science and Engineering A, 1993, 164(1/2): 1-14. [14] TAYLOR G I. The mechanism of plastic deformation of crystals. Part I. Theoretical[J]. Proceedings of the Royal Society of London. Series A, Containing Papers of a Mathematical and Physical Character, 1934, 145(855): 362-387. [15] PETRYK H, STUPKIEWICZ S. A quantitative model of grain refinement and strain hardening during severe plastic deformation[J]. Materials Science and Engineering A, 2007, 444(1/2): 214-219. [16] XU Z, HUANG F. Plastic behavior and constitutive modeling of armor steel over wide temperature and strain rate ranges[J]. Acta Mechanica Solida Sinica, 2012, 25(6):598-608.
第41卷第11期2020 年11月 兵工学报ACTA ARMAMENTARII Vol.41No.11Nov.2020
|