基于功能损伤的装备有效毁伤幅员仿真方法研究

doi:10.3969/j.issn.1000-1093.2020.01.001

兵工学报 ›› 2020, Vol. 41 ›› Issue (1): 1-12.doi: 10.3969/j.issn.1000-1093.2020.01.001

基于功能损伤的装备有效毁伤幅员仿真方法研究

陈材¹，石全¹，尤志锋¹，王亚东¹，戈洪宇²，张芳³

(1.陆军工程大学石家庄校区，河北石家庄 050003； 2.中国白城兵器试验中心，吉林白城 137001；3.32178部队，北京 100012）

收稿日期:2019-04-01 修回日期:2019-04-01 上线日期:2020-02-22
通讯作者: 石全（1966—），男，教授，博士生导师 E-mail:shiq_aeu@163.com
作者简介:陈材（1990—），男，博士研究生。 E-mail： caichen20091165@126.com
基金资助:
武器装备预先研究重点项目（9140A27040414JB34001）; 军内科研项目(WG2017ZT020007)

Research on Simulation Method of Effective Damage Area of Equipment Based on Functional Damage

CHEN Cai¹， SHI Quan¹， YOU Zhifeng¹， WANG Yadong¹, GE Hongyu², ZHANG Fang³

(1.Shijiazhuang Campus, Army Engineering University, Shijiazhuang 050003, Hebei, China; 2.Baicheng Ordnance Test Center of China，Baicheng 137001, Jilin, China； 3.Unit 32178 of PLA, Beijing 100012, China)

Received:2019-04-01 Revised:2019-04-01 Online:2020-02-22

摘要/Abstract

摘要： 为在装备战斗损伤试验中收集到足够多的有效损伤数据，提出利用装备有效毁伤幅员进行试验场地设置的新方法。建立有效毁伤幅员的求解模型，提出广义毁伤幅员和基于任务的装备功能损伤概率概念。针对广义毁伤幅员的求解，深入研究装备物理损伤建模与仿真问题，主要包括破片毁伤效能模型、面向破片损伤仿真的装备描述模型、装备破片损伤响应模型和装备损伤仿真过程模型。针对装备功能损伤概率的求解，分析装备功能损伤仿真模型的建立方法及步骤，提出装备损伤注入的概念，并对损伤注入的实施方法及步骤进行了分析。仿真实例分析结果表明，所提出的装备有效毁伤幅员求解方法是可行且有效的，对于优化装备战斗损伤试验方案设计、降低试验费效比具有十分重要的现实意义。

关键词: 装备战斗损伤试验, 毁伤幅员, 物理损伤, 功能损伤, 损伤注入

Abstract: A method for using the effective damage area to set up the test site is proposed to collect the enough effective damage data in the equipment battle damage test. A solving model for effective damage area is established, and a concept of generalized damage area and task-based equipment functional damage probability is proposed. For the solution of generalized damage area, the physical damage modeling and simulation methods are studied, including fragment damage effectiveness model, equipment description model for fragment damage simulation, equipment fragment damage response model and equipment damage simulation process model. For the solution of equipment functional damage probability, the establishment method and steps of equipment damage simulation model are analyzed. A concept of equipment damage injection is proposed, and the implementation methods and steps of damage injection are analyzed. The simulated results show that the proposed method for solving the effective damage area of equipment is feasible and effective, and has great practical significance to optimize the design of battle damage test program and reduce the cost-effectiveness of test. Key

Key words: equipmentbattledamagetest, damagearea, physicaldamage, functionaldamage, damageinjection

中图分类号:

E920.8

陈材，石全，尤志锋，王亚东，戈洪宇，张芳. 基于功能损伤的装备有效毁伤幅员仿真方法研究[J]. 兵工学报, 2020, 41(1): 1-12.

CHEN Cai， SHI Quan， YOU Zhifeng， WANG Yadong, GE Hongyu, ZHANG Fang. Research on Simulation Method of Effective Damage Area of Equipment Based on Functional Damage[J]. Acta Armamentarii, 2020, 41(1): 1-12.

参考文献

［1］石全, 米双山, 王广彦, 等. 装备战伤理论与技术［M］. 北京: 国防工业出版社, 2007.
SHI Q, MI S S, WANG G Y, et al. Theory and technology of equipment battlefield damage［M］. Beijing: National Defense Industry Press, 2007. (in Chinese)

［2］孙业斌. 爆炸作用与装药设计［M］. 北京: 国防工业出版社, 1987.
SUN Y B. Explosive action and charge design［M］. Beijing: National Defense Industry Press, 1987. (in Chinese)

［3］高鹏, 徐豫新, 李可, 等. 火箭杀爆弹动爆毁伤幅员计算方法与可视化仿真实现［J］. 兵工学报, 2016, 37(增刊2): 216-220.
GAO P, XU Y X, LI K, et al. Modeling and visual simulation of dynamic explosion damage area of rocket blast-fragmentation warhead［J］. Acta Armamentarii, 2016, 37(S2): 216-220. (in Chinese)
［4］刘建斌, 徐豫新, 高鹏, 等. 火箭杀爆弹毁伤幅员仿真［J］. 兵工学报, 2016, 37(增刊2): 159-164.
LIU J B, XU Y X, GAO P, et al. Simulation on damage area of high explosive projectile［J］. Acta Armamentarii, 2016, 37(S2): 159-164. (in Chinese)

［5］王树山, 韩旭光, 王新颖. 杀伤爆破弹综合威力评估方法与应用研究［J］. 兵工学报, 2017, 38(7): 1249-1254.
WANG S S, HAN X G, WANG X Y. Research on evaluation method of comprehensive power of high explosive warhead and its application［J］. Acta Armamentarii, 2017, 38(7): 1249-1254. (in Chinese)
［6］刘怡昕.炮兵射击学［M］. 北京: 海军出版社, 2000.
LIU Y X. Theories of artillery firing［M］. Beijing: Navy Press, 2000. (in Chinese)

［7］王广彦, 胡起伟. 基于计算机仿真的装备战场损伤规律研究［J］. 系统工程与电子技术, 2006, 28(11)：1717-1720.
WANG G Y, HU Q W. Research of battlefield damage analysis based on computer simulation［J］. Systems Engineering and Electronics, 2006, 28(11):1717-1720. (in Chinese)

［8］张庆捷, 周磊, 徐华, 等. 射击效率评定中火炮幅员及毁伤幅员计算［J］. 火力与指挥控制, 2009, 34(5): 128-130, 137.
ZHANG Q J, ZHOU L, XU H, et al. The study of calculating the dimensionality of artillery and damage in evaluating efficiency of firing［J］. Fire Control & Command Control, 2009, 34(5): 128- 130, 137. (in Chinese)
［9］雷亚丽, 牛竹云, 王俊丽, 等. 基于射击过程仿真的炮兵营射击效力计算［J］. 火力与指挥控制, 2018, 43(3): 168-171.
LEI Y L, NIU Z Y, WANG J L, et al. Artillery battalion damage effective assessment based on simulation of impact position［J］. Fire Control & Command Control, 2018, 43(3): 168-171.(in Chinese)
［10］韩夫亮. 预制破片战斗部爆炸威力场数值模拟分析［D］. 长春: 吉林大学, 2008.
HAN F L. The simulation analysis of explosion power field of preformed fragment warhead ［D］. Changchun: Jilin University, 2008. (in Chinese)

［11］路航, 石全, 胡起伟, 等. 炮兵营射击的弹着点模拟及射击误差分析［J］. 指挥控制与仿真, 2011, 33(3):109-112.
LU H, SHI Q, HU Q W, et al. Analysis of firing error and simulation of impact position of artillery battalion［J］. Command Control & Simulation, 2011, 33(3):109-112. (in Chinese)

［12］王广彦, 胡起伟, 刘伟. 装备战斗损伤组合建模与仿真技术研究［J］. 兵工学报, 2012, 33(10):1266-1275.
WANG G Y, HU Q W, LIU W. Study on composable modeling and simulation technology for equipment battlefield damage［J］. Acta Armamentarii, 2012, 33(10):1266-1275. (in Chinese)
［13］董秀萍, 杨建春. 装备维修训练中机械故障设置方法研究［J］. 火炮发射与控制学报, 2010, 11(3):38-41.
DONG X P, YANG J C. Setup method research of mechanical malfunctions in equipment maintenance and training［J］. Journal of Gun Launch & Control, 2010, 11(3):38-41. (in Chinese)
［14］刘晋霞, 胡仁喜, 康士廷, 等. ADAMS 2012虚拟样机从入门到精通［M］. 北京: 机械工业出版社, 2013.
LIU J X, HU R X, KANG S T, et al. ADAMS 2012 virtual prototype: from entry to master［M］. Beijing: China Machine Press, 2013. (in Chinese)

［15］闫雪锋. 复杂产品虚拟样机统一建模方法研究［D］. 天津: 河北工业大学, 2015.
YAN X F. Research of unified modeling method for virtual prototype of complex product［D］. Tianjin: Hebei University of Technology, 2015. (in Chinese)

［16］张政, 冯广斌, 孙华刚. 基于虚拟样机技术的齿轮传动系统动态仿真研究［J］. 机械传动, 2018, 42(11): 142-146.
ZHANG Z, FENG G B, SUN H G. Research of dynamic simulation of gear transmission system based on virtual prototype technology［J］. Journal of Mechanical Transmission, 2018, 42(11): 142-146.
［17］满强．电子装备爆炸振动损伤模拟方法研究［D］．石家庄: 军械工程学院,2007．
MAN Q. Research on electronic equipment damage simulation method in the explosion vibration environment［D］. Shijiazhuang: Ordnance Engineering College, 2007. (in Chinese)

［18］邱宣怀, 郭可谦, 吴宗泽, 等. 机械设计［M］. 北京: 高等教育出版社, 1997.
QIU X H, GUO K Q, WU Z Z, et al. Machine design［M］. Beijing: Higher Education Press, 1997. (in Chinese)

第41卷第1期
2020 年1月兵工学报ACTA
ARMAMENTARIIVol.41No.1Jan.2020

基于功能损伤的装备有效毁伤幅员仿真方法研究

Research on Simulation Method of Effective Damage Area of Equipment Based on Functional Damage

PDF

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 1

编辑推荐

Metrics

本文评价