基于二参数寻优设计点的混合结构可靠性分析算法

doi:10.3969/j.issn.1000-1093.2019.04.022

兵工学报 ›› 2019, Vol. 40 ›› Issue (4): 865-873.doi: 10.3969/j.issn.1000-1093.2019.04.022

基于二参数寻优设计点的混合结构可靠性分析算法

邱涛^1,2，张建国^1,2，邱继伟^1,3，魏娟^1,2，游令非^1,2

(1.北京航空航天大学可靠性与系统工程学院, 北京 100191;2.北京航空航天大学可靠性与环境工程技术国防科技重点实验室, 北京 100191;3.中国兵器工业标准化研究所, 北京 100089)

收稿日期:2018-06-13 修回日期:2018-06-13 上线日期:2019-06-10
通讯作者: 张建国(1966—), 男, 研究员，博士生导师 E-mail:zjg@buaa.edu.cn
作者简介:邱涛(1993—), 男, 硕士研究生。E-mail: qiutaolq@126.com
基金资助:
国家自然科学基金项目(51675026)

Two-parameter Optimization Design Point-based Reliability Analysis Algorithm for Structures with Mixed Uncertainty

QIU Tao^1,2， ZHANG Jianguo^1,2， QIU Jiwei^1,3， WEI Juan^1,2， YOU Lingfei^1,2

(1.School of Reliability and Systems Engineering, Beihang University, Beijing 100191, China; 2.Science and Technology on Reliability and Environmental Engineering Laboratory, Beihang University, Beijing 100191, China;3.China Ordnance Industrial Standardization Research Institute, Beijing 100089, China)

Received:2018-06-13 Revised:2018-06-13 Online:2019-06-10

摘要/Abstract

摘要： 针对机械结构中既含随机变量又含区间变量的混合可靠性问题，提出一种基于二参数的混合可靠性分析算法。区间变量使可靠性分析问题变为双层优化问题，为降低双层优化模型对计算效率的影响，将其解耦为概率分析和区间分析高效循环序列迭代模型；在概率分析时，引入两个调整参数，分别控制搜索步长和搜索方向，以实现寻优设计点、保证收敛的稳定性及搜索效率；在区间分析时，将区间分析问题转化为方便求解的二次规划问题，并结合梯度投影法搜索区间最优点；通过两个案例分析，对所提算法的计算精度和效率进行验证。结果表明：该算法与蒙特卡洛抽样法相比，计算的最大失效概率相对误差均在5%以内，且函数调用次数在1 000次以内即可达到收敛；当功能函数非线性程度较高时，该算法同样具有较高的计算精度、效率及收敛稳定性。

关键词: 结构可靠性, 混合不确定性, 序列迭代, 寻优设计点, 调整参数, 区间

Abstract: A mixed reliability analysis algorithm based on two parameters is proposed for the mixed reliability problem of mechanical structure with random variables and interval variables. Interval variables make the reliability analysis problem become a double-loop optimization problem. In order to reduce the influence of double-loop optimization model on computational efficiency, it is decoupled into a high-efficiency sequence iterative model for probability and interval analysis. In order to optimize design point, two adjusting parameters are introduced to control the search step length and the search direction, respectively, in probability analysis, which ensures the convergence stability and the search efficiency. The interval analysis problem is transformed into a more solvable quadratic programming problem, and the gradient projection method is used to search for the interval optimum point. The analyzed results of two cases show that the relative error of maximun failure probability calculated by the proposed algorithm is within 5%, and the number of function calls can reach convergence within 1000 times compared with Monte Carlo sampling. When the performance function has a high degree of nonlinearity, the proposed algorithm also has high calculation accuracy, efficiency and convergence stability. Key

Key words: structuralreliability, mixeduncertainty, sequenceiteration, optimizationdesignpoint, adjustingparameter, interval

中图分类号:

TB114.33

邱涛，张建国，邱继伟，魏娟，游令非. 基于二参数寻优设计点的混合结构可靠性分析算法[J]. 兵工学报, 2019, 40(4): 865-873.

QIU Tao， ZHANG Jianguo， QIU Jiwei， WEI Juan， YOU Lingfei. Two-parameter Optimization Design Point-based Reliability Analysis Algorithm for Structures with Mixed Uncertainty[J]. Acta Armamentarii, 2019, 40(4): 865-873.

参考文献

［1］郭书祥, 吕震宙. 结构的非概率可靠性方法和概率可靠性方法的比较［J］. 应用力学学报, 2003, 20(3):107-110.
GUO S X, L Z Z. Comparison between the non-probabilistic and probabilistic reliability methods for uncertain structure design［J］. Chinese Journal of Applied Mechanics, 2003, 20(3):107-110.(in Chinese)
［2］ KANG Z, LUO Y J. Reliability-based structural optimization with probability and convex set hybrid models［J］. Structural and Multidisciplinary Optimization, 2010, 42(1):89-102.
［3］王骞, 张建国, 彭文胜, 等. 基于复合函数的复杂机械系统分层响应面建模与可靠性分析［J］. 兵工学报, 2018, 39(3):590-597.
WANG Q, ZHANG J G, PENG W S, et al. Hierarchical response surface modeling and reliability analysis of complex mechanical system based on composite function［J］. Acta Armamentarii, 2018, 39(3):590-597.(in Chinese)
［4］ XIE S J, PAN B S, DU X P. A single-loop optimization method for reliability analysis with second order uncertainty［J］. Enginee- ring Optimization, 2014, 47(8):1-15.
［5］ DU X P. Unified uncertainty analysis by the first order reliability method［J］. Journal of Mechanical Design, 2008, 130(9): 1404-1- 1404-10.
［6］姜潮, 刘丽新, 龙湘云. 一种概率区间混合结构可靠性的高效计算方法［J］. 计算力学学报, 2013, 30(5): 605-609.
JIANG C, LIU L X, LONG X Y. An efficient reliability analysis method for structures with probability-interval mixed uncertainty［J］. Chinese Journal of Computational Mechanics, 2013, 30(5): 605-609.(in Chinese)
［7］ ELISHAKOFF I, COLOMHI P. Combination of probabilistic and convex models of uncertainty when scarce knowledge is present on acoustic excitation parameters［J］. Computer Methods in Applied Mechanics and Engineering, 1993, 104(2):187-209.
［8］ XIE S J, PAN B S, DU X P. High dimensional model representation for hybrid reliability analysis with dependent interval variables constrained within ellipsoids［J］. Structural and Multidisciplinary Optimization, 2017, 56(6):1493-1505.
［9］宋向华, 安伟光, 蒋运华. 超空泡射弹动力稳定性的非概率可靠性分析［J］. 兵工学报, 2012, 33(8):996-1003.
SONG X H, AN W G, JIANG Y H. Non-probabilistic reliability analysis for supercavitating projectile based on dynamic stability［J］. Acta Armamentarii, 2012, 33(8):996-1003.(in Chinese)

［10］刘瞻, 张建国, 王灿灿, 等. 基于优化Kriging模型和重要抽样法的结构可靠性混合算法［J］. 航空学报, 2013, 34(6):1347-1355.
LIU Z, ZHANG J G, WANG C C, et al. Hybrid structure reliability method combing optimized Kriging model and importance sampling ［J］. Acta Aeronautica et Astronautica Sinica, 2013, 34(6):1347-1355.（in Chinese）
［11］ DU X P. Interval reliability analysis［C］∥Proceeding of ASME 2007 International Design Engineering Technical Conference and Computers and Information in Engineering Conference. Las Vegas, CA, US: Design Engineering Division, and Computers and Information in Engineering Division, 2007:1103-1109.
［12］ ZHANG J G, QIU J W, WANG P D. Hybrid reliability analysis for spacecraft docking lock with random and interval uncertainty［J］. International Journal of Aerospace Engineering, 2017(4):1-9.
［13］ HASOFER A M, LIND N C. Exact and invariant second-moment code format［J］. Journal of Engineering Mechanics Division, 1974, 100(1):111-121.
［14］ RACKWITZ R, FIESSLER B. Structural reliability under combined random load sequences［J］. Computers and Structures, 1978, 9(5):489-494.
［15］ GONG J X, PING Y. A robust iterative algorithm for structural reliability analysis［J］. Structural and Multidisciplinary Optimization, 2011, 43:519-527.
［16］ MOHAMAND A R, MOHEN A S, MOHAMMAD A B, et al. A robust approximation method for nonlinear cases of structure reliability analysis［J］. International Journal of Mechanical Sciences, 2017, 133:11-20.
［17］ ZHANG Y, KIUREGHIAN A. Two improved algorithms for reliability analysis［C］∥Proceedings of the 6th IFIP WG7.5 Working Conference on Reliability and Optimization of Structural Systems. New York, NY, US: Springer, 1995:297-304.
［18］潘柏松, 谢少军, 杜小平. 随机变量和非独立区间变量下的可靠性序列迭代算法［J］. 中国机械工程, 2015, 26(12):1569-1575.
PAN B S, XIE S J, DU X P. A sequentual iteration algorithm for reliability analysis with random and dependent interval variables［J］. China Mechanical Engineering, 2015, 26(12):1569-1575.(in Chinese)
［19］ NOCEDAL J, WRIGHT S. Numerical optimization［M］. New York, NY, US: Springer, 2006:474-479.

第40卷
第4期2019 年4月兵工学报ACTA
ARMAMENTARIIVol.40No.4Apr.2019

[1]	邱继伟，罗海胜. 结构可靠性分析的自适应共轭非线性近似方法[J]. 兵工学报, 2021, 42(3): 648-654.
[2]	吴斌，衣晓，李双明. 一种区间距离的冲突证据组合方法[J]. 兵工学报, 2020, 41(6): 1140-1150.
[3]	朱达伟, 周金宇, 庄百亮. 结构可靠性优化的通用生成函数-序列优化与可靠性评估方法[J]. 兵工学报, 2020, 41(2): 398-405.
[4]	陈昭岳，刘莉，陈树霖，崔颖. 月球探测器着陆动响应区间不确定性分析[J]. 兵工学报, 2019, 40(2): 442-448.
[5]	孟广伟，魏彤辉，周立明，李锋. 基于泰勒展开法的结构混合可靠性分析[J]. 兵工学报, 2018, 39(7): 1404-1410.
[6]	于震梁, 孙志礼, 曹汝男, 王鹏. 基于支持向量机和卡尔曼滤波的机械零件剩余寿命预测模型研究[J]. 兵工学报, 2018, 39(5): 991-997.
[7]	余俊，明振军，阎艳，王国新，黄静. 考虑不确定性的机枪作战效能综合评估方法[J]. 兵工学报, 2018, 39(10): 2048-2055.
[8]	魏帅, 冯新喜, 王泉, 鹿传国. 基于箱粒子滤波的鲁棒标签多伯努利跟踪算法[J]. 兵工学报, 2017, 38(10): 2062-2068.
[9]	赵抢抢，侯保林. 火炮弹药协调器区间不确定参数辨识[J]. 兵工学报, 2017, 38(1): 35-42.
[10]	蒋清山，钱林方，徐亚栋，邹权. 考虑区间不确定性的某弹丸提升装置参数优化[J]. 兵工学报, 2015, 36(6): 1117-1122.
[11]	石海军，钱林方，李淼. 具有参数区间不确定的协调器保性能优化[J]. 兵工学报, 2014, 35(2): 152-157.
[12]	李皓川，孙志礼，王海. 基于降维可视化技术的结构可靠性灵敏度分析[J]. 兵工学报, 2014, 35(11): 1876-1882.
[13]	陈侠，刘敏，胡永新. 基于不确定信息的无人机攻防博弈策略研究[J]. 兵工学报, 2012, 33(12): 1510-1515.
[14]	孙祝岭. 正态应力和正态强度结构可靠性的经典精确限[J]. 兵工学报, 2011, 32(3): 355-358.
[15]	李明辉，夏靖波，韩仲祥，陶晓燕. 基于差异投影的多类型指标综合评估方法[J]. 兵工学报, 2011, 32(1): 17-22.

基于二参数寻优设计点的混合结构可靠性分析算法

Two-parameter Optimization Design Point-based Reliability Analysis Algorithm for Structures with Mixed Uncertainty

PDF

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 15

编辑推荐

Metrics

本文评价