基于方位向去斜的星载滑动聚束两步成像处理算法研究

doi:10.3969/j.issn.1000-1093.2012.01.016

兵工学报 ›› 2012, Vol. 33 ›› Issue (1): 95-102.doi: 10.3969/j.issn.1000-1093.2012.01.016

基于方位向去斜的星载滑动聚束两步成像处理算法研究

丁泽刚，刘飞峰，曾涛

(北京理工大学信息与电子学院, 北京 100081)

收稿日期:2010-12-15 修回日期:2010-12-15 上线日期:2014-03-04
作者简介:丁泽刚(1980—)，男，博士
基金资助:
国家科学基金项目（No. 610011896089007361032009）

Study on Two-step Imaging Based on Azimuthal Dechirp in Space-borne Sliding Spotlight SAR

DING Ze-gang， LIU Fei-feng， ZENG Tao

(College of Information and Electronics, Beijing Institute of Technology, Beijing 100081，China)

Received:2010-12-15 Revised:2010-12-15 Online:2014-03-04

摘要/Abstract

摘要： 两步成像算法通过方位向去斜处理可以有效地降低星载滑动聚束SAR原始回波的多普勒带宽。为了有效地防止频谱混叠，脉冲重复频率(PRF)需要大于方位向去斜后的残余多普勒带宽，这也是两步算法可以应用于滑动聚束SAR数据处理的前提。为此，论文首先在距离向频域和方位向时域内详细地推导方位向去斜处理后残余多普勒带宽的解析表达式，得出残余多普勒带宽与距离向带宽、波束方位向宽度和波束方位向转角有关；然后在距离向时域和方位向时域内通过分析距离徙动引入了距离向信号对方位向信号的幅度加窗效应，定性地分析和验证频域内推导的残余多普勒带宽方程的正确性。最后，通过计算机仿真验证了文中理论分析的正确性。

关键词: 雷达工程, 星载滑动聚束SAR, 两步成像处理, 去斜处理, 残余多普勒带宽

Abstract: Based on dechirp processing, the two step imaging can effectively decrease the Doppler bandwidth of the echo in space borne sliding spotlight SAR. In order to overcome the alias of the echo, pulse repeation frequency (PRF) should be larger than the residual Doppler bandwidth of the dechirped azimuth signal, which is the fundamental of the two step imaging algorithm. Firstly, the formula of the residual Doppler band-width (RDB) of dechirped azimuth signal in the range frequency and azimuth time domains, which was related to the transmitted bandwidth, azimuth beam width and the azimuth rotation angle, was derived. Secondly, the influence of the window function of the dechirped azimuth signal in two dimensional time domains was analyzed by introducing range migration, and the derived RDB formula was analyzed and validated. Finally, the simulation results validate the analysis.

Key words: radar engineering, space-borne sliding spotlight SAR, two-step imaging algorithm, dechirp processing, residual Doppler bandwidth

中图分类号:

TN951

丁泽刚，刘飞峰，曾涛. 基于方位向去斜的星载滑动聚束两步成像处理算法研究[J]. 兵工学报, 2012, 33(1): 95-102.

DING Ze-gang， LIU Fei-feng， ZENG Tao. Study on Two-step Imaging Based on Azimuthal Dechirp in Space-borne Sliding Spotlight SAR[J]. Acta Armamentarii, 2012, 33(1): 95-102.

参考文献

［1］ Richard Bamler. A comparison of Range-Doppler and wave-number domain SAR focusing algorithms[J]. IEEE trans. on Geosci. Remote Sensing, 1992, 30(4): 706-713.
［2］ Cumming I G, Wong F H. Digital processing of synthetic aperture radar data: algorithms and implementation[M]. Norwood, MA: Artech House, 2005.
［3］ Cafforio C, Prati C, Rocca F. SAR data focusing using seismic migration techniques[J]. IEEE Trans. Geosci. Remote Sens., 1991, 27(2): 194-207.
［4］ Fornaro G, Lanari R, Sansosti E, et al. A two-step spotlight SAR data focusing approach[C]∥Proc. of IGARSS 2000, Honolulu, USA, 2000: 84-86.
［5］ Lanari R, Zoffoli S, Sansosti E, et al. New approach for hybrid Strip-map/Spotlight SAR data focusing[C]∥IEE Proc. Radar Sonar Navig., 2001.
［6］ Riccardo Lanari, Manlio Tesauro, Eugenio Sansosti, et al. Spotlight SAR data focusing based on a two-step processing approach[J]. IEEE Transactions on Geoscience and Remote Sensing, 2001, 39(9): 1993-2004.
［7］ Belcher D P, Baker C J. High resolution processing of hybrid strip-map/spotlight mode SAR[C]∥IEE Proc.-Radar, Sonar Navig., 1996.
［8］唐禹，王岩飞，张冰尘. 滑动聚束SAR成像模式研究[J].电子与信息学报，2007, 29（1）: 26-29.
TANG Yu，WANG Yan-fei，ZHANG Bing-chen. A study of sliding spotlight SAR imaging mode[J]. Journal of Electronics & Information Technology, 2007, 29(1): 26-29. (in Chinese)
［9］ Stephane Henrion, Laurent Savy, Jean-Guy Planes. Properties of hybrid strip-map/spotlight space-borne SAR processing[C]∥Proc. of IGARSS 1999, Hamburg: IEEE, 1999: 530-534.
［10］ Josef Mittermayer, Richard Lord, Elke Borner. Sliding spotlight SAR processing for terra SAR-X using a new formulation of the extended chirp scaling algorithm[C]∥Proc. of IGARSS 2003, 2003: 1462-1464.
［11］ Alicja Ossowska, Rainer Speck. Hybrid strip-map/spotlight mode processing based on chirp scaling processing[C]∥Radar Symposium, 2008 International, 2008: 1-4.
［12］ Zegang Ding, Teng Long, Tao Zeng, et al. Deramp range migration processing for space-borne spotlight SAR[J]. Advances in Space Research, 2008, 41(11):1822-1826.

[1]	肖泽龙，王华，周鹏，韩璐霞，王元恺，李潇，逯暄. 基于机会辐射源的弹载探测卫星优选方法[J]. 兵工学报, 2017, 38(8): 1555-1562.
[2]	陈嘉鸿，向颉，王二建. 方位俯仰跟踪框架下的角偏差无奇点修正方法[J]. 兵工学报, 2016, 37(9): 1708-1714.
[3]	黄中瑞，周青松，张剑云. 基于多输入多输出雷达发射方向图综合的波形设计[J]. 兵工学报, 2016, 37(5): 851-858.
[4]	王红卫, 范翔宇，陈游，杨远志. 基于循环平稳度准则的多路雷达信号识别算法[J]. 兵工学报, 2016, 37(4): 661-669.
[5]	徐舟，张浩，程水英. 未知包络多分量线性调频脉冲信号参数估计[J]. 兵工学报, 2016, 37(3): 462-470.
[6]	黄中瑞，张剑云，周青松，牛朝阳. 匹配滤波器失配下的双基地多输入多输出雷达多目标角度估计[J]. 兵工学报, 2015, 36(8): 1487-1493.
[7]	薄超，顾红，苏卫民，陈金立. 天波雷达欠密度流星余迹干扰抑制算法[J]. 兵工学报, 2015, 36(5): 846-853.
[8]	杜强，宋耀良，季晨荷，曹东. 基于上采样和高阶Hermite插值滤波器组的超宽带数字波束形成技术研究[J]. 兵工学报, 2015, 36(4): 696-702.
[9]	颜佳冰，李伟，兰星，吴昊天，张群. 用于合成孔径雷达抗欺骗干扰的多相编码优化方法[J]. 兵工学报, 2015, 36(12): 2315-2320.
[10]	蔡幸福，张雄美，宋建社，常祯. 基于脉间分段随机移频的合成孔径雷达干扰技术及其应用模型[J]. 兵工学报, 2015, 36(11): 2196-2202.
[11]	于洪波，王国宏，张仲凯. 基于抛物线随机Hough变换的机载脉冲多普勒雷达机动弱目标检测前跟踪方法[J]. 兵工学报, 2015, 36(10): 1924-1932.
[12]	李财品，何明一. 合成孔径雷达马赛克模式成像算法[J]. 兵工学报, 2015, 36(1): 111-116.
[13]	欧建平，李伟，吴昊天，张军，颜佳冰. 基于优化Golomb序列和ω-k算法的低飞平台大斜视合成孔径雷达成像[J]. 兵工学报, 2015, 36(1): 187-192.
[14]	王洪迅，王士岩，王星，王红卫. 瞬时测频系统的线性调频信号分析及改进[J]. 兵工学报, 2014, 35(8): 1193-1199.
[15]	雷磊，周青松，张剑云，黄中瑞. 基于二阶锥规划的同时多频率/多波束干扰优化设计[J]. 兵工学报, 2014, 35(7): 1124-1130.

基于方位向去斜的星载滑动聚束两步成像处理算法研究

Study on Two-step Imaging Based on Azimuthal Dechirp in Space-borne Sliding Spotlight SAR

PDF

可视化

被引次数

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 15

编辑推荐

Metrics

本文评价