欢迎访问《兵工学报》官方网站,今天是 分享到:

兵工学报 ›› 2012, Vol. 33 ›› Issue (1): 77-82.doi: 10.3969/j.issn.1000-1093.2012.01.013

• 研究简报 • 上一篇    下一篇

一种极化捷变雷达中欺骗性干扰的提取方法

陈歆炜, 赵建中, 吴文   

  1. (南京理工大学 近程高速目标探测技术国防重点实验室, 江苏 南京 210094)
  • 收稿日期:2010-09-21 修回日期:2010-09-21 上线日期:2014-03-04
  • 作者简介:陈歆炜(1983—), 男, 博士研究生

A Method of Extracting Radar Deception in Polarization Agile Radar

CHEN Xin-wei, ZHAO Jian-zhong, WU Wen   

  1. (Ministerial Key Lab. of JGMT, Nanjing University of Science and Technology, Nanjing 210094, Jiangsu, China)
  • Received:2010-09-21 Revised:2010-09-21 Online:2014-03-04

摘要: 为简化目标回波和干扰信号的分离过程以及求解干扰的Jones矢量,提出一种简便的提取雷达欺骗性干扰方法。通过发射一组相关的极化捷变信号,利用目标的变极化效应和干扰极化相对不变的特性,在对接收机输出信号的加减运算中将目标回波和干扰分离,从而提取干扰波形以及计算其Jones矢量。与现有干扰特征提取算法相比,该方法在单片实现时可节省芯片资源。仿真表明,当干噪比(INR)大于11.8 dB时,Jones矢量计算相对误差不超过10%.

关键词: 雷达工程, 欺骗性干扰提取, 极化捷变, Jones矢量

Abstract: In order to simplify the separation of radar echo and deception and to get the Jones vector of deception, a simple and convenient method to extract radar deception is proposed. By transmitting a group of relative polarization agile signals, the scattered wave and deception can be separated during the calculation of the signal output by the receiver, while utilizing the polarization effect of the target and the constant polarization state of deception. Compared with existing interference feature extraction algorithms, resources can be saved when this algorithm is implemented in single chip. The simulation results show that the relative errors of the calculation are less than 10%, when INR is more than 11.8 dB.

Key words: radar engineering, radar deception extracting, polarization agile, Jones vector

中图分类号: