[1] 张迎亮, 赵林, 倪长启.“新概念炮”向未来战场走来[N]. 解放军报, 2019-07-26(9). ZHANG Y L,ZHAO L,NIN C Q.“New concept gun” coming to the future battlefield[N]. Liberation Army Daily,2019-07-26(009). (in Chinese) [2] 王志军, 尹建平. 弹药学[M].北京:北京理工大学出版社, 2005. WANG Z J, YIN J P. Ammunition theoty[M]. Beijing:Beijing Institute of Technology Press, 2005. (in Chinese) [3] 国力.详解“杰达姆”精确制导炸弹[J]. 现代军事,2003(7):28-30. GUO L. Detailed explanation of “JDAM” precision guided bomb[J]. Modern Military, 2003(7):28-30. (in Chinese) [4] GDLDSMITH W. Non-ideal projectile impact on targets[J].International Journal of Impact Engineering, 1999,22(2/3):95-395. [5] 焦文俊, 陈小伟. 长杆高速侵彻问题研究进展[J]. 力学进展, 2019, 49:316-395. JIAO W J, CHEN X W. Review on long-rod penetration at hypervelocity[J]. Advances in Mechanics,2019,49:316-395. (in Chinese) [6] TATE A. A theory for the deceleration of long rods after impact[J]. Journal of the Mechanics & Physics of Solids, 1967, 15(6): 387-399. [7] ALEKSEEVSKII V P. Penetration of a rod into a target at high velocity[J]. Combustion, Explosion, and Shock Waves, 1966, 2: 63-66. [8] JOHNSON W, SENGUPTA A K, GHOSN S K. Plasticine modelled high velocity oblique impact and ricochet of long rods[J]. International Journal of Mechanical Sciences,1982,24(7): 437-455. [9] ROSENBERG Z, ASHUACH Y, DEKEL E. More on the ricochet of eroding long rods-Validating the analytical model with 3D simulations[J]. International Journal of Impact Engineering,2007, 34(5): 942-957. [10] ROSENBERG Z, ASHUACH Y, YESHURUN Y, et al. On the main mechanisms for defeating AP projectiles, long rods and shaped charge jets[J]. International Journal of Impact Engineering, 2009, 36(4):588-596. [11] LEE W, LEE H J, SHIN H. Ricochet of a tungsten heavy alloy long-rod projectile from deformable steel plates[J]. Journal of Physics D:Applied Physics,2002, 35(20):2684. [12] 董玉财,杜忠华,刘荣忠,等.钨合金长杆体高速撞击薄钢板的跳飞研究[J].弹道学报,2014, 26(1):73-77. DONG Y C, DU Z H,LIU R Z, et al. Research on ricochet of tungsten alloy long rod impacting thin steel target with high-velocity[J]. Journal of Ballistics, 2014, 26(1):73-77. (in Chinese) [13] 章程浩, 沈培辉. 三角形截面弹体的跳飞特性研究[J].兵器装备工程学报,2017,38(2):65-69,87. ZHANG C H, SHEN P H. Research on ricochet of projector with triangular cross section fragile projectile[J]. Journal of Ordnance Equipment Engineering, 2017, 38(2):65-69,87. (in Chinese) [14] 聂源.爆炸反应装甲对爆炸成型弹丸干扰机理及抗衡技术研究[D].北京:北京理工大学,2019:66-68. NIE Y. Interference mechanism of explosive reactive armor in explosively formed projectile and countermeasures[D]. Beijing:Beijing Institute of Technology, 2019:66-68.(in Chinese) [15] 王昕,蒋建伟,王树有,等.钨球对柱面带壳装药的冲击起爆数值模拟研究[J].兵工学报,2017,38(8):1498-1505. WANG X, JIANG J W,WANG S Y,et al.Numerical simulation on the initiation of cylindrical covered charge impacted by tungsten sphere fragment[J]. Acta Armamentarii,2017,38(8):1498-1505. (in Chinese) [16] 聂源,蒋建伟,李梅.球形装药动态爆炸冲击波超压场计算模型[J]. 爆炸与冲击, 2017, 37(5):951-956. NIE Y, JIANG J W, LI M.Overpressure calculation model of sphere charge blasting with moving velocity[J]. Explosion and Shock Waves, 2017, 37(5):951-956. (in Chinese) [17] 张奎华.穿甲弹弹托间隙啮合技术及其应用[D].南京:南京理工大学, 2006:1-2. ZHANG K H. The technology and application of the clearance meshing in the armor piercing projectile[D]. Nanjing:Nanjing University of Science and Technology,2006:1-2. (in Chinese) [18] 楼建锋. 侵彻半无限厚靶的理论模型与数值模拟研究[D].绵阳:中国工程物理研究院,2012:53-54. LOU J F. Theoretical model and numerical study on penetrating into semi-infinite targets[D].Mianyang:China Academy of Engineering Physics,2012:53-54. (in Chinese) [19] 葛超,董永香,冯顺山.弹丸斜侵彻弹道稳定性研究[C]∥第十三 届全国战斗部与毁伤技术学术交流会议集.黄山:北京理工大学, 2013:535-542. GE C, DONG Y X, FENG S S. Ballistic deflection on oblique penetration of projectiles with different noses[C]∥Proceedings of the 13th National Symposium on Warhead and Damage Technology. Huangshan:Beijing Institute of Technology,2013:535-542. (in Chinese)
|