Reliability Design and Analysis Methodfor Complex Mechanical System Based on Physics of Failure
LIU Qin1, JI Guangzhen1, CAO Pulin2, LI Juan1, LIU Ying1
(1.Ordnance Science and Research Academy of China,Beijing 100089,China;2.China Ordnance Industry Survey and Geotechnical Institute Co.,Ltd.,Beijing 100053,China)
LIU Qin, JI Guangzhen, CAO Pulin, LI Juan, LIU Ying. Reliability Design and Analysis Methodfor Complex Mechanical System Based on Physics of Failure[J]. Acta Armamentarii, 2022, 43(S1): 189-195.
[1] 胡晓义,王如平,王鑫,等.基于模型的复杂系统安全性和可靠性分析技术发展综述[J].航空学报,2020,41(6):140-151. HU X Y,WANG R P,WANG X,et al.Recent development of safety and reliability analysis technology for model-based complex system[J].Acta Aeronautica et Astronautica Sinica,2020,41(6): 140-151.(in Chinese) [2] BIELEN J,GOMMANS J J,THEUNIS F.Prediction of high cycle fatigue in aluminum bond wires: a physics of failure approach combining experiments and multi-physics simulations[C]∥Proceedings of the 7th International Conference on Thermal,Mechanical and Multi-physics Simulations and Experiments in Microelectronics and Microsystems.Como,Italy: IEEE,2006. [3] 朱顺鹏.高温复杂结构的混合概率故障物理建模与疲劳寿命预测[D].成都:电子科技大学,2012. ZHU S P.Research on hybrid probabilistic physics of failure modeling and fatigue life estimation of high-temperature structures[D].Chengdu:University of Electronic Science and Technology of China,2012. (in Chinese) [4] 毛黎明,杨先振.故障物理分析与机械可靠性(一)——机械产品劣化原因及能力降低与故障发生过程[J].航空标准化与质量,1999(4):43-45. MAO L M,YANG X Z. Physical analysis of failure and mechanical reliability(part one)-causes of deterioration,performance decrease and course of failure occuring of mechanical products [J].Aeronautic Standardization & Quality,1999(4):43-45. (in Chinese) [5] CHAMBERLAIN S S. Development of a physics of failure model and quantitative assessment of the fire fatality risk of compressed natural gas bus cylinders[D].City of College Park,MD,US:University of Maryland,2004. [6] 祝耀昌.可靠性故障物理技术及其应用[J].装备环境工程,2005,2(2):28-33. ZHU Y C.Physical methods of reliability failure and its application[J]. Equipment Environmental Engineering,2005,2(2):28-33.(in Chinese) [7] PECHT M,GU J. Physics-of-failure-based prognostics for electronic products[J].Transactions of the Institute of Measurement and Control,2009,31(3):309-322. [8] OH H,AZARIAN M H,PECHT M,et al.Physics-of-failure approach for fan PHM in electronics applications[C]∥Proceedings of Prognostics and System Health Management Conference.Macao,China: IEEE,2010. [9] MAGNIEZ C A A.Combining information flow and physics-of-failure in mechatronic products[D].Eindhoven,the Nethlands:Eindhoven University of Technology,2007. [10] 刘勤,孙志礼,钱云鹏,等.基于概率功能度量的疲劳可靠寿命分析方法[J].兵工学报,2016,37(8):1530-1535. LIU Q,SUN Z L,QIAN Y P,et al.Reliable fatigue life analysis method based on probabilistic performance measure[J].Acta Armamentarii,2016,37(8):1530-1535.(in Chinese) [11] 秦权,林道锦,梅刚.结构可靠度随机有限元-理论及工程应用[M].北京:清华大学出版社,2006. QIN Q,LIN D J,MEI G.Theory and applications-reliability stochastic finite element methods[M].Beijing:Tsinghua University Press,2006.(in Chinese) [12] 李良巧.机械可靠性设计与分析[M].北京:国防工业出版社,1998. LI L Q. Design and analysis of mechanical reliability [M].Beijing: National Defense Industry Press,1998.(in Chinese) [13] FAN J J,YUNG K C,PECHT M.Physics-of-failure based prognostics and health management for high power white light-emitting diode lighting[J].IEEE Transactions on Device and Materials Reliability,2011,11(3):407-416. [14] 王海朋,段富海.复杂不确定系统可靠性分析的贝叶斯网络方法[J].兵工学报,2020,41(1):173-184. WANG H P,DUAN F H.Bayesian network method for reliability analysis of complex uncertainty systems[J].Acta Armamentarii,2020,41(1):173-184.(in Chinese)