[1] 杨情操, 方德广, 李志建, 等. 基于降低油耗的风阻系数优化[J]. 轻型汽车技术, 2019(8/9): 16-19,28. YANG Q C, FANG D G, LI Z J, et al. Optimization of wind drag coefficient based on fuel consumption reduction[J]. Light Vehicles, 2019(8/9): 16-19,28. (in Chinese) [2] LIU X Z, HAN Y, CAI C S, et al. Wind tunnel tests for mean wind loads on road vehicles[J]. Journal of Wind Engineering and Industrial Aerodynamics, 2016, 150:15-21. [3] 李晋岭, 汪卫华. 基于流体力学数值模拟的装甲车热环境分析[J]. 装备环境工程, 2011, 8(1): 38-41. LI J L, WANG W H. Thermal environment analysis of armored vehicle based on numerical simulation of fluid dynamics[J]. Equipment Environmental Engineering, 2011, 8(1): 38-41. (in Chinese) [4] PIKULA B, MEIAC'U2 E, HODIAC'U2 M. Determination of air drag coefficient of vehicle models[C]∥Proceedings of International Congress-Motor Vehicles & Motors 2008. Kragujevac, Serbia: Faculty of Engineering, University of Kragujevac, 2008. [5] 田红旗. 风环境下的列车空气阻力特性研究[J]. 中国铁道科学, 2008, 29(5): 108-112. TIAN H Q. Study on the characteristics of train air resistance under wind environment[J]. China Railway Science, 2008, 29(5): 108-112. (in Chinese) [6] 李云龙, 赵长禄, 张付军, 等. 装甲车辆进排气格栅的气动特性试验研究与防护性能分析[J].兵工学报, 2012, 33(2): 129-133. LI Y L, ZHAO C L, ZHANG F J, et al. Arodynamic characteristics experimental study and proformance analysis for intake and vent grilles of armored vehicles[J]. Acta Armamentarii, 2012, 33(2): 129-133. (in Chinese) [7] 闫清东,张连第,赵毓芹,等. 坦克构造与设计(下册)[M]. 北京: 北京理工大学出版社, 2006. YAN Q D, ZHANG L D, ZHAO Y Q, et al. Tank construction and design, Volume II[M]. Beijing: Beijing Institute of Techno-logy Press, 2006. (in Chinese) [8] CHELI F, CORRADI R, SABBIONI E, et al. Wind tunnel tests on heavy road vehicles: cross wind induced loads—Part 1[J]. Journal of Wind Engineering and Industrial Aerodynamics, 2011, 99(10): 1000-1010. [9] 恽起麟. 实验空气动力学[M]. 北京: 国防工业出版社, 1991. YUN Q L. Experimental aerodynamics[M]. Beijing: National Defense Industry Press, 1991. (in Chinese) [10] 恽起麟. 风洞实验[M]. 北京: 国防工业出版社, 2000. YUN Q L. Wind tunnel testing[M]. Beijing: National Defense Industry Press,2000. (in Chinese) [11] CONTINI D, CESARI D, DONATEO A, et al. Effects of Rey-nolds number on stack plume trajectories simulated with small scale models in a wind tunnel[J]. Journal of Wind Engineering and Industrial Aerodynamics, 2009, 97(9/10): 468-474. [12] ZHU W J. Models for wind tunnel tests based on additive manufacturing technology[J]. Progress in Aerospace Sciences, 2019, 110: 100541. [13] 宋昕, 李舒雅, 严杰, 等. 数值风洞仿真与开阔路面仿真的关联性研究[J]. 汽车工程, 2020, 42(6): 759-764. SONG X, LI S Y, YAN J, et al. Study on correlation between digtial wind tunnel simulation and open road simulation[J]. Automotive Engineer, 2020, 42(6): 759-764. (in Chinese) [14] XUE F, WANG H Q, JIANG Z H. Derivation and verification of a similarity law for wind-tunnel free-flight tests of heavy-store separation[J]. Acta Astronautica, 2020, 174: 123-130. [15] EMIL L, SIMONE S, ALEXANDER B. Inclusion of the physical wind tunnel in vehicle CFD simulations for improved prediction quality[J]. Journal of Wind Engineering and Industrial Aerodynamics, 2020, 197: 104055.
下3篇留版
|