[1] DUFLOU J R, HABRAKEN A M, CAO J, et al. Single point incremental forming: state-of-the-art and prospects[J]. International Journal of Material Forming, 2017,11(2): 743-773. [2] BEHERA A K, DE SOUSA R A, INGARAO G, et al. Single point incremental forming: an assessment of the progress and technology trends from 2005 to 2015[J]. Journal of Manufacturing Processes, 2017, 27: 37-62. [3] RADU C, TAMPU C, CRISTEA I, et al. The effect of residual stresses on the accuracy of parts processed by SPIF[J]. Materials and Manufacturing Processes, 2013, 28(5): 572-576. [4] EDWARDS W L, GRIMM T J, RAGAI I, et al. Optimum process parameters for springback reduction of single point incrementally formed polycarbonate[J]. Procedia Manufacturing, 2017, 10: 329-338. [5] ESMAEILPOUR R, KIM H, PARK T, et al. Comparison of 3D yield functions for finite element simulation of single point incremental forming (SPIF) of aluminum 7075[J]. International Journal of Mechanical Sciences, 2017, 133: 544-554. [6] LU H B, LI Y L, LIU Z B, et al. Study on step depth for part accuracy improvement in incremental sheet forming process[J]. Advanced Materials Research, 2014, 939: 274-280. [7] LI Y L, LU H B, DANIEL W J T, et al. Investigation and optimization of deformation energy and geometric accuracy in the incremental sheet forming process using response surface methodology[J]. International Journal of Advanced Manufacturing Technology, 2015, 79(9): 2041-2055. [8] 范渊,李言,杨明顺,等. 金属板料单点增量成形的径向精度研究[J]. 机械强度, 2017, 39(2): 373-379. FAN Y, LI Y, YANG M S, et al. Research on radial accuracy in metal sheet single point incremental forming process[J]. Journal of Mechanical Strength, 2017, 39(2): 373-379. (in Chinese) [9] BEDAN A S, HABEEB H A. Experimental study the effect of tool geometry on dimensional accuracy in single point incremental forming (SPIF) process[J]. Al-Nahrain Journal for Engineering Sciences, 2018, 21(1): 108-117.
[10] TAHERKHANI A, BASTI A, NARIMAN-ZADEH N, et al. Achieving maximum dimensional accuracy and surface quality at the shortest possible time in single-point incremental forming via multi-objective optimization[J]. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 2018, 233(3): 095440541875582. [11] ALLWOOD J M, BRAUN D, MUSIC O. The effect of partially cut-out blanks on geometric accuracy in incremental sheet forming[J]. Journal of Materials Processing Technology, 2010, 210(11): 1501-1510. [12] HUSSAIN G, AL-GHAMDI K A, KHALATBARI H, et al. Forming parameters and forming defects in incremental forming process: part B[J]. Materials and Manufacturing Processes, 2014, 29(4): 454-460. [13] ASGHAR J, LINGAM R, SHIBIN E, et al. Tool path design for enhancement of accuracy in single-point incremental forming[J]. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 2013, 228(9): 1027-1035. [14] GUZMN C F, YUAN S B, DUCHNE L,et al. Damage prediction in single point incremental forming using an extended Gurson model[J]. International Journal of Solids and Structures, 2018, 151: 45-56. [15] FIORENTINO A, FERITI G C, GIARDINI C,et al. Part precision improvement in incremental sheet forming of not axisymmetric parts using an artificial cognitive system[J]. Journal of Manufacturing Systems, 2015, 35: 215-222. [16] LU H B, KEARNEY M, LI Y L, et al.Model predictive control of incremental sheet forming for geometric accuracy improvement[J].The International Journal of Advanced Manufacturing Technology, 2015, 82(9): 1781-1794. [17] LU H B, KEARNEY M, WANG C H, et al. Part accuracy improvement in two point incremental forming with a partial die using a model predictive control algorithm[J]. Precision Engineering, 2017, 49: 179-188. [18] SURESH K, NASIH H R, JASTI N V K, et al. Experimental studies in multi stage incremental forming of steel sheets[J]. Materials Today: Proceedings, 2017, 4(2): 4116-4122. [19] SHRIVASTAVA P, KUMAR P, TANDON P, et al. Improvement in formability and geometrical accuracy of incrementally formed AA1050 sheets by microstructure and texture reformation through preheating, and their FEA and experimental validation[J]. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 2018, 40: 335-350. [20] WEI H Y, ZHOU L S, HEIDARSHENAS B, et al. Investigation on the influence of springback on precision of symmetric-cone-like parts in sheet metal incremental forming process[J]. International Journal of Lightweight Materials and Manufacture,2019,2(2):140-145. [21] 杨明顺,肖旭东,姚志远,等. 1060铝板超声振动单点增量成形极限研究[J]. 兵工学报, 2019, 40(3): 601-611. YANGM S, XIAO X D, YAO Z Y, et al. Research on forming limit of 1060 aluminum sheet in ultrasonic vibration-assisted single point incremental forming [J]. Acta Armamentarii, 2019, 40(3): 601-611. (in Chinese) [22] SHALVANDI M, HOJJAT Y, ABDULLAH A, et al. Influence of ultrasonic stress relief on stainless steel 316 specimens: a comparison with thermal stress relief[J]. Materials & Design, 2013, 46: 713-723. [23] 柏朗,李言,杨明顺,等.超声振动-单点增量复合成形过程中成形力的分析与建模[J].机械工程学报,2019,55(2):42-50. BAIL, LI Y, YANG M S, et al. The analytical model of ultrasonic vibration single point incremental forming force[J].Journal of Mechanical Engineering, 2019,55(2):42-50. (in Chinese) [24] XU H F, YI P Y, AN W R, et al. Simulation and experimental study of sheet metal single point incremental forming force[J].Chinese Journal of Applied Mechanics, 2015, 32(6): 1062-1068.
第41卷第6期2020 年6月 兵工学报ACTA ARMAMENTARII Vol.41No.6Jun.2020
|