[1] 李冬杰, 陆善平, 李殿中, 等. 高氮钢焊缝的组织和冲击性能研究[J]. 金属学报, 2013, 49(2): 129-136. LI D J, LU S P, LI D Z, et al. Investigation of the microstructure and impact properties of the high nitrogen stainless steel weld[J]. Acta Metallurgica Sinica, 2013, 49(2): 129-136. (in Chinese) [2] SPEIDEL M O. Nitrogen containing austenitic stainless steels[J]. Materialwissenschaft und Werkstofftechnik, 2006, 37(10): 875-880. [3] LANG Y P, QU H P, CHEN H T, et al. Research progress and development tendency of nitrogen-alloyed austentic stainless steel[J]. Journal of Iron and Steel Research (International), 2015, 22(2): 91-98. [4] HERTZMAN S, WESSMAN S. An experimental and theoretical study of nitrogen flux in stainless steel TIG welds[J]. Materials Science Forum, 1999, 318/319/320: 579-590. [5] MOHAMMED R, REDDY G M, RAO K S. Welding of nickel free high nitrogen stainless steel: microstructure and mechanical properties[J]. Defence Technology, 2017,13(2):59-71. [6] WOO I, KIKUCHI Y. Weldability of high nitrogen stainless steel[J]. Transactions of JWRI, 2002, 31(2): 129-139. [7] CUI B, ZHANG H, LIU F D. Effects of shielding gas composition on the welding stability, microstructure and mechanical properties in laser-arc hybrid welding of high nitrogen steel[J]. Materials Research Express, 2018, 5(9):1-17. [8] 杜挽生, 彭云, 赵琳, 等. 高氮奥氏体不锈钢MIG焊接头的组织和性能[J]. 焊接, 2008(12):25-29. DU W S, PENG Y, ZHAO L, et al. Microstructure and mechanical properties of MIG welded joint of high nitrogen austenite stainless steel[J]. Welding and Joining, 2008(12):25-29. (in Chinese) [9] MOHAMMED R, REDDY G M, RAO K S. Microstructure and pitting corrosion of shielded metal arc welded high nitrogen stainless steel[J]. Defence Technology, 2015,11(3):237-243.
[10] IAMBOLIEV T, ZUMBILEV A, KALEV L, CHRISTOV S. Laser beam welding of high nitrogen containing austenitic stainless steel[J]. Welding Journal,1999,78(7):245-252. [11] ZHAO L, TAIN Z L, PENG Y. Porosity and nitrogen content of weld metal in laser welding of high nitrogen austenitic stainless steel[J]. ISIJ International, 2007, 47(12): 1772-1775. [12] 王立锋,刘凤德,刘薇娜,等. 高氮钢激光-电弧复合焊接气孔控制方法研究[J]. 机械工程学报,2016,52(20):51-59. WANG L F, LIU F D, LIU W N, et al. Study on control me-thods of welding porosity in laser-arc hybrid welding for high nitrogen steels[J]. Journal of Mechanical Engineering, 2016,52(20): 51-59. (in Chinese) [13] 李陈宾, 史吉鹏, 刘黎明. 低功率脉冲激光-电弧复合热源高效焊接过程中的"匙孔"行为研究[J]. 机械工程学报, 2016, 52(2): 41-46. LI C B, SHI J P, LIU L M. Study on laser keyhole behavior in high-efficiency low power pulsed laser-TIG hybrid welding process[J]. Journal of Mechanical Engineering, 2016, 52(2): 41-46. (in Chinese) [14] 刘凤德, 张宏, 杜劭峰, 等. 激光功率对CO2激光-MAG电弧复合焊电弧与熔滴行为的影响[J]. 机械工程学报, 2013, 49(4): 75-82. LIU F D, ZHANG H, DU S F, et al. Influence of laser power on arc and droplet behaviors in droplets on CO2 laser-MAG arc hybrid welding[J]. Journal of Mechanical Engineering, 2013, 49(4): 75-82. (in Chinese) [15] 胥国祥, 武传松, 秦国梁,等. 铝合金T型接头激光-GMAW复合热源焊温度场的有限元分析[J]. 金属学报, 2012, 48(9): 1033-1041. XU G X, WU C S, QIN G L, et al. Finite element analysis of temperature field in laser-GMAW hybrid welding for T-joint of aluminum alloy[J]. Acta Metallurgica Sinica, 2012, 48(9): 1033-1041. (in Chinese) [16] 陈实现, 刘双宇, 张宏, 等. 激光-电弧复合焊等离子体特性与焊缝熔深相关性研究[J]. 兵工学报, 2017,38(5): 978-985. CHEN S X,LIU S Y,ZHANG H, et al. Study on correlation between plasma property and weld penetration in laser-arc hybrid welding [J]. Acta Armamentarii, 2017,38(5): 978-985. (in Chinese) [17] KUWANA T. The oxygen and nitrogen absorption of iron weld metal during arc welding[M]. Advanced Joining Technologies: Proceedings of the International Institute of Welding Congress on Joining Research. Dordrecht, Netherlands: Springer, 1990: 117-128. [18] 赵琳, 田志凌, 彭云,等. 1Cr22Mn16N高氮钢激光焊接 I.焊接保护气体组成和热输入对焊缝氮含量及气孔性的影响[J]. 焊接学报, 2007, 28(8):89-91,95. ZHAO L, TIAN Z L, PENG Y, et al. Laser welding of high nitrogen steel 1Cr22Mn16N I. Influence of shielding gas composition and heat input on N2 content and porosity of weld metal [J]. Transactions of the China Welding Institution, 2007, 28(8): 89-91, 95. (in Chinese) [19] LU S P, FUJII H, NOGI K. Sensitivity of marangoni convection and weld shape variations to welding parameters in O2-Ar shielded GTA welding[J]. Scripta Materialia, 2004, 51(3): 271-277. [20] LU S P, FUJII H, NOGI K. Marangoni convection and weld shape variations in Ar-O2 and Ar-CO2 shielded GTA welding[J]. Materials Science and Engineering A, 2004, 380(1/2): 290-297. [21] XU C, SHENG G M, CAO X Z, et al. Evolution of microstructure, mechanical properties and corrosion resistance of ultrasonic assisted welded-brazed Mg/Ti joint[J]. Journal of Materials Science & Technology, 2016(12):45-51. [22] 蒋日鹏. 超声场对高强铝合金凝固过程的影响规律与作用机理研究[D]. 长沙:中南大学, 2014. JIANG R P. Effect rules and function mechanism of ultrasonic field on the solidification of high strength aluminum alloy[D]. Changsha:Central South University, 2014. (in Chinese)
第40卷 第11期2019 年11月兵工学报ACTA ARMAMENTARIIVol.40No.11Nov.2019
|